• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.86-98
• /
• 2002

When the quality and cooking characteristics of wash free rice was compared with those of control milled rice during storage, smaller quality change during storage and more easy to cook was found in wash free rice than control. The wash free rice equipment manufactured in foreign country was carefully investigated and commercial wash free rice equipment with 1metric ton per hour capacity was made considering the characteristics of domestic rice cultivar. Modification of the equipment was made through the repeated field test, and the technique on wash free rice equipment was transferred to the RICETECH. These systems were manufactured in RICETECH will be exported to China next year.

• Corrosion Science and Technology
• /
• v.15 no.4
• /
• pp.189-197
• /
• 2016

It is a common practice to conduct periodic washes at designated intervals in order to prevent the atmospheric corrosion of aircraft. The wash interval depends on the atmospheric conditions, but the wash intervals set by the U.S. Air Force were widely adopted in Korea without detailed knowledge of the background data. Therefore, it is necessary to determine our own wash intervals representing the atmospheric and geographical conditions in Korea. This study analyzed previous wash interval algorithms and atmospheric data in Korea. New wash intervals are then proposed based on the corrosion rate equation in ISO-9223:2012. Atmospheric corrosion testing was conducted using 7075 and 1050 aluminum alloy specimens to verify the accuracy of the corrosion rate equation in ISO-9223:2012. Test results showed a reasonable agreement with the corrosion rates predicted by the equation.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.72-85
• /
• 2002

When the quality and cooking characteristics of wash free rice was compared with those of control milled rice during storage, smaller quality change during storage and more easy to cook was found in wash free rice than control. The wash free rice equipment manufactured in foreign country was carefully investigated and commercial wash free rice equipment with 1metric ton per hour capacity was made considering the characteristics of domestic rice cultivar. Modification of the equipment was made through the repeated field test, and the technique on wash free rice equipment was transferred to the RICETECH. These systems were manufactured in RICETECH will be exported of China next year.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.138-144
• /
• 2011

Purpose: The purpose of this study was to evaluate the cleansing effect of recently developed alkaline ionized water, e-WASH, on microorganisms of the denture surface. Materials and methods: Removable partial and complete dentures were randomly assigned to the experimental group of 41 dentures, and the control group of 26. The denture was immersed in the e-WASH solution (experimental group), or tap water (control group) for 5 minutes. The plaque was collected from the denture surface before and after immersion, and smeared on the slide glass. Amount and motility of microorganisms were compared according to the morphology and strain of microorganisms, using the phase contrast microscope. Statistical analysis was accomplished with paired t-test and independent t-test at 95% confidence level (P<.05). Results: 1. The amount of cocci, bacilli, filamentous, spiral/comma, and the motility of bacilli, filamentous, and spiral/comma were decreased after denture cleansing with the alkaline ionized water, e-WASH (P<.05). But in the control group, only the amount of cocci showed a significant difference (P<.05), but no difference from the others. There were no differences in other analysis. 2. In the experimental group, the amount of cocci, bacilli, filamentous, spiral/comma, and the motility of bacilli, filamentous, and spiral/comma were smaller and more inactive compared to the control group (P<.05). Conclusion: These results indicated that the alkaline ionized water, e-WASH could effectively reduce the amount and motility of the experimented microorganisms on the denture surface, and that e-WASH could be recommended as an effective denture cleanser.

• Journal of Korean Dental Science
• /
• v.1 no.1
• /
• pp.22-27
• /
• 2008

Purpose : This study sought to evaluate the dimensional stability of the SITT (Silicone Index Tooth Tray) impression system and to determine whether providing space for wash impression material in SITT is a necessary step in obtaining accurate prostheses. Materials and methods : After mounting metal dies with shoulder and chamfer margins arbitrarily, SITT was fabricated using Blu-mousse$^{(R)}$. To test the dimensional stability of the SITT system for margin design, the shoulder margin and chamfer margin were evaluated. Furthermore, to test the effect of space for wash impression material, 0.5mm space in SITT and zero space in SITT were statistically compared. Results : 1. There was no significant difference between the group with shoulder margin and that with chamfer margin. 2. There was no significant difference between the group with 0.5mm space and that with zero space for wash impression material. Conclusions : Considering the limitations of this study, the dimensional stability of the SITT system did not interfere with the margin design. Space for the wash impression material was also unnecessary.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.4
• /
• pp.349-354
• /
• 2017

