• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.75-82
• /
• 2020

There have been often cases of collapse for geogrid reinforced soil (GRS) retaining wall. Hence, social interest in the reinforcement and restoration of the collapsed GRS wall is increasing day by day. However, there are only few researches. For this reason, a series of numerical analyses using the Plaxis 2D program was conducted in this study to analyze the suitable reinforcement methods that can be applied on the existing damaged GRS wall caused by overturning of the modular blocks facing and the surface settlement at the backfill as the results from the design failure. The restoration plan used in this study is composed of two cases: (Case 1) soil nailing reinforcement and reinforced concrete (RC) wall facing construction on the existing damaged GRS wall; and (Case 2) removal of the entire damaged GRS wall and then reconstruction. The results on the internal stability of the GRS wall show that Case 1 obtained a greater safety factor than Case 2 for tensile force while Case 2 had a greater safety factor than Case 1 for pullout failures. Case 1 was found to be more stable than Case 2 in terms of the global slope safety by shear strength reduction method and the external deformation behavior by numerical analysis. In this study, the existing damaged GRS wall which was reinforced using Case 1 method shows more stable external behavior.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.547-552
• /
• 2009

When fiber reinforced plastics (FRP) products are manufactured, dust and odor materials are inevitably generated in a workplace. To improve the bad condition of the workshop, we developed the Hybrid Bag Filter attached activated carbon fiber (ACF) and installed the system at two companies producing FRP goods. In order to raise the efficiency of dust collection, we set the ducts both on the ceiling and at the bottom of the wall and according to the circumstances of the workshop's space, moving dust collector also adopted as a different type of flexible duct. Pulse Jet Type Bag Filter is also equipped to operate the system more effectively, for the improved fine environment because of high dust removal efficiency. Finally, we investigated the removal tendency of the dust and odor when operating the System of Hybrid Bag Filter.

• Journal of Chest Surgery
• /
• v.9 no.1
• /
• pp.69-72
• /
• 1976

This is to report a case of bronchgenic cyst. While most of the bronchogenic cysts reported in the literature so far were located either in the lung parechym or in the mediastinum near the tracheal bifurcation or main bronchi. the cyst presenting in this study was originated in the wall of the esophagus and was reported to be very rare. The cystic tumor was found accidentally by X-ray fluoroscopic examination of the esophagus and stomach in the patient with gastric hemorrhage. X-ray study revealed that the cystic tumor was oval in shape and located in the left posterolateral wall of the esophagus in the thoracic lower third. Two surgical operations, gastrectomy for gastric hemorrhage and the resection of the cystic tumor, were carried out separately. Gastrectomy including the removal of prepyloric ulcer by the Billroth II type procedure was performed in regular fashion, and the cystic tumor was resected radically without any injury of the mucous membrane of the esophagus. The cyst removed appeared to be filled with mucinous material, and histological examination identified the tumor as a bronchogenic cyst with ciliated epithelial internal lining. Postperative course of the patient was uneventful.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.220-227
• /
• 2012

Objectives: The study was to compare the shaping ability of Reciproc (VDW) and WaveOne (Dentsply Maillefer) instruments compared with ProTaper, Profile and hand instrument during the preparation of simulated root canals. Materials and Methods: Five groups (n = 5) were established. Reciproc, WaveOne, ProTaper, Profile and K file (K-flexo file) were used to prepare the resin simulated canals. A series of preoperative and postoperative images were taken by a microscope and superimposed in 2 different layers. The amount of resin removed from both the inner and the outer sides of the canal was measured to the level of 10 mm from the apical tip, with a 1 mm increment. Results: The mean of resin removal from the inner canal wall was not different from the outer canal wall for Reciproc and WaveOne groups at apical third (1 - 3 mm level). There was no difference in the change of working length and maintenance of canal curvature. NiTi instruments are superior to stainless-steel K file in their shaping ability. Conclusions: Within the limitation of this present study, Reciproc and WaveOne instruments maintained the original canal curvature in curved canals better than ProTaper and Profile, which tend to transport towards the outer canal wall of the curve in the apical part of the canal.

• Korean Journal of Veterinary Research
• /
• v.47 no.2
• /
• pp.191-195
• /
• 2007

This study reveals the unusual case reported for the first time on the selective non digestion of yellow mealworm (Tenebrio molitor) larvae by arowana fish. In January 2005, an Asian arowana (Scleropages formosus) (red variety), from Daesang Tropical Fish Corporation, Seoul, Korea, mortality was observed due to unknown cause. No putative causal factors were suggested by bacteriological and parasitological examinations. Internal examination of the dissected stomach showed some undigested debris with mandible parts of mealworms attached to the mucosal lining of stomach wall. Feeding experiment of yellow mealworm (Tenebrio molitor) was conducted on the silver arowana (Osteoglossum bicirrhosum). Result showed that on the test group, fish released vomitous material containing undigested mandibles of mealworm was observed on the 24th day of the feeding experiment. Histopathological examination of the cross section of the stomach wall layers of the test groups, showed detached parts of the mucosal layer and gastric pits around the damaged area with intact mucularis tissues. While the control group fed with mealworm larvae without head part showed intact stomach wall layers consisting of gastric pit, mucosa and mucularis tissues. Fish on both treatments survived until the termination of experiment. The removal of mealworm larvae head before feeding probably help or aid in the fast digestion of these insect larvae.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.167-180
• /
• 1991

