• 한국지반환경공학회 논문집
• /
• 제16권7호
• /
• pp.23-33
• /
• 2015

본 연구는 차수가 요구되는 현장에 Sheet Pile을 적용하려고 하나 풍화암 등의 지반조건으로 인해 항타관입성의 제한이 있을 때 H-Pile로 보강된 Sheet Pile 흙막이 벽체를 적용하기 위한 수치해석 연구이다. Sheet Pile을 H-Pile로 보강한 S/H 복합파일의 거동을 규명하기 위하여 Sheet Pile의 규격 2종류와 H-Pile 3종류의 부재조건 변화, Sheet Pile과 H-Pile의 설치 근입심도 변화, H-Pile의 설치간격, 굴착조건 등을 변화시킨 101개의 경우에 대해 광범위한 수치해석을 실시하였다. 수치해석 결과, Sheet Pile SP-IIIA와 H-Pile H250, Sheet Pile SP-IV와 H-Pile H350의 조합에서 두 부재가 동시에 허용응력에 도달하거나 같은 응력비를 갖는 것으로 나타나 이 기성제품 조합이 효율적임을 알 수 있었으며, S/H 복합파일의 강성이 증가할수록 벽체의 수평변위가 감소하였고 S/H 복합파일 중 Sheet Pile의 근입심도가 안정성에 미치는 영향은 작은 것으로 나타나 Sheet Pile은 지지층 내 관입이 가능한 위치까지만 설치하여도 차수 및 벽체강성 증가의 목적을 달성할 수 있을 것으로 분석되었다.

• 한국지반환경공학회 논문집
• /
• 제13권8호
• /
• pp.35-43
• /
• 2012

널말뚝을 해안지역이나 도심지역에 건설하는 경우 주변에 위치한 횡방향 재하 말뚝의 영향권 내에 존재하게 되는 경우가 발생하게 되지만, 기존 설계방법에서는 이러한 영향에 대하여 고려하고 있지 않다. 본 연구를 통해 말뚝에 횡방향 하중이 재하되는 경우 근접한 널말뚝에 미치는 영향을 정량적으로 예측할 수 있는 방법을 제안하고자 한다. 상용프로그램인 ABAQUS를 이용하여 3차원 유한요소 모델을 만들었으며 지반 구성모델로는 Drucker-Prager 모델, 널말뚝과 말뚝은 선형탄성으로 거동하도록 모사하였다. 널말뚝의 휨강성, 말뚝과 널말뚝 간의 거리, 굴착깊이, 그리고 지반의 탄성계수 등 총 4가지 변수들을 사용하여 횡방향 재하 말뚝이 주변 널말뚝에 미치는 영향을 분석해 보았다. 수치해석 결과를 이용하여 널말뚝에 발생하는 최대 횡방향 변위 및 휨모멘트를 측정할 수 있는 간단한 식을 제시하였다.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.309-320
• /
• 2018

In this paper, a numerical study using finite element method with considering soil-structure interaction was conducted to investigate the stress and deformation behavior of a sheet pile wall structure. In numerical model, one of the nonlinear elastic material constitutive models, Duncan-Chang E-v model, is used for describing soil behavior. The hard contact constitutive model is used for simulating the behavior of interface between the sheet pile wall and soil. The construction process of excavation and backfill is simulated by the way of step loading. We also compare the present numerical method with the in-situ test results for verifying the numerical methods. The numerical analysis showed that the soil excavation in the lock chamber has a huge effect on the wall deflection and stress, pile deflection, and anchor force. With the increase of distance between anchored bars, the maximum wall deflection and anchor force increase, while the maximum wall stress decreases. At a low elevation of anchored bar, the maximum wall bending moment decreases, but the maximum wall deflection, pile deflection, and anchor force both increase. The construction procedure with first excavation and then backfill is quite favorable for decreasing pile deflection, wall deflection and stress, and anchor forces.

