• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.79-89
• /
• 1995

Rattle noise occurs at manual transmission as idling and driving of a automotive. It can be solved by torsional characteristics of a clutch disc. A clutch disc consist of a region of pre-damper and main-damper. Rattle noise is affected by pre-damper and main-damper equipped for a torsional spring and friction washer. Pre-damper range covers noise radiating from manual transmission when engine is idling and main-damper range covers noise when engine is driving. The aim of this reserch is to clear transmission rattle noise by way of torsional characteristics of a clutch disc. The experiment is carried out as idling and driving of a automobile equipped for 1.5L MPI engine, dry single-disc type clutch and manual transmission. In this study, the results show for a vibration of manual transmission as idling and driving can be cleared by a clutch disc of Pre-damper type.

• 한국소음진동공학회논문집
• /
• 제25권1호
• /
• pp.24-32
• /
• 2015

Pulse tube-type spaceborne cryocooler is widely used to cool down the infrared sensor of observation satellites. However, such cryocooler also generates micro-vibration which is the one of main sources to seriously affect the image quality during its on-orbit operation. Therefore, to comply with the mission requirement of high resolution observation satellite, additional technical efforts have been required. In this study, we proposed a spaceborne cryocooler passive vibration isolator using SMA mesh washer, which guarantees the structural safety of both the micro-vibration disturbance source and itself under harsh launch vibration loads without an additional holding mechanism and the micro-vibration isolation performance on orbit environment. To verify the micro-vibration isolation performance of the proposed vibration isolator, we performed the micro-vibration isolation measurement test using the dedicated micro-vibration measurement device proposed in this study.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.643-651
• /
• 2011

본 논문에서는 전단하중을 받는 다양한 알루미늄 샌드위치 체결부의 파손 특성에 대한 시험 연구를 수행하였다. 3종류의 인서트 형식 체결부와 2종류의 포팅 형식 체결부에 대해 총 60개의 시편을 제작하여 시험을 수행하였다. 시험 결과, 인서트 형식 체결부의 경우 쓰루 클리어런스(through-clearance) 인서트를 사용한 경우의 파손하중이 가장 높게 나타났으며 포팅 형식 체결부의 경우 딤플 와셔(dimple washer)가 있을 때 전단하중이 약10% 향상되는 것을 확인할 수 있었다. 예상대로 면재의 두께가 증가할수록 전단파손하중도 증가하고, 특히 하중치구와 접촉하고 있는 상부 면재의 효과가 지배적인 것을 확인하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1306-1311
• /
• 2009

In recent semiconductor manufacturing clean rooms, in order to improve clean room air quality, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from the outdoor air introduced into clean room. Meanwhile, there is a large amount of exhaust air from a clean room. From an energy conservation point of view, heat recovery is therefore useful for reducing the outdoor air conditioning load for a clean room. Therefore it is desirable to recover heat from the exhaust air and use it to reheat the outdoor air. In the present study, numerical analysis and experiment was conducted to simulate the amount of energy reduction of exhaust air heat recovery type air washer system. The present numerical results showed good agreement with the results of the experimental data.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.517-524
• /
• 2014

Micro-vibration induced by on-board equipments such as fly-wheel and cryogenic cooler with mechanical moving parts affects the image quality of high-resolution observation satellite. Micro-vibration isolation system has been widely used for enhancing the pointing performance of observation satellites. In general, the micro-vibration isolation system requires a launch locking mechanism additionally to guarantee the structural safety of mission payloads supported by the isolation system with low stiffness under launch environment. In this study, we propose a passive launch and on-orbit vibration isolation system using shape memory alloy mesh washers for the micro-vibration isolation of spaceborne compressor, which does not require the additional launch locking mechanism. The basic characteristics of the isolator were measured in static and free vibration tests of the isolator, and a simple equivalent model of the isolator was proposed. The effectiveness of the isolator design in a launch environment was demonstrated through sine vibration, random vibration and shock tests.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 추계 학술발표대회 논문집
• /
• pp.264-265
• /
• 2005

