• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.223-230
• /
• 2017

Three super hydrophobic fluorescence dyes were selected to dye high molecular weight polyethylene fiber and their molar absorptivity, emission spectrum, and quantum yield were measured. From the results of color strength on the fiber, all the three dyes exhibited linear increase according to the dye concentration and Fluoro3 dye showed the highest color strength among them. Emission strength of the fluorescence dyes on the fiber was investigated according to the dye concentrations. The emission was increased with the increase of the dye concentration at relatively low dye concentration and then after showing the maximum emission strength the emission was decreased at higher dye concentrations. The highest emission was obtained in Fluoro2 dye. Color fastness to washing and rubbing was generally good enough, however, especially to light, only Fluoro3 dye exhibited rating 3 acceptable practically and Fluoro1 and 2 was ratings 1 which is unacceptable level.

• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.89-95
• /
• 2020

In this study, the efficacy of Amaranth(Amaranthus spp. L.) as a natural dye resource was investigated for wool fabrics. It is known that a large amount of flavonoid and anthocyanin colorant are contained in leaves and stems, as well as red flowers. The optimum condition of dyeing was 1.3% of dye concentration(o.w.b.) at 100℃ for 60 minutes, resulting the K/S value, 23.43 and R Munsell color on the wool fabrics. Al, Fe, Zinc and Titanium were used as a mordant. The mordant improved the dye uptake, regardless of the mordant type and mordant method. The pre-mordanting method was more effective than the post-mordanting method. Al pre-mordanted fabric showed the highest K/S, 30.02. Light fastness and washing fastness were high in grades 4-5 and 5, and rubbing fastness was good in grades 4 and 4-5 in dry condition, but low in grades 2-3 and 3 in wet condition. The dry cleaning fastness was excellent in all 5 grades. However, the alkaline perspiration fastness ratings were low in grades 2-3 and 3. The results show Amaranthus spp. L. colorant can be used as a functional natural dye for wool fabrics.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.210-218
• /
• 2018

The natural dye product market is expanding due to the recent interest in environmentally friendly products. This study examines dyeing using natural Coptidis Rhizoma. Chitosan and Tannin was treated to improve dyeability of Coptidis Rhizoma after finding the proper dyeing condition. In addition, dyeing characteristics were compared according to mordant types along with the mordanting methods for dye fixing and color change. The results indicated that the optimum dyeing condition was to treat the concentration of 5% (o.w.b.) at $80^{\circ}C$ for 90 minutes. By the chitosan and tannin treatments, K/S value of cotton fabrics by 3 times and those of wool fabrics by 2 times increased and color depthing of dyed fabrics was achieved after 2 cycles repetition. To improve dyeability, iron mordanting was most effective; in addition, the K/S Value of pre-mordanting fabrics versus post-mordanting fabrics increased the most. The color of the surface was changed to reddish yellow when Sn, Cu mordanting, and to greenish blue when Fe mordanting. The lightfastness of dyeing fabric with mordanting was weak at 1-2 grades, but the washing fastness was good for 4 grades and the rubbing fastness and sweat fastness were as good as those of the 3-4 grades. As a result, this study could help improve the dyeability of expensive Coptidis Rhizoma.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.150-157
• /
• 2018

The purpose of this study is to investigate the proper dyeing condition, color fastness and functionality of silk fabrics dyed with Zizania latifolia Turcz. FT-IR spectrum analysis suggests that colorants of Zizania latifolia Turcz. are tannins. The dyeing of the silk fabrics using Zizania latifolia Turcz. was very good even without pretreatment or mordanting treatment. Optimal dyeing conditions of silk fabrics were colorant concentration of 200%(o.w.f.), dyeing temperature of $100^{\circ}C$, dyeing time of 60 minutes and dyebath pH of 5.5. Color fastness of dyed silk fabrics to washing, rubbing, perspiration and light was 4~4-5, 5, 4~4-5(acidic), 4-5(alkaline) and 2 respectively. UV protection rate and deodorization rate of silk fabrics dyed with Zizania latifolia Turcz. were improved. Reduction rate(Staphyloccus aureus) of silk fabrics was excellent at 98.3%. As a result, it was confirmed that the Zizania latifolia Turcz. could be used as an eco-friendly functional natural dye.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.142-148
• /
• 2015

The aim of this study was to investigate the possibility utilizing Metasequoia(Metasequoia glyptostroboides) cone as a new natural dye resource. Dyeing onto cotton fiber was carried out to study the effect of dyeing conditions and mordanting effect on dye uptake, color change, and colorfastness. FT-IR analysis supported that hydrolyzable tannins were contained in the extracted colorant. Metasequoia cone colorant showed low affinity to cotton fiber and maximum dye uptake was obtained at pH 3.5 showing YR Munsell color. Mordanting improved dye uptake regardless of mordant type, especially Fe($C_5H_{10}FeO_6$) mordant was effective as much as 2 times higher dye uptake comparing with un-mordanted sample. The color of dyed fabric with mordanting showed YR Munsell color except of the Fe($FeSO_4{\cdot}7H_2O$) mordanted sample showing Y Munsell color. Colorfastness to rubbing and washing was relatively good, whereas lightfastness of the dyed fabrics was above grade 3/4 except that the dyed samples with Fe mordanting showed grade 2. It is necessary to apply Metasequoia cone colorant onto other fibers, especially protein fibers, for evaluating its efficacy as a new natural dye resource.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.233-240
• /
• 2019

