• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.224-232
• /
• 1999

Latent heat storage system using micro-encapsuled phase change material is effective method for floor heating of house and building. The temperature profile in capsule block and flow rate of hot water are important parameters for the development of heat storage system. In the present study, a mathematical model based on 3-D, non-steady state, Navier-Stokes equations, scalar conservation equations and turbulence model ($\kappa$-$\varepsilon$), is used to predict the temperature profiles in capsule and the velocity vectors in hot water pipe. The multi-block grids and fine grids embedding are used to join the circle in hot water pipe and square in capsule block. The phase change process of the capsule is quite complex not only because the size of phase change material is very small, but also because phase change material is mixed with the cement to form thermal storage block. In calculation, it's assumed that the phenomena of phase change is limited only the thermal properties of phase change material and the change of boundary is not happened in capsule. The purpose of this study is to calculate the temperature profiles in capsule block and velocity vectors in hot water pipe using the numerical calculation. Two kinds of thermal boundary condition were considered, the first (case 1) is the adiabatic condition for the both outside surfaces of the wall, the second (case 2) is the case in which one surface is natural convection with atmosphere and another surface is adaibatic. Calculation results are shown that the temperature profile in capsule block for case 1 is higher than that for case 2 due to less heat loss in adaibatic surface. Specially, in the domain of near Y=0, the difference of temperature is greater in case 1 than in case 2. The detailed experimental data of capsule block on the temperature profile and the thermal properties such as specific heat and coefficient of heat transfer with the various temperature are required to predict more exact phenomena of heat transfer.

• Korean Journal of Animal Reproduction
• /
• v.18 no.2
• /
• pp.141-150
• /
• 1994

Morphological features of the interaction between the hatching blastocyst and implantation in pig were studied by electron microscopy. The observations extended from late blastocyst stage to the completion of trophoblastic erosion of the epithelium and early decidual transformation of the epithelium and early decidual transformation of the stromal cells. Between day 7 and 17 of pregnancy, blastocysts from 0.3 to 12 mm in diameter were flushed from the uterine horns of Dutch Landrace pigs. On the 7th of development in the pig blastocyst, the blastocyst shedded of the zona pellucida established the tips of microvilli and with bleb-like cytoplasmic protrusions of the epithelial cells. From day 11 on in pig embryo, the bilayered trophoblast undergoes a dramatic phase of elongation so that the initially spherical expanded blastocyst becomes tubular. In pig, close apposition to the uterine wall beg-ins at about 12 $^1$/$_2$ days and then attachment occurred during the afternoon of the 16th or 18th day post coitum. At this stage, embryonic loss compared with corpus luteum number is up to 40% of ovulated oocytes. Therefore, the implantation failture of these embryos may be mainly caused by morphological abnormality and failture of zona shedding.

• Korean Journal of Food Science and Technology
• /
• v.47 no.5
• /
• pp.667-672
• /
• 2015

Cynanchum wilfordii and Phlomis umbrosa Turcz. are known to contain isoflavone, a representative phytoestrogen. This study was performed to determine whether the extract mixture of C. wilfordii and P. umbrosa Turcz. would induce an estrogenic effect in ovariectomized rats. The extracts were administered to the ovariectomized rats at 30, 60, 120 mg/kg per day for 4 weeks, respectively. They showed no estrogenic effect, which was indicated by the decrease in uterus wall thickness as well as the increase in body weight and the level of cholesterol and triglyceride. The extracts also had no effect on the concentrations of estrogen and growth hormone in the serum. However, the increase in alkaline phosphatase activity, which leads to protection against the bone loss caused by ovariectomy, was noted on administration of the extract. Therefore, it seemed that the extracts of C. wilfordii and P. umbrosa Turcz. had no estrogenic effect in rats.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.4
• /
• pp.515-525
• /
• 2020