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.208-208
• /
• 2007

• 한국강구조학회 논문집
• /
• 제22권1호
• /
• pp.21-31
• /
• 2010

본 연구에서는 구조 케이블의 인장력 모니터링을 위한 무선 임피던스 센서노드를 개발하였다. 이를 위해 다음과 같은 연구가 수행되었다. 첫째, 경제적이고 자동화된 구조 케이블의 인장력 모니터링을 위한 무선임피던스 센서노드를 설계/제작 하였다. 둘째, 자동화된 인장력 모니터링을 위해 임피던스 기반 모니터링 기법을 무선 센서노드에 내장하였다. 셋째, 측정 범위가 제한적인 무선임피던스 센서노드의 한계점을 극복하기 위하여 인터페이스 와셔를 이용하는 구조케이블 인장력 모니터링 기법을 제안하였다. 마지막으로 내장형/외장형 텐던을 가지는 모형 프리스트레스트 콘크리트 거더에 대하여 무선임피던스 센서노드와 인터페이스 와셔를 이용하는 모니터링 기법의 적용성을 평가하였다.

• Progress in Superconductivity
• /
• 제2권1호
• /
• pp.1-5
• /
• 2000

We have developed an extremely sensitive radio frequency amplifier based on the dc superconducting quantum interference device (dc SQUID). Unlike a conventional semiconductor amplifier, a SQUID can be cooled to ultra-low temperatures (100 mK or less) and thus potentially achieve a much lower noise temperature. In a conventional SQUID amplifier, where the integrated input coil is operated as a lumped element, parasitic capacitance between the coil and the SQUID washer limits the frequency up to which a substantial gain can be achieved to a few hundred MHz. This problem can be circumvented. by operating the input coil of the SQUID as a microstrip resonator: instead of connecting the input signal between the two ends of the coil, it is connected between the SQUID washer and one end of the coil; the other end is left open. Such amplifiers have gains of 15 dB or more at frequencies up to 3 GHz. If required, the resonant frequency of the microstrip can be tuned by means of a varactor diode connected across the otherwise open end of the resonator. The noise temperature of microstrip SQUID amplifiers was measured to be between 0.5 K $\pm$ 0.3 K at a frequency of 80 MHz and 1.5 K $\pm$: 1.2 K at 1.7 GHz, when the SQUID was cooled to 4.2 K. An even lower noise temperature can be achieved by cooling the SQUID to about 0.4 K. In this case, a noise temperature of 100 mK $\pm$ 20 mK was achieved at 90 MHz, and of about 120 $\pm$ 100 mK at 440 MHz.

• 한국강구조학회 논문집
• /
• 제23권5호
• /
• pp.629-636
• /
• 2011

본 연구는 압전 센서를 이용한 구조물의 실시간 모니터링과 강구조물 볼트접합부의 동적 컨트롤이 가능한 자가치유 시스템에 관한 것이다. 볼트접합부의 볼트 풀림 손상 탐색을 위해서 압전 물질의 전기역학적 커플링 성질을 이용하는 임피던스 기반의 구조물건전성평가 기법을 이용하였다. 계측된 임피던스 값을 기준치 값과 비교함으로써 볼트 풀림 손상 진단이 가능하다. 볼트 풀림 손상은 손상지수를 이용하여 정량적으로 평가되어지고, 손상이 진단되면 형상기억합금 와셔에 감겨있는 외부히터가 와셔에 열을 가하게 된다. 열이 가해진 형상기억합금 와셔는 축방향으로 팽창하고, 볼트접합부는 볼트풀림으로 인해 잃어버린 토크력을 회복하게 된다. 압전 센서를 이용한 임피던스 기반의 구조물건전성 평가기법과 형상기억합금 기반의 볼트접합부 동적 컨트롤 기능과 이를 이용한 자가치유 볼트접합부 시스템의 적용가능성과 성능을 실험을 통해 평가하였다.