• 제목/요약/키워드: Wall reflection

검색결과 170건 처리시간 0.023초

철근의 깊이, 굵기 및 간격이 GPR 신호에 미치는 영향 조사 (Examination on the influence of Depth, Size and Interval of Rebar on the Signal of Ground Penetrating Radar)

  • 김영주;이승석;안봉영;김영길
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제4권2호
    • /
    • pp.167-174
    • /
    • 2000
  • Ground penetrating radar(GPR) was applied for measuring depths, sizes and intervals of rebars embedded in concrete. A concrete wall was constructed for this study and a sand pool and a concrete block were used for simulation. Result of this study shows that GPR can be used for measuring rebar depths and intervals, even though it is limitary, but that measuring sizes is almost impossible. Simulation with the sand pool was helpful for research on the versatile rebar arrays though signal was not clear as real concrete wall. A concrete block with many cylindrical holes for inserting different sized rebars could not be used for simulator due to many unknown reflective waves. Antenna orientation must be perpendicular to rebars for large reflection signal.

  • PDF

측면 반사를 고려한 다방향 불규칙파 생성 (Directional Irregular Wave Generation with Side Wall Reflection)

  • 양찬규;홍기용;홍석원;최학선
    • 한국해안해양공학회:학술대회논문집
    • /
    • 한국해안해양공학회 1997년도 정기학술강연회 발표논문 초록집 Annual Meeting of Korean Society of Coastal and Ocean Engineers
    • /
    • pp.53-57
    • /
    • 1997
  • 해양파는 해양구조물에 작용하는 주된 외력이고, 쇄파와 물질의 확산등 해양의 역학적 현상을 유발하며, 표사와 누유의 이동등 물질유동의 원인이 된다. 이러한 이유 때문에 정확한 해양파의 역학적 특성 및 재현기법에 대한 연구가 활발히 이루어져 왔다. Longet-Hggins(1975)와 Barber(1963)가 파의 방향분산성을 나타내는 방향스텍트럼 해석법을 제안한 이래 Mtsuyasu(1970)는 실해역 측정을 통해 Mitsuyasu형 방향분포함수 및 주파수 스펙트럼을 얻는 등 많은 심해역 파랑의 해석기법에 대한 연구가 꾸준히 진행되고 있다. (중략)

  • PDF

영상 정보를 이용한 로보트의 창법 연구 (Aisle following of a mobile robot using machine vision)

  • 장무경;한민홍
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
    • /
    • pp.591-595
    • /
    • 1990
  • This paper describes a method of aisle following of a mobile robot using machine vision. As a navigation guide, Black strip painted on the lower part of wall of aisle is used. The offset of the vehicle position from the center of aisle and the heading angle are determined from the binary image of guide strip captured by a CCD camera. To remove the effect of noise. i.e. break of guide strip for the door or reflection of light, pixel sampling method together with consistency check of the incline for the sampled pixels is used.

  • PDF

도로소음원에 대한 방음패널 형상별 반사소음 저감효과 (A Reduction Effect in Noise Reflection by Different Shapes of Soundproofing-panel)

  • 김일호;박태호;장서일;이혜인
    • 대한환경공학회지
    • /
    • 제37권2호
    • /
    • pp.120-125
    • /
    • 2015
  • 도시화의 가속화와 더불어 도심의 교통량의 증가로 도로소음피해를 최소화하기 위하여 방음벽의 설치 수요가 증가하고 있다. 설치되고 있는 여러 형태의 방음벽 중, 반사형 방음패널의 경우 불투명 방음패널과 달리 시야를 가리지 않으므로 방음시설을 요구하는 거주자들에게 인기를 얻고 있다. 하지만 반사형 방음패널의 경우, 반사음에 의한 2차 피해를 유발시켜 피해를 줄일 수 있는 방음벽 개발의 필요성이 대두되고 있다. 이에 본 연구에서는 반사형 방음패널의 전면형상 및 기하학적 형태를 변화시켜 반사음의 전달을 최소화 시킬 수 있는 형상을 연구하였다. 일반형 반사형 방음패널과 형상별 방음패널의 반사소음 저감 효과를 비교 한 결과, 곡선형 방음패널이 1.5 dB의 소음저감 효과가 있었다. 또한, 반사음의 증가 또는 감소는 형상별 설계인자에 따라 변화하는 것을 알 수 있었다. 이러한 결과는 방음벽 전면 현상에 따른 반사소음의 저감 기술의 가능성을 보여주는 결과라고 판단된다.