• Geomechanics and Engineering
• /
• 제33권5호
• /
• pp.507-518
• /
• 2023

The effects of various supporting arrangements have been investigated on an excavation support system using a numerical tool. The purpose of providing different supporting arrangements was to limit the pile wall deflection in the range of 0.5% to 1% of the excavation depth. Firstly, a deep excavation supported by sheet pile wall was modeled and the effects of sheet pile wall thickness, excavation depth and distance to adjacent footings from sheet pile wall face were explored on the soil deformation and wall deflection. Further analysis was performed considering six different arrangements of tieback anchors and struts in order to limit the wall deflections. Case-01 represents the basic excavation geometry supported by sheet pile wall only. In Case-02, sheet pile wall was supported by struts. Case-03 is a sheet pile wall supported by tieback anchors. Likewise, for the Cases 04, 05 and 06, different arrangements of struts and tieback anchors were used. Finally, the effects of different supporting arrangements on soil deformation, sheet pile wall deflection, bending moments and anchor forces have been presented.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.33-43
• /
• 2018

2열 겹침말뚝벽체는 30m 이상의 대심도에 적용 가능한 고강성의 주열말뚝으로서 동시에 연속성을 확보하여 차수벽이 되는 흙막이 벽체를 목표로 현재 개발 중에 있는 공법이다. 본 연구에서는 그러한 2열 겹침말뚝벽체의 최적 단면을 결정하는데 필요한 기초 데이터를 확보할 목적으로 여러 조건으로 가능한 시공 단면에 대하여 이론적 방법과 수치해석을 통해 각각의 휨 강성 특성을 조사하고, 이를 기존의 전형적인 CIP 및 SPW 단면의 휨 강성과 비교, 분석하였다. 그 결과, 말뚝 간 겹침길이가 커질수록 휨 강성이 감소하나 말뚝 주열수, 즉 1열과 2열 말뚝 간 휨 강성의 현저한 차이에 비해서는 그 차이가 미미한 것으로 나타났고 또한, 2열 겹침말뚝에서 보강재 종류와 말뚝개당 사용 개수가 휨 강성 크기에 미치는 영향은 겹침길이 차이에 따른 영향보다도 작은 것으로 나타났다. 따라서, 벽체의 구조적 성능 관점에서 본다면 2열 겹침말뚝벽체는 말뚝 간 겹침부 크기와 사용 보강재의 종류, 갯수에 크게 상관없이 대심도용 흙막이 벽체로 기존 공법인 CIP나 SPW 등에 비해 월등히 우수한 성능을 갖춘 것으로 파악되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.46-55
• /
• 2006

There are many kinds of braced cut wall methods as the sheet pile, SCW, CIP and slurry wall which is adoptable for a deep excavation construction in a coastal filled land. The braced cut wall which has a strong stiffness is very stable but it has the weak point that the construction cost is high. Thus when a braced cut wall is designed, the geotechnical engineers choose the braced cut wall which has more safe and economic in the consideration of surrounding buildings near the construction site. Especially, when the sheet pile method as a braced cut wall is cheesed, the layer order and consistence of a coastal deposit stratum are considered and the pile driving method is also considered. This paper introduces the case that the originally box-type sheet pile wall was changed to U-type and high strength material after the pilot test at the subway construction site in a coastal filled land. This paper also introduces the case that the sheet pile's driving method was changed to special method in the section of the temporary coffer dam which had made when the present coastal filled land was formed.

• 한국철도학회논문집
• /
• 제7권2호
• /
• pp.149-154
• /
• 2004

Pile Bridge Abutments constructed on a soft base are affected by a lateral flow. Laterl flow pressure acting on Pile is very difficult to calculate because of, interation of ground and Pile. So, it is different to estimate displacement of Pile Bridge Abutments. This paper studied about possibility of the displacement estimation of Pile Bridge Abutments by using the equivalent sheet pile wall theory that was Randolph proposed in 1981. Analysis program through using the SAGE CRISP that is FEM program. Analysis data used Centrifuge test results of Springman(1991), Bransby(1997) and Ellis(1997)'s paper. In conclusion, maxium displacement that is carried out by centrifuge test and numerical analysis has occured at the head of pile, as well as Maximum displacement of pile is closely similar. But the moment acting on pile of numerical analysis is under estimated compare to the centrifuge test. Through the comparative study, it is found that displacement estimation by equivalent sheet pile wall is in relatively good agreement with the results of centrifuge test.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.71-83
• /
• 2020