Interferon (IFN)-λ plays an essential role in mucosal cells which exhibit strong antiviral activity. Lactobacillus plantarum (L. plantarum) has substantial application potential in the food and medical industries because of its probiotic properties. Alphacoronaviruses, especially porcine epidemic diarrhea virus (PEDV) and transmissible gastroenteritis virus (TGEV), cause high morbidity and mortality in piglets resulting in economic loss. Co-infection by these two viruses is becoming increasingly frequent. Therefore, it is particularly important to develop a new drug to prevent diarrhea infected with mixed viruses in piglets. In this study, we first constructed an anchored expression vector with CWA (C-terminal cell wall anchor) on L. plantarum. Second, we constructed two recombinant L. plantarum strains that anchored IFN-λ3 via pgsA (N-terminal transmembrane anchor) and CWA. Third, we demonstrated that both recombinant strains possess strong antiviral effects against coronavirus infection in the intestinal porcine epithelial cell line J2 (IPEC-J2). However, recombinant L. plantarum with the CWA anchor exhibited a more powerful antiviral effect than recombinant L. plantarum with pgsA. Consistent with this finding, Lb.plantarum-pSIP-409-IFN-λ3-CWA enhanced the expression levels of IFN-stimulated genes (ISGs) (ISG15, OASL, and Mx1) in IPEC-J2 cells more than did recombinant Lb.plantarum-pSIP-409-pgsA'-IFN-λ3. Our study verifies that recombinant L. plantarum inhibits PEDV and TGEV infection in IPEC-J2 cells, which may offer great potential for use as a novel oral antiviral agent in therapeutic applications for combating porcine epidemic diarrhea and transmissible gastroenteritis. This study is the first to show that recombinant L. plantarum suppresses PEDV and TGEV infection of IPEC-J2 cells.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.175-186
• /
• 2002

The purpose of this study is directly measure and evaluate about absorbed dose change according to nominal energy and electron cone or medical accelerator on isodose curve, percentage depth dose, contaminated X-ray, inhomogeneous tissue, oblique surface and irradiation on intracavitary that electron beam with high energy distributed in tissue, and it settled standard data of hish energy electron beam treatment, and offer to exactly data for new dote distribution modeling study based on experimental resuls and theory. Electron beam with hish energy of $6{\sim}20$ MeV is used that generated from medical linear accelerator (Clinac 2100C/D, Varian) for the experiment, andwater phantom and Farmer chamber md Markus chamber und for absorbe d dose measurement of electron beam, and standard absorbed dose is calculated by standard measurements of International Atomic Energy Agency(IAEA) TRS 277. Dose analyzer (700i dose distribution analyzer, Wellhofer), film (X-OmatV, Kodak), external cone, intracavitary cone, cork, animal compact bone and air were used for don distribution measurement. As the results of absorbed dose ratio increased while irradiation field was increased, it appeared maximum at some irradiation field size and decreased though irradiation field size was more increased, and it decreased greatly while energy of electron beam was increased, and scattered dose on wall of electron cone was the cause. In percentage depth dose curve of electron beam, Effective depth dose(R80) for nominal energy of 6, 9, 12, 16 and 20 MeV are 1.85, 2.93, 4.07, 5.37 and 6.53 cm respectively, which seems to be one third of electron beam energy (MeV). Contaminated X-ray was generated from interaction between electron beam with high energy and material, and it was about $0.3{\sim}2.3\%$ of maximum dose and increased with increasing energy. Change of depth dose ratio of electron beam was compared with theory by Monte Carlo simulation, and calculation and measured value by Pencil beam model reciprocally, and percentage depth dose and measured value by Pencil beam were agreed almost, however, there were a little lack on build up area and error increased in pendulum and multi treatment since there was no contaminated X-ray part. Percentage depth dose calculated by Monte Carlo simulation appeared to be less from all part except maximum dose area from the curve. The change of percentage depth dose by inhomogeneous tissue, maximum range after penetration the 1 cm bone was moved 1 cm toward to surface then polystyrene phantom. In case of 1 cm and 2 cm cork, it was moved 0.5 cm and 1 cm toward to depth, respectively. In case of air, practical range was extended toward depth without energy loss. Irradiation on intracavitary is using straight and beveled type cones of 2.5, 3.0, 3.5 $cm{\phi}$, and maximum and effective $80\%$ dose depth increases while electron beam energy and size of electron cone increase. In case of contaminated X-ray, as the energy increase, straight type cones were more highly appeared then beveled type. The output factor of intracavitary small field electron cone was $15{\sim}86\%$ of standard external electron cone($15{\times}15cm^2$) and straight type was slightly higher then beveled type.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• Advances in nano research
• /
• v.8 no.4
• /
• pp.323-333
• /
• 2020

