• 복식
• /
• 제55권5호
• /
• pp.101-107
• /
• 2005

In this article, mordant absorption rate by the Change of temperature and fabric, discharge level by water washing, mordant density and method in mordant dye are going to be handled. Besides, how treatment method will have an effect on absorption rate and color, is also going to be covered. An atom extinction photometer was used to measure the amount of mordant absorbed in fabric at each temperature and mordant type. It turned out that absorption rate differs according to the type of mordant and sample or temperature. Also it turned out that the mordant input amount has little influence on absorption rate, that is to say, if though you use more mordants, just tiny amount of mordant is going to be absorbed in cloth. It is true that the higher temperature goes up, the better mordant absorption gets. It is found that the type of mordant and sample, treatment period affects the discharge rate. Normally $15{\~}98\%$ mordant comes off the fabric by water washing, to be specific, $17{\~}47\%$ Iron by water washing and it has better performance on cotton and nylon than silk, $1\%{\~}52\%$ Aluminum by water washing and better absorption on silk, $36{\~}89\%$ Chrome by water washing and better absorption on silk, $50{\~}89\%$ copper by water washing and better absorption on silk, poor on cotton. The examination of the K/S values and colors between before and after soaping has been conducted under the circumstance that the test fabrics had been treated at $80^{\circ}C$ for 30 minutes with $0.2\%$ soaping solution. In case of pre-mordanted fabrics, the K/S value nosedived after soaping, meanwhile densely mordanted fabric's K/S value soared but after soaping, it dropped sharply. It turned out that soaping treatment deteriorates absorption much more than water washing. It's considered that $0.1 \%$ (W/V) of mordant density is appropriate.

• 디자인학연구
• /
• 제19권2호
• /
• pp.251-260
• /
• 2006

산업의 발달은 제품 성능의 대형화와 다기능화를 가능케 하였지만 복잡성을 가중시켜 제품의 사용편의성 문제가 항상 이슈로 등장한다. 따라서 효과적인 사용자-제품 상호작용을 개선시키는 중요한 설계요소 중의 하나가 사용자의 인지적 특성을 인터페이스 설계에 반영하는 것이다. 본 연구는 대표적 생활 가전제품의 하나인 세탁기의 인터페이스를 사용자의 상호작용방식을 기준으로 평가하고자 한다. 세탁기는 수많은 기능들이 메뉴 구동방식으로 제공되므로 먼저, 설문조사단계에서 경로발견알고리즘을 사용하여 사용자가 선호하는 새로운 메뉴구조를 제시하였다. 두 번째 단계에서는 이와 같은 사용자와 설계자의 메뉴구조 차이를 비교하기 위하여 세 제품을 선택한 후 작업 수행도를 평가하였고 실험작업 동안 각 제품이 제공하는 기능들의 구동방식 및 경로를 응용 상태전이도로 표현하였다. 그리고 사용자가 세 제품에서 공통적으로 선호하는 구동방식 및 작업경로를 상태전이도로 작성하였다. 그 결과, 실험작업에서 사용자가 갖는 구동방식과 작업경로는 설계자의 요구사항과 달랐지만 설문조사단계에서 확인된 인지적 메뉴구조의 구동방식과 일치함을 입증할 수 있었다. 연구의 결과는 설계자가 예상치 못한 메뉴구동방식을 제공함으로써 제품 기능의 활용도를 높이고 사용자를 위한 세탁기 인터페이스의 디자인 개선 방안으로 활용될 수 있을 것이다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.337-339
• /
• 2003

The technology removing radionuclides from soil using soil washing was studied. The main radionuclides contaminated in the soil are Cs$^{137}$ and Co$^{60}$ . It is suitable that scrubbing time is 4 hours and a mixing ratio of soil weight and washing solution volume is 1:10. more than two times continuous scrubbing method with 0.5 M oxalic acid was needed to remove Cs$^{137}$ and Co$^{60}$ from soil more than 70%. Radionuclides removal efficiencies of recycling washing solutions recycled with strong acid resins until 5 times are similar to that of 0.5 M oxalic acid.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권4호
• /
• pp.13-20
• /
• 2010