다중 벽면 구조의 실내 환경에서 2차원 광선추적법 구현 및 시뮬레이션 (Implementation and Simulation of 2D Ray-tracing Technique in Multiple-wall Indoor Environment)

  • 정승희;강철규;오창헌
    • 디지털콘텐츠학회 논문지
    • /
    • 제8권4호
    • /
    • pp.459-465
    • /
    • 2007
  • 본 논문에서는 다중 벽면 구조의 실내 환경에서 전파의 전달특성을 모델링하기 위해 ray-launching 기반의 광선추적법을 이용한 2차원 ray-tracing 시뮬레이터를 구현하였고, 이를 통해 ray의 전파 경로를 분석하고 평가하였다. 실험 결과, 구현된 광선추적법의 경로 패턴 및 시간지연 분포는 동일한 무선 환경에서 수행된 이전의 실험 결과와 비슷한 결과가 나타남을 확인하였으며, 송수신 거리 및 방사각에 따른 수신반경의 조정이 타당함을 확인하였다. 특히 비가시거리 송수신 환경에서 다중 벽면을 투과한 ray가 반사와 투과를 형성하여 수신기에 도달할 때까지의 ray의 impulse response는 기존 연구의 실험 결과와 대부분 일치하였으며, 송신기에서 발사되는 ray의 방사각을 $1^{\circ}$에서 $7^{\circ}$까지 달리하여 실험한 경우 도출된 channel profile이 서로 유사함을 확인하였다.

  • PDF

Mies van der Rohe 건축에서 몸체에 드러남에 관한 연구 (A Study on the Revealing of the Corporality in Mies's Works)

  • 이병욱;김용승
    • 한국실내디자인학회논문집
    • /
    • 제17권4호
    • /
    • pp.58-65
    • /
    • 2008
  • The purpose of this study is to explore the revealing corporality in Mies' architecture. The character of such technical materials refuses or weakens the physical reality of the wall by the thoughts concerning the unlimited space or continuous space in Modern architecture. The wall or facade revealed visually is substituted to substance without materiality or just disappeared. This causes a problem of perception of architectural form itself in Modern architecture. Leonardo suggested that all kinds of human perception happens within the visibility and touchability. Likewise, the corporality as a visual reality can be perceived as an important and fundamental value, which can measure the real being. In this respect, This study reviews his architectural meaning by tracing the visual reality in his works. Namely, the emphasis of architectural elements through the relief effect, the expression of massiveness through the reflection of the glass wall and the emphasis of the color through the contrast are interpreted in the intention of Mies to emphasize the visual corporality of the building. This study is to reevaluate the meaning of Mies's architecture through understanding of his thought about the architectural corporality, which has been forgotten by the transparency concept of Modern architecture.

한국 표준형 원전의 POSRV 하부 배관 유동해석 (Flow Analysis of POSRV Subsystem of Standard Korean Nuclear Reactor)

  • 권순범;김인구;안형준;이동은;백승철;이병은
    • 대한기계학회논문집B
    • /
    • 제27권10호
    • /
    • pp.1464-1471
    • /
    • 2003
  • In order to investigate the flows with shock wave in branch, 108$^{\circ}$ elbow and T-junction of the IRWST system of standard Korean nuclear reactor, detail time dependent behaviors of unsteady flow with shock wave, vortex and so on are obtained by numerical method using compressible three-dimensional Navier-Stokes equations. At first, the complex flow including the incident and reflected shock waves, vortex and expansion waves which are generated at the corner of T-junction is calculated by the commercial code of FLUENT6 and is compared with the experimental result to obtain the validation of numerical method. Then the flow fields in above mentioned units are analyzed by numerical method of [mite volume method. In numerical analysis, the distributions of flow properties with the moving of shock wave and the forces acting on the wall of each unit which can be used to calculate the size of supporting structure in future are calculated specially. It is found that the initial shock wave of normal type is re-established its type from an oblique one having the same strength of the initial shock wave at the 4 times hydraulic diameters of downstream from the branch point of each unit. Finally, it is turned out that the maximum force acting on the pipe wall becomes in order of the T-junction, 108$^{\circ}$ elbow and branch in magnitude, respectively.