In recent years, there has been an upsurge for the usage of buckling restrained braces (BRB) rather than ordinary braces, as they have evidently performed better. If the overall brace buckling is ignored, BRBs are proven to have higher energy absorption capacity and flexibility. This article aims to deliberate an economically efficient yet adequate type of all-steel BRB, comprised of the main components as in traditional ones, such as : (1) a steel core that holds all axial forces and (2) a steel restrainer tube that hinders buckling to occurr in the core; there is a more practical detailing in the BRB system due to the elimination of a filling mortar. An investigation has been conducted for the proposed rectangular-tube core BRB and it is hysteric behavioral results have been compared to previous researches conducted on a structure containing a similar plate core profile that has the same cross-sectional area in its core. A loss of strength is known to occur in the BRB when the limiting condition of local buckling is not satisfied, thus causing instability. This typically occurs when the thickness of the restrainer tube's wall is smaller than the cross-sectional area of the core plate or its width. In this study, a parametric investigation for BRBs with different formations has been performed to verify the effect of the design parameters such as different core section profiles, restraining member width to thickness ratio and relative cross-sectional area of the core to restrainer, on buckling load evaluation. The proposed BRB investigation results have also been presented and compared to past BRB researches with a plate profile as the core section, and the advantages and disadvantages of this configuration have been discussed, and it is concluded that BRBs with tubular core section exhibit a better seismic performance than the ones with a plate core profile.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.10 no.1
• /
• pp.1377-1387
• /
• 1968

In order to measure runoff and soil losses produced in a small test plot during rainfall, it is usually insufficient to use a tank only, necessitating the combined use of a main tank and a subsidiary tank. Accordingly. exact measurement largely depends on how to connect those two measuring tanks. The main purpose of this thesis is to improve the connecting parts of two measuring tanks so as to assure exact measurement of runoff and soil losses. In this experiment, two types of main tank, i. e. A-type and B-type, were used. A-type is a square tank having a flume at its end. At the flume, ten apertures are provided by using metal columns so as to be able to catch one tenth of total muddy flow discharging at the end of the flume, One tenth of total flow is led to the subsidiary tank through a slot sampler fixed to an aperture. B-type differes in that its flume does not have apertures and slot sampler is fixed directly to the end of the flume, other features being the same as those of A-type. Discharge volumes were measured by using weighing tanks and compared. The effect of baffle screen provided in the flume was also observed in connection with exact measurements. In order to keep main tank and its flume in a horizontal position, bolts and nuts mechanism was used. Vertical and horizontal screens were provided in the main to prevent coarse sands coming into the flume. The conclusion derived through this experiment is as follows: (1) The discharge through slot sampler at each aperture is almost the same for A-type. However, it is slightly more than one tenth of total discharge volume. (2) In case that baffle screen is provided in the flume of A-type tank, the discharge volume of slot sampler is less than that of the same type without screen. (3) For B-type tank, slot sampler discharge increases as slot sampler nears toward the center of flume. (4) When baffle screen is provided in the flume of B-type, slot sampler discharge is less than that of the same type without screen, and this phenomenon is more apparent as compared with A-type. (5) In case that the slot width of slot sampler for B-type is one inch, slot sampler discharge exceeds one tenth of total discharge volume. (6) When the slot width for B-type is 15/16 inch and slot sampler is fixed 3/8 inch apart from either flume wall, slot sampler discharge is approximately equal to one tenth of total discharge volume.

