• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.65-65
• /
• 2004

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.291-312
• /
• 2016

Seismic performance evaluation of shear wall is essential as it is the major lateral load resisting member of a structure. The ultimate load and ultimate drift of the shear wall are the two most important parameters which need to be assessed experimentally and verified analytically. This paper comprises the results of monotonic tests, quasi-static cyclic tests and shake-table tests carried out on a midrise shear wall. The shear wall considered for the study is 1:5 scaled model of the shear wall of the internal structure of a reactor building. The analytical simulation of these tests is carried out using micro and macro modeling of the shear wall. This paper mainly consists of modification in the hysteretic macro model, developed for RC structural walls by Lestuzzi and Badoux in 2003. This modification is made by considering the stiffness degradation effect observed from the tests carried out and this modified model is then used for nonlinear dynamic analysis of the shear wall. The outcome of the paper gives the variation of the capacity, the failure patterns and the performance levels of the shear walls in all three types of tests. The change in the stiffness and the damping of the wall due to increased damage and cracking when subjected to seismic excitation is also highlighted in the paper.

• Architectural research
• /
• 제7권1호
• /
• pp.19-26
• /
• 2005

Unlike other countries, Korea uses various kinds of wall-paper as finishing material. Conventional wall-paper consists of paper and vinyl, and petrochemical ink is used for the decoration of the surface. Adhesive is used to paste the wall with the wall-paper, which emit substantial amounts of VOCs and formaldehyde. In this study, VOCs characteristics emitted from specimens made of concrete, mortar, gypsum board and wall-paper were investigated using small chamber method. Moreover, concentration and emission factor of BTEX(Benzene, Toluene, Ethylbenzene, m,p,o-Xylene) and TVOC were investigated, and concentration and emission factor decay were estimated. As a result of the prediction, both time-dependent concentration decay and cumulative concentration can be converted into the logarithmic scale. Furthermore, prediction equations were developed from the experimental results under accurately controlled experimental conditions. Therefore, there may be difference if the estimated equations are directly applied to real buildings. Further research should be done on the generalization of the developed prediction equations.

• 디자인학연구
• /
• 제19권2호
• /
• pp.207-216
• /
• 2006

벽지는 본래 종이가 지닌 성질상 실내장식에 있어서 수명이 가장 짧다는 특징이 있지만, 벽면의 시각적인 효과의 다양함으로 현대 벽장식 마감재중 가장 중요한 요소가 되었다 벽지는 종이의 특성상 역사적 유물 보존이 어렵고 그에 관한 기록이 미흡하며 건축물의 실내공간이 잘 유지되었거나, 광고로 사용되었던 다양한 상업용 샘플과 여러 책자에 의해서만 고증되고 있다. 종이벽지와 도배 자료들을 근거로 18세기의 영국을 중심으로 현대 벽지도배의 발전과 벽지산업의 이론적 체계 확립을 위해 과거의 전통적 벽지도배의 역사적 배경연구와 기술적, 상업적 배경의 근원을 이론적으로 고찰하여 전통적 벽지도배의 상업적 역사성을 재 인식하고자한다. 벽지도배의 이론적 연구를 통해 전통적 도배방법과 초배지의 전승, 반복이음 방식을 이용한 패턴의 양식화, 벽지도배의 분업화와 상업적 비용의 세분화, 과거 전통접착 방법의 전승, 띠벽지의 유래, 전통적 종이벽지의 실용성과 초기 도배기술의 다양한 기능성, 맞대이음 방식에서 중복이음 방식의 변화, 여성의 벽지선택을 통한 DIY제품의 개발 등을 이론적으로 고찰하였다. 벽지는 지금도 장식적, 기능적 벽 마감재 또는 벽 처리를 위한 가장 대중적인 재료로서 다른 재료들보다도 가장 선호하는 제품으로 남아 있다. 이러한 벽지의 도배 기술과 상업성을 역사적으로 고찰하여 전통 벽지도배의 이론적 체계 확립을 위한 중요한 자료이며 미래 벽지산업의 방법론적 접근을 위한 벽지역사의 근원이 될 수 있는 연구라고 사료된다.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.195-203
• /
• 2016

Shear wall structures have been widely used in high-rise buildings during the past decades, mainly due to their good overall performance, large lateral stiffness, and high load-carrying capacity. However, traditional reinforced concrete wall structures are prone to brittle failure under seismic actions. In order to improve the seismic behavior of traditional shear walls, this paper presents three different metal energy-dissipation shear wall systems, including coupled shear wall with energy-dissipating steel link beams, frame with buckling-restrained steel plate shear wall structure, and coupled shear wall with buckling-restrained steel plate shear wall. Constructional details, experimental studies, and calculation analyses are also introduced in this paper.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.697-704
• /
• 2002

This paper presents the results of instrumentation of a two-level of soil-reinforced segmental retaining wall. Instrumentation items include the lateral wall displacements and the geogrid strains at several locations. The instrumentation is still long carried in order to examine long-term behavior. The result indicate that the upper wall has a significant effect on the behavior of the lower wall doubling the wall moved. The wall also exhibits significant post-construction movements that had ceased several months after the wall completed. The implication of the findings from this study was discussed in great detail.

• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.209-216
• /
• 1994

The objective of the research reported in this paper is to design locomotion system of the motorized wheelchair, to develope the wall following algorithm. The indoor navigation of a motorized wheelchair can be based on the wall following techniques. In this paper, it is proposed to enhance stability and efficiency using the 3 ultrasonic sensors arranged at a same perpendicular pivot. Using this method, the angle between the motorized wheelchair and the wall is detected and the range of control commands has been increased. For the better stability, the calculated slope of a wall using LSLF algorithm was fed back to the control part. By adapting the suggested algorithm and method, the motorized wheelchair could follow a wall in 4 seconds, for a change of distance between the wheelchair and wall from 30 to 100cm.

• 디자인학연구
• /
• 제12권4호
• /
• pp.263-272
• /
• 1999

창조적 판매환경은 소비자에게 기업 이미지를 효과적으로 전달하여 소비욕구를 증진시키고 신뢰감을 형성하며, 이는 결과적으로 기업의 이윤확대로 이어지게 된다. 따라서 오늘날과 같이 기업간의 경쟁과잉으로 인해 그 차별성이 모호해진 경우 소비자의 개성충족을 위한 매장 디자인은 더욱 중요한 부분으로 대두되고 있다. 이에 본 연구에서는 소비자의 다양한 요구와 무분별해진 상업공간의 이미지 차별화를 위한 방안을 제시함에 있어서 벽을 중요한 요소로 인식하였다. 패션전문점에서의 벽을 기존의 구조적이고 단순판매를 위한 진열적 성격의 한계성에서 벗어나 공간에서 시각적 기능을 가진 요소로 해석하였다. 기존 구조벽이 갖는 물리적인 중요성보다 상징적, 시각적 측면에서의 기능성과 구성방법의 측면에서 접근하였다. 또한 구조 내력벽을 중심으로 시지각(視知覺) 빈도가 높은 내벽면과 사인성을 가진 파사드의 상호연관성을 분석하여 패션전문점에서의 벽면 구성에 의한 효과적인 이미지 표현방법을 제시하고자 하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제20권4호
• /
• pp.57-64
• /
• 1992

The unique cell wall micropores of pulp fiber can be utilized as loading site in variety of important practical application which could be the basis of new papermaking technologies. One of these includes the manufature of paper containing higher levels of in situ filler precipitated. Hardwood pulp fiber were first impregnated with the solution of sodium carbonate($Na_2CO_3$). The micropores in cell wall of pulp fibers were filled with the liquid salt solution. The second calcium nitrate($Ca(NO_3)_2$) solution formed an insoluble calcium carbonate($CaCO_3$) precipitate within the cell wall micropores by interacting with the first sodium carbonate solution. The effects of chemical concentration and dryness of pulp fibers on the retention of cell wall micropore loaded filler were investigated. The paper properties of cell wall micropore loaded pulp fibers were compared with those of conventionally loaded and lumen loaded pulp fibers. Also the presense of the fillers within the cell wall micropore was observed by SEM. Increasing the chemical concentration to generate the calcium carbonate increased the retention of filler in cell wall micropore loaded pulp fibers. The particle size distribution of precipitated calcium carbonate ranged from $0.1{\mu}m$ to $80{\mu}m$. But, the average particle size of cell wall micropore loaded calcium carbonate was $4{\mu}m$. The paper made from never dried pulp fibers, the cell wall micropores which were filled with calcium carbonate, had better mechanical and optical properties than those of conventionally loaded or lumen loaded pulp fibers.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.39-45
• /
• 1999

Refining in papermaking plays an important role in changing fiber properties as well as paper properties. The major effects of refining on pulp fibers are internal and external fibrillation, fiber shortening, and fines formation. Many workers showed that internal fibrillation of the primary refining effects was most influential in improving paper properties. In particular, refining produces separation of fiber walls into several lamellae, thus causing fiber wall swelling with water penetration. This leads to the increase of fiber flexibility and of fiber-to-fiber contact during drying. If the fibers are very flexible, they will be drawn into close contact with each other by the force of surface tension as the water is removed during the drainage process and drying stages. In order to study the effect of fiber wall delamination on paper properties, cross-sectional image of fibers in a natural condition had to be generated without distortion. Finally, it was well recognized that confocal laser scanning microscope (CLSM) could be one of the most efficient tool for creating and quantifying fiber wall delamination in combination with image analysis technique. In this study, the CLSM could be used not only to observe morphological features of transverse views of swollen fibers refined under low and high intensity, but also to investigate the sequence of fiber wall delamination and fiber wall breakage. From the CLSM images, increasing the specific energy or refining decreased the degree of fiber collapse, fiber cross-sectional area, fiber wall thickness and lumen area. High intensity refining produced more external fibrillation.