Cantilever sheet pile walls are subjected to surcharge loading located on the backfill soil and at different distances from the top of the wall. The response of cantilever sheet pile walls to surcharge loadings at varying distances under seismic conditions is scarce in literature. In the present study, the influence of uniform surcharge load on cantilever sheet pile wall at varying distances from the top of the wall under seismic conditions are analyzed using finite difference based computer program. The results of the numerical analysis are presented in non-dimensional form like variation of bending moment and horizontal earth pressure along the depth of the sheet pile walls. The numerical analysis has been conducted at different magnitudes of horizontal seismic acceleration coefficient and vertical seismic acceleration coefficients by varying the magnitude and position of uniform surcharge from the top of the wall for different embedded depths and types of soil. The parametric study is conducted with different embedded depth of sheet pile walls, magnitude of surcharge on the top of the wall and at a distance from the top of the wall for different angles of internal friction. It is observed that the maximum bending moment increases and more mobilization of earth pressure takes place with increase in horizontal seismic acceleration coefficients, magnitude of uniform surcharge, embedded depth and decrease in the distance of surcharge from the top of the wall in loose sand.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.385-400
• /
• 2016

Bearing capacity of open-ended piles depends largely on inner frictional resistance, which is influenced by the degree of soil plugging. While a fully-plugged open-ended pile produces a bearing capacity similar to a closed-ended pile, fully coring (or unplugged) pile produces a much smaller bearing capacity. In general, open-ended piles are driven under partially-plugged mode. The formation of soil plug may depend on many factors, including wall thickness at the pile tip (or inner pile diameter), sleeve height of the thickened wall at the pile tip and relative density. In this paper, we studied the effects of wall thickness at the pile base and sleeve height of the thickened wall at the pile tip on bearing capacity using laboratory model tests. The tests were conducted on a medium dense sandy ground. The model piles with different tip thicknesses and sleeve heights of thickened wall at the pile tip were tested. The results were also discussed using the incremental filling ratio and plug length ratio, which are generally used to describe the degree of soil plugging. The results showed that the bearing capacity increases with tip thickness. The bearing capacity of piles of smaller sleeve length (e.g., ${\leq}1D$; D is pile outer diameter) was found to be dependent on the sleeve length, while it is independent on the sleeve length of greater than a 1D length. We also found that the soil plug height is dependent on wall thickness at the pile base. The results on the incremental filling ratio revealed that the thinner walled piles produce higher degree of soil plugging at greater penetration depths. The results also revealed that the soil plug height is dependent on sleeve length of up to 2D length and independent beyond a 2D length. The piles of a smaller sleeve length (e.g., ${\leq}1D$) produce higher degree of soil plugging at shallow penetration depths while the piles of a larger sleeve length (e.g., ${\geq}2D$) produce higher degree of soil plugging at greater penetration depths.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권3호
• /
• pp.9-17
• /
• 2020

이 연구의 목적은 프리캐스트 콘크리트 벽체와 H-pile로 구성된 벽체구조의 횡하중저항 성능을 평가하는 것이다. 이러한 형태의 구조는 옹벽 및 방음벽 기초 구조물로 사용된다. 실제 크기의 목업시험체를 설계하였으며, 실험체를 제작하였다. 대상 구조체의 설계횡하중은 54.6kN이다. 실제 현장에서 6.5m의 파일과 유사한 변형 프로파일을 갖는 실험체의 파일의 길이를 이론적으로 결정하였으며, 1.5m로 제작하였다. 실험중 벽체의 횡방향 변위가 파일의 변형률을 모니터링 하였으며, 균열의 발생을 육안 조사하였다. 실험으로부터 평가된 하중 및 변형 능력을 설계능력과 비교하였다. 실험결과는 설계하중을 저항하는데 충분한 성능을 보유하고 있음을 나타냈다.