Dyeing is an essential process for improving the value of textile products, but it is considered as one of industries causing pollution because of producing wastewater containing hazardous chemicals as well as using a large amount of water and energy. Global demand for greener technologies in textile field is getting much more attention and accordingly, the use of eco-friendly natural dyes is growing much larger. In textile printing, both dyes and pigments can be used. Pigment printing is more simple process and requires less water and less energy, compared to dye printing. In this study, the organic pigment was prepared from the marigold colorant. Samples were stencil printed, pressed(70℃, 3min) and then heat treated(150℃, 5min). The uptake of polyacrylic acid as a chemical binder was the lowest. In particular, marigold pigments were excellent in color and texture when Guar Gum and Sodium Alginate were used as binders. In addition, the light and washing fastness was rated very high as 4, 4/5 grades, and the rubbing fastness was also excellent as 3 and 4 grades.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.249-257
• /
• 2019

Baker's yeast(Saccharomyces cerevisiae) was used as a biocatalyst for eco-friendly indigo dyeing and the reducing power of yeast according to the alkaline solution type was compared. NaOH solution, lye, and buffer solution were used as alkaline solutions. The reducing power(K/S value, oxidation/reduction potential(ORP), pH) was monitored according to the elapsed time including the initiation of reduction, peak reduction, and the end of reduction. In all alkaline solutions, it was confirmed that yeast can be used reducing agent in indigo reduction dyeing. The pH stability and reducing power of buffer solution was better than that of NaOH alone. Although, pH and ORP stability of the reduction bath in lye were better than that of buffer solution, K/S value in buffer solution was higher compared to lye. The reducing power was different depending on the starting pH of the dye bath, and it was better when starting at pH 10.70 than at pH 11.30. Fastnesses to washing, rubbing, and light were relatively good with above rating 4. There was no significant difference in colorfastness depending on the type of alkaline solutions.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.208-215
• /
• 2018

The objective was to investigate the efficacy of Metasequoia(Metasequoia glyptostroboides) cone colorants as a new functional dye for wool fiber. Effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated for wool fiber. Compared with cotton and silk fibers, wool fiber showed better affinity for the Metasequoia cone colorants. Fe and Cu mordants improved dye uptake, and mordanting did not change the color of dyed fabric with YR Munsell color. Colorfastness to rubbing and washing was as good as grade 4, whereas lightfastness of the dyed fabrics was above grade 3. Antimicrobial activity of the colorants was very high 99.3% of reduction rate toward S. aureus. It was confirmed that Metasequoia cone colorants can be utilized as a new functional natural dye for wool fiber. In addition, considering its high antimicrobial functionality it could be applied to cosmetics and food.

• Journal of the Korean Home Economics Association
• /
• v.35 no.3
• /
• pp.115-124
• /
• 1997

In this study, Water Repellent Finish was carried out before dyeing on cotton fabrics. It was aimed to improve on dyeing properties of cotton fabrics with direct dye. The results obtained were summerized as follows: 1. The K/S value of water repellent finished cotton fabrics increased. This phenomena in water repellent finished cotton fabrics were much more noticiable than unfinished cotton fabrics. 2. The color fastness(light, washing, and rubbing) of water repellent finished cotton-dyed were worse than those of unfinished cotton-dyed with direct dye. △E of water repellent finished cotton fabrics wasn't showed significant difference as compared with that of unfinished cotton fabrics. 3. The water repellency of finished cotton after dyeing got down from 100 to 70. That of finished-cotton before dyeing was 100. 4. Moisture regain, stiffness and weight of finished cotton fabrics were not almost differenciated with unfinished cotton fabrics. Moreover, the tensile strength of finished cotton fabrics was increased compared to that of unfinished cotton fabrics. As conclusion, according to the above results when the cotton fabrics were dyed with direct dye, it was much more effective that water repellent finished cotton fabrics were dyed rather than trational process, that is pre-dyeing after-finishing even if, by low liquor ratio. The physical properties of fabrics were maintained or increased.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.473-477
• /
• 2004

Cotton fabric was treated with Cationon UK(tertiary ammonium salt) to improve the dyeability to black tea colorants. In order to investigate the efficacy of Cationon UK for improving dyeing properties of cotton fabric, the effect of Cationon UK treatment conditions and dyeing conditions on dye uptake of the cotton fabrics treated with Cationon UK were examined and the colorfastness to washing, perspiration, rubbing and light was also evaluated for practical uses. Cationized cotton treated with Cationon UK showed high dye uptake at lower dyeing concentration and shorter dyeing time, compared with untreated. Dyeing temperature did not affect significantly dye uptake and the maximum dye uptake was obtained at pH 5. Most colorfastness was relatively good, showing 4/5∼5 rating.