• Journal of Forest and Environmental Science
• /
• v.23 no.1
• /
• pp.57-63
• /
• 2007

Anatomical characteristics of black and white charcoal of Quercus variabilis and Quercus mongolica manufactured by a Korean traditional kiln were investigated by scanning electron microscopy. In both charcoal, the earlywood vessels shrank in tangential direction, whereas the other cells didn't change. However, in the case of latewood vessels, black charcoal did not show tangential direction shrinkage, but white charcoal did. The wood fiber were changed severly in shape due to the excessive shrinkage. Tyloses in early wood vessel were still shown unchanged shape in both charcoals. Cell wall of ray parenchyma was observed and their shapes were severly distorted. Voids between ray parenchyma were observed in white charcoal, which maybe due to high temperature in white charcoal. Moreover, lumen diameters in the uniseriate ray and multiseriate ray were decreased at the high charring temperature. These results showed that the low charcoal yield of the white charcoal compared to the black charcoal was caused by decrease of cell dimensions as well as loss of wood components associated with the carbonization temperature.

• Journal of fish pathology
• /
• v.30 no.2
• /
• pp.115-134
• /
• 2017

A total number of 668 apparently healthy fish were obtained from farm to study the effect of two heavy metals (Copper and Mercury) on histopathology of liver, kidney, spleen, gills and muscles also residues in muscles. The $LC_{50}$/96 hr. of Cu and Hg were estimated and fish exposed to 1/2 $LC_{50}$ for 7 days and for 1/10 $LC_{50}$ for 8 weeks from each product separately. Histopathological findings in acute and chronic mercuric chloride toxicity revealed degeneration and necrosis in the glomeruli, interstitium tissue and epithelium lining renal tubules. The tubular epithelium became necrotic at several places. Eosinophilic hyaline droplets is exist in the cytoplasm of the necrosed cells. Degenerative changes and hyperactivity in melanomachrophage center was seen in the spleen together with some necrotic areas. Necrosis and aggregation of melanomachrophage were seen in the hepatic cells, Hepatic cells showed vacuolar degeneration in the hepatic cells. Gills showed loss in the lamellae of the filaments associated with edema, inflammatory cells infiltration and haemorrhages in the arch. The sarcoplasm of the bundles of the skeletal muscle showed granular degeneration and focal inflammatory cells infiltration between the hyalinized bundles. Mercury residues obtained from these studies in the acute toxicity were 0.22 ppm/gm in the 2nd day, 0.411 ppm/gm in the $5^{th}$ day ended with 0.96 ppm/gm in the $7^{th}$ day. In chronic toxicity it was 1.1320, 1.7140, 2.3620 and 3.5640 ppm/gm respectively from the $2^{nd}$ to the $8^{th}$ week of exposure. In acute and chronic copper toxicity, there was degenerative changes in renal tubules. Melanophores aggregation in the wall of the blood vessels of the spleen and depletion of some of the melanophores in the melanomachrophage were seen together with necrosis in some areas. Congested Mvs (Micro vessels) and vacuolation of hepatocytes were observed. Some areas of hemorrhage and melanophores vacuolar degeneration in the liver were seen. There was mitosis in some areas with displesia of hepatopancreatic cells and eosinophilic granular cells aggregation. Zymogen granules disappeared and there were dyplastic hepatocytes. Congestion in the blood vessels of the gill filaments, associated with massive number of granular eosinophilic cells infiltration were seen in the base of the filaments. There were sever vacuolization and hyalinization in the skeletal muscle bundles. Detection of residues of copper sulfate revealed increase of the amount of copper measured in ppm/gm comparing to the normal control starting from 0.60 ppm/g in the $2^{nd}$ day, 0.67 ppm/g in the $5^{th}$ day and 0.67 ppm/g in the $7^{th}$ day. Result obtained in chronic copper sulfate toxicity revealed gradual increase of the amount of copper which ranged from 0.18 ppm/g at the $2^{nd}$ week to 0.21 ppm/g in the $8^{th}$ week of exposure.