The purpose of this study was to develope the remediation method of contaminated soils with metals and petroleum. The diesel degrading strain was isolated and identified from the soil contaminated by petroleum at industrial sites. Diesel biodegradation experiment was performed by diesel degrading bacteria in both solution and soil slurry. Contaminated soils by Zn or As and diesel were treated consecutively by steam-vapor extraction, biodegradation, and acid washing. The strain was identified as Pseudomonas aeruginosa, and named as Pseudomonas aeruginosa TPH1. The optimal culture conditions of TPH1 were $20^{\circ}C$ and pH 7.0, 3% of diesel concentration. Biodegradation of diesel was performed using the separated strain in liquid medium, and 63% of diesel was degraded in 72 hours. And 52% of diesel was removed in the tested soils. In the treatment of contaminated soils with diesel and Zn or As, 29% ~ 44% of diesel was reduced by steamvapor extraction, 60% ~ 71% of diesel was removed after biodegradation. 47% of Zn and 96% of As were removed after acid(mixture of sulfuric and oxalic acids) washing. It is recommended that consecutive treatment method of steam-vapor extraction, biodegradation and acid washing is effective for remediation of complex contaminated soils with metals and petroleum.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.8-15
• /
• 2012

Optical property improvements for ONP (old newspaper) and OMG (old magazine) were attempted by application of in-situ $CaCO_3$ formation process on recycled fiber surfaces. Washing treatment of ONP and OMG resulted in 35~40% yield loss for around 6% brightness improvement. Washing plus bleaching process with $H_2O_2$ and FAS (formamidine sulfinic acid) improved brightness and ERIC values a little more with the same amount of yield loss as washing treatment. In-situ $CaCO_3$ formation method improved those optical properties much better than the washing plus bleaching method without loss of yield, and better than the case of adding high brightness PCC up to the same ash level. It can be said that the in-situ $CaCO_3$ formation method may be used as an effective alternative for upgrading optical properties of recycled fibers.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.148-151
• /
• 2003

Soil washing was applied as a supplementary step of soil remediation at a petroleum oil contaminated site. A soil washing system was designed, assembled, and operated at the site. A field screening method with PetroFlagTM was adopted at the site to find the exact boundary of contaminated area as soil excavation progressed and to verify the concentration of treated soil. The system operation showed the cleanup efficiency of 90% at the compatible cost compared to other methods.

• 성인간호학회지
• /
• 제14권1호
• /
• pp.26-33
• /
• 2002

Purpose: This is a clinical experimental study aimed to provide basic data to ensure quality care. The purpose of this study is to increase nurses hand washing behavior and decrease respiratory isolation rate of MRSA. Method: This study was conducted in Kangnam St. Marys hospital. The subjects included 5 nurses working at the NS ICU and 165 specimen for nasal swabs and 46 specimen for sputum cultures from 106 patients admitted to the NS ICU. The data were collected from June to September 2000. Results: 1.The percentage of the nurses hand washing was 15.6percent but was improved to 46.5 percent after the educational intervention. In particular, hand washing behavior was increased in situations such as after suctioning, before parenteral nutrition, and after providing hygiene care. 2. Results of nasal swab showed that MRSA isolation rate was reduced from 42.8 percent before the education to 18.6percent after the education. The sputum culture results also showed that the MRSA rate was reduced from 40.7percent before the education to 34.6percent after the education. Conclusion: The findings showed the nurses' strict hand washing behavior and use of disposable gloves and paper towers as well as use of hand sterilization spray by visitors or families can decrease the MRSA isolation rate in the NS ICU patients. Since the NS ICU patients may have respiratory complications due to long-term hospitalization, the nurses regular hand washing is important enough to be emphasized. Future research should be focused on the impact of nurses' hand washing behavior on the incidence of pneumonia, an iatrogenic infection.

