• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.107-115
• /
• 2019

Effective construction safety management systems are desperately required for reducing damage caused by increasing safety accidents in construction sites. Safety accidents in construction sites can effectively protect if proactive measures are taken to prevent unauthorized worker access the expected hazardous area. In this study, we have developed a IoT(Internet of Things)-based dangerous zone alarming system for safety management in construction sites, which can be operated at low cost in large-scale sites as well as small and medium-sized construction sites. The development system utilizes a Zigbee-based beacon technology and cellular mobile communication technology to detect when authorized workers, unauthorized field workers or outsiders approaches hazardous zones. If somebody approaches the dangerous zones the system notifies immediately to the safety manager with a danger warning signal. It is expected that this system can effectively prevent safety accidents when applied to construction sites.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1428-1433
• /
• 2019

Interest in mountain accidents among the technical trends of disasters in Korea is increasing continuously. When accidents occur, the most common methods are location tracking and accident reporting using smartphones, and rescue activities are being carried out by using them. In this paper, we proposed an improvement of wireless safety system for mountain climbing safety using 447 FSK. Using the 447 MHz band transmitter / receiver, it accumulates position coordinates and data through position transmission and rescue signal transmission in case of anomalies. If a sender is out of the threshold of the set area range, a danger warning notification can be generated to quickly exit the danger zone. Provide services. In addition, it is considered that the health condition of the sender is continuously checked and the receiver is warned when the specified threshold is exceeded, so that it is possible to respond to the sender's disaster.

• Smart Media Journal
• /
• v.10 no.1
• /
• pp.70-78
• /
• 2021

The auditory information is used for urgent notification or warning in vehicle because it is not restricted by the direction compared to the visual. However, since the hearing impaired drivers cannot recognize sound signal, various methods of visualizing the auditory information have been attempted to replace it. When visualizing auditory information, only important information should be selected and provided to prevent cognitive overload concentrated on the vision. For this purpose, analysis of the type of auditory information in vehicle should be given in advance. In this study, the types of auditory information in vehicle were analyzed based on the user experience of hearing impaired drivers. Through the observation of the driving behavior of hearing impaired drivers, 33 auditory informations experienced in vehicle were collected. The collected auditory informations were classified into 12 groups through open card sorting by an expert group, and the types of auditory information in vehicle consisting of four levels were presented through a relative comparison of importance between groups. The presented type of auditory information in vehicle can be used as a guideline for selecting important information when the auditory information is converted into visual or tactile. This study is meaningful in that the user experience analysis was conducted by observing actual driving in daily life of hearing impaired drivers.

• Current Optics and Photonics
• /
• v.6 no.2
• /
• pp.171-182
• /
• 2022

A single-photon laser and mid-wave infrared (MWIR) common aperture optical system was designed and developed to detect and range a long-distance civil aviation aircraft. The secondary mirror of the Ritchey-Chretien (R-C) optical system was chosen as a dichroic lens to realize the design of a common aperture system for the laser and MWIR. Point spread function (PSF) ellipticity was introduced to evaluate the coupling efficiency of the laser receiving system. A small aperture stop and narrow filter were set in the secondary image plane and an afocal light path of the laser system, respectively, and the stray light suppression ability of the small aperture stop was verified by modeling and simulation. With high-precision manufacturing technology by single point diamond turning (SPDT) and a high-efficiency dichroic coating, the laser/MWIR common aperture optical system with a 𝜑300 mm aluminum alloy mirror obtained images of buildings at a distance of 5 km with great quality. A civil aviation aircraft detection experiment was conducted. The results show that the common aperture system could detect and track long-distance civil aviation aircraft effectively, and the coverage was more than 450 km (signal-to-noise ratio = 6.3). It satisfied the application requirements for earlier warning and ranging of long-range targets in the area of aviation, aerospace and ground detection systems.

• Journal of Life Science
• /
• v.30 no.1
• /
• pp.26-31
• /
• 2020

Heterosigma akashiwo is a globally distributed raphidophyte that forms blooms and causes significant losses to the aquaculture industry in many coastal countries. The development of a fast and sensitive detection method is therefore required to facilitate the appropriate warning of harmful algal blooms. In this study, a nuclease protection integrated with sandwich hybridization (NPA-SH) assay was developed to both qualitatively and quantitatively detect H. akashiwo. The NPA, capture and signal probes were designed by nucleotide sequencing of H. akashiwo. The applicability of NPA-SH was evaluated using cultured H. akashiwo cells and field samples collected at Goseong Bay, Korea. The results show that this method has good applicability and effectiveness in analyzing cultured cells and field samples. A linear regression equation for the quantitative analysis of H. akashiwo was obtained, and the lower detection limit of the assay was 1×10⁴ cells/ml. There was no statistically significant difference in the results of H. akashiwo quantitation using NPA-SH compared to those obtained using a microscope. These results indicate that NPA-SH can be a good alternative to the traditional microscopic method used to monitor H. akashiwo.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2011

