• 한국안전학회지
• /
• 제19권4호
• /
• pp.161-165
• /
• 2004

철근콘크리트조 공사의 안전성과 효율성은 동바리-슬래브거푸집의 최적의 운영에 달려있다. 철근콘크리트공사에서의 사고는 주로 가설공사에 과도한 하중이 작용하였거나 동바리를 조기에 철거하기 때문에 발생한다. 콘크리트의 조기압축강도발현이 공사중구조체의 안전에 중요하다. 슬래브-동바리의 상호작용에 관한 연구는 주로 무량슬래브 구조에 대하여 이루어 졌다. 본 연구에서는 전단벽식 철근콘크리트조 아파트에서 슬래브와 동바리에서의 하중분포를 유한요소법을 이용하여 조사하였다.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.83-89
• /
• 2014

The residents' demand for the comfortable life is promoting development of wall and window which has high sound insulation performance. To develop wall system, various aspects should be considered on the environment, material, construction and structure. Especially focusing on the acoustical view, the economical solution is one of the most critical point. Recently the interest on the partition wall is being increased, because it is useful for the Rahmen type apartment which is considered as an alternative to reduce floor impact sound. This study examines simplified measurement method of airborne sound insulation applied small size specimen, in order to save money to be used for the standard specimen then to promote the development process. The results showed that the simplified method could be effective for the wall system the sound insulation performance upto Rw 50 dB, and for the judgement of rank order of sound insulation performance of the similar wall type while developing.

• 한국공간구조학회논문집
• /
• 제6권3호
• /
• pp.43-50
• /
• 2006

This paper is concerned with the natural periods of ambient vibration and eigenvalue analysis. Ambient vibration tests were conducted to four bearing-wall reinforced concrete buildings ranging from twelve to nineteen stories. The performance of modeling in eigenvalue analysis was investigated using consideration of rigidity out of the plane in the slab and the non-structural bearing wall. Measured natural period was also compared with the value by the KBC2005. Natural period of the short direction in eigenvalue analysis is well fitted with the measured one. In the other hand, Natural period of the long direction in eigenvalue analysis is slightly more overestimated than the measured one. Natural period of the long direction in eigenvalue analysis was found to be enhanced by considering the effect of the stiffness out of the plane of the slab and non-structural wall in the structural modeling.

• 한국실내디자인학회논문집
• /
• 제13권5호
• /
• pp.198-205
• /
• 2004

The remodeling of apartment that improves the improves the life level is going to be in the market because of lots of old apartment buildings. Until now, the research of remodeling is mainly restricted to the laws and financial funding, however, the needs in the trend of remodeling. This research, first, through the examples of remodeling in the country, this study draws remodeling factors that can be applied. Secondly, this study targets the study of remodeling to apartments and analyzes the type of housings made by the Korea National Housing Corporation. Thirdly the study analyzes the features that appear in housing units and draws out factors of remodeling This research's result is arranged as follows. \circled1Need Remodeling thorough study of space expanded, grant between artificer and active performance improvement direction such as building equipment expansion along with Remodeling concept of unit repair. \circled2When apartments are newly built, systematic construction is necessary that considers future efficiency improvement from the design stage. \circled3This study, which applied the characteristic factors appearing after the 1990s to remodeling factors, show that they can be applied when remodeling the worn out wall-slab type apartments.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.109-115
• /
• 2015

Purpose: The importance of building airtightness is increased as the demand and expectation of building energy efficiency is growing. Previous research only focused on airtightness of building openings only to improve building airtightness. However, the analysis of difference of airtightness performance according to the characteristic of building structure has not been performed. Therefore, this study analyzed the difference of airtightness performance according to building structural characteristics in a number of ways. Method: Airtightness that are classified as rigid-frame type or wall type are measured and analyzed the difference of airtightness performance between rigid frame type apartments and wall type apartments. This study calculated the heating energy demand and quantitatively analysis using ISO 13790. Futhermore, this study compared research trend of domestic airtightness performance with airtightness standards of the developed countries based on the field measurement. Result: Airtight performance of wall type is better than rigid frame type in terms of energy saving. The difference of heating energy demand between wall type and rigid frame type was $8.14kWh/m^2yr$.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.56-64
• /
• 2019

공동주택 하자는 추가적으로 투입되는 각종 자원의 낭비, 경제적 비용손실로 연결되며, 입주자들에게는 시간적, 물질적, 정신적 피해를 주고, 기업에게는 금전적인 손실뿐만 아니라 기업 신용도를 추락하는 문제를 발생시킨다. 이러한 관점에서 본 연구에서는 다수의 하자분쟁 사례를 활용하여 공동주택 공종/하자유형/부위에 대하여 하자 빈도 및 심각도를 고려한 중요도를 산출하여 공동주택 하자관리 효율성을 제고하고, 하자분쟁을 최소화하는데 기여하고자 한다. 이를 위하여 본 논문에서는 공동주택 하자분쟁사례 48건, 약 7,548개의 하자항목 자료를 토대로 분석을 실시하였다. 분석 결과를 정리하면, 하자가 주로 발생하는 공종은 RC, 마감, MEP 공종이며, 중요도가 높은 하자유형은 균열, 누수, 오시공, 미시공 등인 것으로 확인되었다. 또한 하자부위의 경우 상대적으로 현장 설치 중심의 가구, 설비기기보다 현장 시공 중심의 외벽, 내벽, 내부 천장 및 바닥이 하자 중요도가 높은 것으로 확인되었다. 이에 따라 기본적으로 생애주기 각 단계별 품질관리를 철저히 할 필요도 있지만, 내부공간을 구성하는 부위의 경우, Pre-fabrication에 대한 활용성을 높이는 것을 고려할 필요가 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.597-602
• /
• 2007

It is proposed to analyze the vibration of slab with MTMD and vibration-induced noise. Substructure synthesis is introduced to develope the interaction between the slab and MTMD which are defined in different space and acoustic power is obtained from the velocity field of slab. Numerical analysis is performed to show that the vibration and noise of slab can be reduced by MTMD. A living room of wall type apartment including the wall and MTMD is modeled and analyzed by FEM program Numerical analysis shows that the vibration and noise control effect is different depending on the location and mass ratio of MTMD. Futhermore, noise is more effectively reduced when the vibration of higher modes of slab are reduced rather than lower modes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.65-69
• /
• 2007

Recently, the method of the apartment building design is changing from wall type to moment structure. Because of this reason, dry wall systems are used plentifully. This study examines the sound insulation performance of the light weight concrete panel using bottom ash. There is the difference of airborne sound isolation between laboratory and field test. For the purpose of searching deviation, we use the prediction tool(Insul 6.0). First, we calculated the prediction data and measured the sound isolation in the wall at the lab. Then, we measured it in the field and compared them. At the base of these datum, we measured the difference.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.525-528
• /
• 1998

This paper reports on tests of reinforced concrete shear walls for wall-type apartment structure under axial loads and the cyclic reversal of lateral loads with different confinement of the boundary elements. Confinement of the extreme element by U-stirrups and tie hooks seems to be as effective as closed stirrups. The shear strength capacity seems not to be increased by the confinement but deformation capacity improved.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.232-236
• /
• 1993

The Tunnel Form(T/F) system instead of traditional euro form has been tried to reduce construction duration and to improve concrete quality in reinforced concrete wall type apartment construction. To find the relationship for concrete compressive strength between cylinder mold and slab, the different curing locations of concrete cylinder mold in the room have been investigated. The test results showed that the compressive strength of the cylinder concrete with middle-upper location in the room was most near concrete compression strength with respect to slab concrete strength.