Zn-Al 합금 선재를 이용한 금속용사 공법 적용 콘크리트의 전자파 차폐 성능 평가에 관한 실험적 연구 (An Experimental Study on the Evaluation of EMP Shielding Performance of Concrete Applied with ATMSM Using Zn-Al Alloy Wire)

  • 최현준;박진호;민태범;장현오;이한승
    • 한국건축시공학회지
    • /
    • 제19권3호
    • /
    • pp.209-217
    • /
    • 2019
  • EMP(Electromagnetic Pulse)는 통상적으로 고출력 전자기파 (High Power Electromagnetic: HPEM)를 의미한다. EMP를 차폐하기 위한 차폐 판의 경우, 현장 적용 시, 용접 및 볼트의 연결부(접합부)에서 시공자의 숙련도 및 불량시공, 차폐판의 변형 등으로 인한 전자파 차폐성능 저하의 가능성을 유발하고 있으며, 또한 벽체로부터 이격거리로 인한 비효율적인 공간 활용이 문제점으로 지적 되고 있다. 따라서, 본 연구는 콘크리트 벽체를 대상으로 반사손실에 대한 전자파 차폐성능을 확보하기 위한 일환으로서, 콘크리트에 금속용사 공법을 적용하여 최적의 전자파 차폐 조건을 도출하고자 한다. 실험변수로는 콘크리트 벽체 두께, Zn-Al 금속용사 적용 유무이다. 콘크리트 벽체의 경우, 일반적으로 적용되어지고 있는 벽체 두께인 100~300mm이며, 또한 전자파 차폐성능에 관한 Zn-Al 금속용사 공법의 실효성을 평가하기 위해 적용 유무로 구분하여 실험변수를 설정하였다. 실험 결과 두께가 증가할수록 흡수 손실의 증가로 인해 전자파 차폐성능이 증가하였다. 또한 Zn-Al 금속용사 적용 후 모든 시험체에서 평균 56.68 dB의 상당한 차폐성능 증가를 보였으며, 이는 금속용사 피막의 반사손실에 의하여 증가된 것으로 판단된다. 또한, 전도성 혼입재료와 금속 용사 피막을 동시에 적용할 경우 보다 우수한 차폐성능을 나타낼 것으로 판단된다.

광학 박막을 채용한 CMOS 이미지 센서 픽셀의 수광 효율 (Enhancement of Light Guiding Efficiency in CMOS Image Sensor by Introducing an Optical Thin Film)

  • 강명훈;고은미;이제원;조관식
    • 한국광학회지
    • /
    • 제20권1호
    • /
    • pp.57-60
    • /
    • 2009
  • CMOS 이미지 센서의 수광 효율을 높이기 위해서 픽셀의 광 통로 벽에 광학 박막의 도입을 제안하고자 한다. Essential Macleod를 이용하여 시뮬레이션해 본 결과, 전반사가 일어나는 범위가 현저히 증가하였다. 특히 공기 박막을 도입할 경우에, 그 효과가 가장 현저하여, 광 통로 벽에서의 전반사 임계각이 50도로까지 확대되었다.

전파무향실용 페라이트 전파흡수체의 설계 (A Design of Ferrite Electromagnetic Wave Absorber for Anechoic Chamber)

  • 이창우;김동일;김하근
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 1998년도 추계종합학술대회
    • /
    • pp.408-413
    • /
    • 1998
  • Electromagnetic wave absorbers for anechoic chamber are needed to broaden the useful frequency bandwidth, reduce the thickness, and decrease the weight. There are various absorbers proposed for the above conditions, but they could not decisively solve it the alone requirements. The Electromagnetic wave absorber made by a conventional ferrite tile has, for example, broadened the useful frequency bandwidth by the way of forming air layer(practically use urethane foam, etc.) on the ferrite tile. Therefore, an air layer is formed between a reflection plate and a sintered Ni-Zn ferrite tile of 7 mm in thickness, which has reflectivity less than -20 dB from 30 MHz to 600 MHz in bandwidth. Accordingly, in this paper, a broadened electromagnetic wave absorber will be designed, which has the reflection characteristics less than -20 dB from 30 MHz to 6000 MHz in the bandwidth. Then we will design a super broadband electromagnetic wave absorber by inserting square Ferrite Cylinders Type with the thickness less than 11 m and with the frequency band from 30 MHz to 6000 MHz under the above tolerance limits. The purpose of this research is on the development of a universal anechoic chamber for measuring radiated electromagnetic wave or immunity of electronic equipments, GTEM-cell, wall material for prevention TV ghost, etc.

  • PDF