In this study, we proposed a design guideline of height-adjustable wash basin which is an assistive product for personal hygiene for persons with disability. We performed biomechanical assessments using both of conventional and prototype height adjustable wash basin. Total five elderly subjects (all male, age $68.6{\pm}4.3yrs.$, height $169.8{\pm}5.7cm$, weight $70{\pm}7.7kg$) participated for the assessment test. Each joint angles were measured by using a 3D motion capture system when subjects use wash basins, and the lumbar moment of each subjects was estimated based on a human body model. From the assessment results, a design guideline which has the range of the height from 652[mm] to 1162[mm] was proposed. Then additional assessment tests with five healthy subjects ($25.8{\pm}1.8yrs.$, $175.5{\pm}5.8cm$, $74{\pm}15.7kg$) were performed in order to verify effectiveness of the design guideline. The results showed a height-adjustable wash basin applied the proposed design guideline was effective to reduce the lumbar moment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.83-84
• /
• 2016

For the slip resistance test of shower room floor, the "O-Y Pull Slip Meter method (O-Y·PSM)" regulated under KS M 3510. This test method uses cooking oil as a substitute of soapy water, and thus it does not reflect the real condition. In this study, on 10 types of floor material samples, the Coefficient of Slip Resistance Bath (CSR·B) on bare foot between 10 types of body wash solution and 6 types of SDS solution was compared. The body wash solution is a mixture of soap and water in 1:20 ratio. As a result, SDS 0.1% solution was the most suitable for a substitute of soapy water in shower.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.191-199
• /
• 2000

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined the impression quality in clinical condition and the wettability of impression and die material. Four commercially available addition silicone impression material (Express, Examix, Contrast, Perfect) and three die materials (Die-Keen, Vel-Mix, Fuji-Rock) were studied. A total of 50 putty/wash and heavy body/wash impressions of wet intact permanent molar teeth were examined for definition of the gingival sulcus reproduction and then classified in quality ranking. The percentage of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned epoxy resin casts from the impressions and clinically measured sulcus depths, The same impression materials were used to produce 3 groups of die stone casts form void entrapment die had been exposed to milk. Voids in the impression body and stone casts ere counted under a stereoscopic microscope. From the experiment, the following results were obtained : 1. Sulcus reproduction ability of additional silicone impression material were diminished in order of Express, Examix, Perfect, Contrast. The significant difference was found between Perfect and other material. Heavy body/wash combination was superior In putty/wash method n Perfect impression material. 2. In direct observation, Contrast showed least void in impression body but correlations ere not found between sulcus reproduction and void production. 3. In void entrapment laboratory test, wettability were diminished in order of Examix, Contrast, Express, Perfect. Clinical impression recording seems not to correlate with laboratory test. 4. The wettability of die material to impression material was not different in Express, Examix, Contrast. But, in Perfect, Die-Keen had superior wettability to others.

• Journal of Families and Better Life
• /
• v.7 no.2
• /
• pp.95-107
• /
• 1989

In this study one aspect of consumer behavior in household equipment utilization was investigated the pattern, frequency, rate of washer use and their relation to the following factors a) Washer related factors : extent of the presence of desired characteristics, the evaluation of washer's intrinsic features and related household facilities. b) Psycho-social factors : attitude of energy conservation, preference & ability to wash by hand, standard of washing of the respondent homemaker. c) Socio-demographic factors : age, education level and employment status of homemaker, house-hold income, the presence of children under seven years, size of family, the presence of a paid help. The subjects of this study were 286 homemakers with washer in Seoul. Analysis methods were used to fuequency, one-way ANOVA, Gamma test, Pearson's Correlation Coefficient, t-test and multiple regression of SPSS program. The major findings are the following; 1) The pattern, frequency, rate of washe use appeared various in every household. 2) Extent of the presence of desired characteristics was very low and respondents evaluated their washer's intrinsic features moderate. 3) The pattern of washer use was affected by the evaluation of washer's intrinsic features, preference & ability to wash by hand, wife's employment and household income. The frequency of washer use was affected by family size and preference & ability to wash by hand. The rate of washer use was affected by extent of the presence of desired characteristics, the evaluation of washer's intrinsic features and preference & ability to wash by hand. Therefore, washing by hand is major substitute for washer. If more desired characteristics are added to washer, intrinsic features are improved, and maintenance costs are reduced or household income is raised, every houshold with washer will use washer more than washing by hand in washing ask so that it may gain more utility from washer.

• 보존과학연구
• /
• s.7
• /
• pp.292-303
• /
• 1986

The purpose of this paper is to select the suitable resin as changed in environmental and ingredients, in the conservation of metallic objects. Disposal way of metallic objects were used to various resin and grease which will must be well selected in the nature of relics. The contents of this report are summed up as follows ; The resins of Incralac, Ruscoat, wash primer, Amerlock-400 wrer coated on the slice of ironware (5% saltspray test on the view of nature & Adherence). After the coating, add increasing speed to a corrosion rate, and then the adherence of resins were tested. In this study corrosion test, 0.10-0.25% Amerlock-400 jis proved to be a rare one of corrosion rate and 1.0-2.5% Wash primer is found to be a plenty one of corrosion area.