• 한국토양환경학회지
• /
• 제4권2호
• /
• pp.87-101
• /
• 1999

토양세척 기법은 금속-리간드 착물형성을 촉진하여 오염토양으로부터 중금속을 제거하는 효과적인 방법으로 알려져 있다. 본 연구는 폐금속광산 광미와 그 후면 농경지토양의 중금속 오염도 저감에 대한 세척기랩의 적용효과를 검토하기 위해 수행되었다. 실험에 사용된 일부시료에서 구리와 납의 오염도는 토양오염 우려기준 및 대책기준을 초과하였으며 또 다른 시료에서는 카드뮴이 대책기준에 근접하는 오염도를 보였다. 토양시료에 단계적 추출법을 적용하여 실험한 결과에 따르면 광미와 주변토양시료에 존재하는 중금속의 절반 이상이 식물이용가능성 있는 흡착된 형태로 존재함이 밝혀졌다. 또한 단계석 추출법으로 조사한 몇 가지 형태의 중금속 농도와 0.1N HCI 용출실험에서 구한 농도 사이에는 비례관계가 성립하였다. 유기산별 세척능력 비친실험에서 구연산은 위의 세 가지 중금속 모두에 대하여 초산이나 옥살산에 비해 월등한 세척효율을 나타내었다. 그리고, 구연산을 사용하여 토양으로부터 중금속을 세척할 때 세척액의 pH를 5.5이하로 하면 보다 나은 세척효율을 얻을 수 있었다. 구연산 세척법을 이용한 중금속 세척시 효율은 세척액 농도, (세척액/토양)혼합비, 그리고 세척액의 초기 pH에 의존하여 달라졌다. 구연산에 SDS를 같이 투입하여 세척하면 세 가지 중금속 중에서 카드뮴의 세척효율이 가장 크게 개선되었으며 구리 제거율은 변화되지 않았다. 이상에서 알 수 있듯이 구연산 세척기법은 광미와 중금속 오염토양으로부터의 중금속 제거에 적용 가능한 정화방법임이 확인되었다.

• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.436-443
• /
• 2007

In this paper, an intelligent method called BELBIC (Brain Emotional Learning Based Intelligent Controller) is used to control of Locally Linear Neuro-Fuzzy Model (LOLIMOT) of Washing Machine. The Locally Linear Neuro-Fuzzy Model of Washing Machine is obtained based on previously extracted data. One of the important issues in using BELBIC is its parameters setting. On the other hand, the controller design for Washing Machine is a multi objective problem. Indeed, the two objectives, energy consumption and effectiveness of washing process, are main issues in this problem, and these two objectives are in contrast. Due to these challenges, a Multi Objective Genetic Algorithm is used for tuning the BELBIC parameters. The algorithm provides a set of non-dominated set points rather than a single point, so the designer has the advantage of selecting the desired set point. With considering the proper parameters after using additional assumptions, the simulation results show that this controller with optimal parameters has very good performance and considerable saving in energy consumption.

• 한국생활과학회지
• /
• 제9권1호
• /
• pp.33-45
• /
• 2000

The handle were observed by objective and subjective method as the washing was repeated for 4 kinds(sample A, B, C, D) of materials which have different water vapor transmission, and the change of water vapor transmission each others. The results of factor analyses for 18 polar adjective words on subjective handle test yielded 4 factors, that were 'elastic property', 'surface property', 'thickness and weight property' and 'thermal and rigid property'. The surface properties were deteriorated remarkably as washing was repeated and significant difference were observed. Compared with the primary hand value for each materials, the statistical difference of samples was shown at Koshi and Fukurami measured by the KES-FB system. Koshi decreased for all the materials after repeated washing, and Fukurami had a tendency to increase for all the materials in proportion to repeated washing. Significant difference of total hand value wasn't shown in repeated washing number, but in fabric types.