The purpose of theis study was to evaluate the effectiveness of ultrasonic instrumentation in removing debris and smear layer from the root canal walls. 54 extracted, permanent single rooted teeth were randomly divided into 6 groups of 9 teeth. After canal preparation, the teeth were longitudinally sectioned. The sepcimens were then naturally dried for 2 days, given a maximun thickness gold coating, and examined under the SEM (JSM-35C type, JAPAN). Photographs of all specimens were then taken of the middle and the apical third of the root canal wall. The results were as follows: 1. In all groups, debris and the smear layer were not completely removed from the canal wall 2. There were no significant differences between at the apical third and at the middle third in removing debris and the smear layer in all groups. 3. There were no significant difference between the step - back group and the ultrasound group in removing debris and smear layer. 4. In general, the step - back/ultrasonund groups showed greater canal debridement than the step - back group or ultrasound group. 5. The step - back/ultrasound group with a No. 25 file for 3 min. showed significantly greater canal debridement than the step-back group (p<0.05), or the other step - back/ultrasound groups(p<0.05).

• Journal of Trauma and Injury
• /
• v.20 no.1
• /
• pp.47-51
• /
• 2007

Penetrating chest trauma caused by the components of one's own car is rare in motor vehicle accidents. We experienced two cases of penetrating chest injury caused by the sideview mirror of the patient's vehicle. One was a 25-year-old man. The sideview mirror penetrated the left chest, went through the diaphragm, and ruptured the spleen. He was in shock upon arrival at the emergency room. An emergency thoracotomy and laparotomy were done. The ruptured spleen was resected, the lung and the diaphragm were debrided and repaired, and the chest wall was reconstructed. The other patient was a 57-year-old male, who was transported to our emergency room with the sideview mirror of his truck stuck into his right chest wall as the result of an accident. He also had a right Bennet's fracture and an open fracture of the right tibia. Air had been sucked into the right pleural cavity through the wound. Multiple rib fractures and lung lacerations had also occurred. Removal of the sideview mirror, repair of the lacerated lung, and reconstruction of chest wall were done immediately. Both patients recovered without complication and were discharged.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.414-414
• /
• 2010

KSTAR vacuum vessel has been boronized by carborane ($C_2B_{10}H_{12}$) to reduce various kinds of impurities including carbon and oxygen from the wall, since carborane is solid, non-toxic, non-explosive and is easily evaporated, while diborane ($B_2D_6$) is toxic and explosive. To find the best wall condition for the removal of contaminants before application to KSTAR, various amounts (0.3g, 0.5g, 1g) of carborane are tested in a test chamber, where filament discharge was generated in the mixture of helium and carborane with the same KSTAR target pressure (~ 5 mTorr) from base pressure (${\sim}10^-7\;Torr$). Discharge is performed by a pulse sequence mode with 3 second power on and 5 second power off. Deposited films of a-C/B:H are characterized by ellipsometery, AES and XPS, and are compared with those of KSTAR.

• Journal of Chest Surgery
• /
• v.55 no.2
• /
• pp.183-187
• /
• 2022

Flail chest is a critical medical condition in which multiple segmentally fractured adjacent ribs cause paradoxical movement of the thoracic cage in patients with severe blunt trauma injury. Surgical stabilization is considered essential in patients who require mechanical ventilation. However, there is no consensus on which surgical procedure to choose among the various available techniques or when to perform surgery. We report the case of a patient with traumatic anterior flail chest due to bilateral multiple fractures of the ribs requiring surgical stabilization in whom weaning from mechanical ventilation had failed. The Nuss procedure using double bars with the bridge technique was performed for chest wall stabilization. The patient was weaned from mechanical ventilation on postoperative day 44 and she underwent bar removal on postoperative day 71. After extensive rehabilitation for multiple trauma, she was discharged successfully. The patient currently shows no recurrence of chest wall depression in outpatient follow-up.

• Journal of Plant Biotechnology
• /
• v.48 no.4
• /
• pp.278-288
• /
• 2021

The development of bioenergy through biomass has gained importance due to the increasing rates of fossil fuel depletion. Biomass is important to increase the productivity of bioethanol, and production of biomass with high biomass productivity, low lignin content, and high cellulose content is also important in this regard. Inorganic salts are important in the cultivation of biomass crops for the production of biomass with desirable characteristics. In this study, the roles of various inorganic salts in biomass and bioethanol production were investigated using an in vitro tobacco culture system. The inorganic salts evaluated in this study showed dramatic effects on tobacco plant growth. For example, H₂PO₄ substantially improved plant growth and the root/shoot (R/S) ratio. The chemical compositions of tobacco plants grown in media after removal of various inorganic salts also showed significant differences; for example, lignin content was high after Mg²⁺ removal treatment and low after K⁺ treatment and H₂PO₄ removal treatment. On the other hand, NO₃^- and H₂PO₄ treatments yielded the highest cellulose content, while enzymatic hydrolysis yielded the highest glucose concentration ratio 24 h after NH₄⁺ removal treatment. The ethanol productivity after H₂PO₄ removal treatment was 3.95% (w/v) 24 h after fermentation and 3.75% (w/v) after 36 h. These results can be used as the basis for producing high-quality biomass for future bioethanol production.