When a hydrofoil ship plies at high speed, there exist possibilities of collision with ocean mammals dwelling near the surface. An active sonar located within the immersed hydrofoil structure that provides the lift for the vessel, can be used for early warning of their presence. The proper functioning of the active sonar system depends on its ability to reject noise and pick up the target signal. In this article, we measured the noise on a hydrofoil of an operating ship with two flush-mounted hydrophones. The measurements were conducted for the purpose of (1) identifying the effect of operating state of machinery likes engine, cooler and generator (2) observing the change of noise depending on the measuring position (3) observing the change of noise with increasing ship speed. To verify our experiment, experiments were performed three times and the measured results are compared with other investigations and they show similarity to each other. The results are analyzed with frequency domain in order to apply to operating active sonar detecting system and focus on high frequency band within sonar's operating frequency region. Through these experiments and analysis, it is expected that we can identify the generated noise around hydrofoil where active sonar is installed and these results lead us to design active sonar that could distinguish target signal from noise more effectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.18-25
• /
• 2016

As more people have cars, the threat of traffic accidents is posed on men and women of all ages. The main culprit of traffic accidents is driving while intoxicated or drowsy. The method to recognize and prevent the cause of traffic accidents is to use lane detection. In this study, a total of 4,000 frames (day image: 2,900 frames, night image: 1,100 frames) were used to test lane detection. According to the test, in the case of day image, when the threshold of Sobel edge detection technique was detected with second-order differential equation, there was the highest candidate lane detection rate which was 86.1%. In the threshold of Canny edge detection technique, the highest detection rate of 88.0% was found at Low=50, and High=300. In the case of night image, the threshold of Sobel edge detection technique, when horizontal calculation and vertical calculation had second-order differential equation, and when horizontal-vertical calculation had 1.5th-order differential equation, there was the highest detection rate which was 83.1%. In the threshold of Canny edge detection technique, the highest detection rate of 89.9% was found at Low=50, and High=300.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.96-105
• /
• 2011

Ubiquitos sensor network(USN) is a technology which is widely used in our life. This paper introduces an example of design and implementation for a system which is based on the USN technology and can provide an efficient management tool for a space that should be precisely controlled for a certain range of uniformity in temperature and humidity. This introduced system builds a wireless sensor network using a number of sensor modules that are equipped with temperature and humidity sensors, and collects temperature and humidity information in real-time while simultaneously providing a method for monitoring the status of temperature and humidity by the graphical user interface. Also, the system will give a warning signal if the monitored values are differ from the pre-specified values of temperature and humidity for each sensor module more than a certain amount of tolerance. This temperature and humidity logging and monitoring system can perform better management for the space easily and efficiently by automating the existing manual method for data collection and management. Furthermore, using the stored data, it can make possible to perform post-analysis on the problems caused by temperature and humidity and to obtain information for environmental enhancement for the space.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.94-104
• /
• 2000

The accuracy and reliability of the target tracking is very critical issue in the design of automotive collision warning radar A significant problem in multi-target tracking (MTT) is the target-to-measurement data association If an incorrect measurement is associated with a target, the target could diverge the track and be prematurely terminated or cause other targets to also diverge the track. Most methods for target-to-measurement data association tend to coalesce neighboring targets Therefore, many algorithms have been developed to solve this data association problem. In this paper, a new multi-target data association method based on order statistics is described The new approaches. called the order statistics probabilistic data association (OSPDA) and the order statistics joint probabilistic data association (OSJPDA), are formulated using the association probabilities of the probabilistic data association (PDA) and the joint probabilistic data association (JPDA) filters, respectively Using the decision logic. an optimal or near optimal target-to-measurement data association is made A computer simulation of the proposed method in a heavy cluttered condition is given, including a comparison With the nearest-neighbor CNN). the PDA, and the JPDA filters, Simulation results show that the performances of the OSPDA filter and the OSJPDA filter are superior to those of the PDA filter and the JPDA filter in terms of tracking accuracy about 18% and 19%, respectively In addition, the proposed method is implemented using a developed digital signal processing (DSP) board which can be interfaced with the engine control unit (ECU) of car engine and with the d?xer through the controller area network (CAN)

• Journal of the Korean Institute of Gas
• /
• v.14 no.5
• /
• pp.13-18
• /
• 2010

This paper presents the development of an integrated control and safety management system for 9% nickel steel LNG storage tank. The new system added the measuring equipment of pressure, displacement and force compared to the conventional measurement and control system. The measured data has simultaneously been processed by integrating and analyzing with new control equipments and safety management systems. The integrated control and safety management system, which may increase a safety and efficiency of a super-large full containment LNG storage tank, added additional pressure gauges and new displacement/force sensors at the outer side wall and a welding zone of a stiffener and top girder of an inner tank, and the inner side wall of a corner protection tank. The displacement and force sensors may provide failure clues of 9% nickel steel structures such as an inner tank and a corner protection, and a LNG leakage from the inner tank. The conventional leak sensor may not provide proper information on 9% nickel steel tank fracture even though LNG is leaked until the leak detector, which is placed at the insulation area between an inner tank and a corner protection tank, sends a warning signal. Thus, the new integrated control and safety management system is to collect and analyze the temperature, pressure, displacement, force, and LNG density, which are related to the tank system safety and leakage control from the inner tank. The digital data are also measured from control systems such as displacement and force of 9% nickel steel tank safety, LNG level and density, cool-down process, leakage, and pressure controls.