• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.421-422
• /
• 2017

The kicker modulator was upgraded and installed in 1995. The PLS-II injection kicker modulator is configured with series resonant circuit. A total of four kicker magnets are used to distribute the normal storage ring beam orbit toward the septum magnet wall. Only one kicker modulator is used to drive the four kicker magnets. It is not adjust the current magnitude and timing of magnets. During the kicking, the beam has oscillation of 2 mm horizontal direction and $200{\mu}m$ vertical direction in present injector system. Our goals is to decrease the oscillation less than $300{\mu}m$. To give balanced current for all four magnets and to have precise timing between magnet current, we have plan to divide kicker power supply into four individual power supply. In this paper, the design of new individual kicker power supply and Fabrication of the new injector system is presented.

• 대한수의학회지
• /
• 제23권1호
• /
• pp.119-122
• /
• 1983

Paravertebral anesthesia for operation of abdominal wall in Korean cattle were effectively accomplished with the following technique. Any problems in surgical procedure were not observed under the block of ventral branches of the last thoracic nerve and the first and second lumbar nerves with the administration of preanesthetic. The site of injection for blocking of ventral branches of the thirteenth thoracic nerve were approximately 5cm lateral to the midline from the posterior edge of spinous process of the 13th thoracic vertebra and about 10ml of local anesthetic was injected immediately anterior to the transverse process of the first lumbar vertebra through thin site. The block of ventral branches of the first and second lumbar nerves were obtained by injecting 10ml of local anesthetic immediately below the posterior edge of transverse process of the 2nd and 4th lumbar vertebra, respectively.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.468-473
• /
• 2018

We investigate the temperature dependence of efficiency droop in InGaN/GaN multiple-quantum-well (MQW) blue light-emitting diodes (LEDs) in the temperature range from 20 to $80^{\circ}C$. When the external quantum efficiency (EQE) and the wall-plug efficiency (WPE) of the LED sample were measured as injection current and temperature varied, the droop of EQE and WPE was found to be reduced with increasing temperature. As the temperature increased from 20 to $80^{\circ}C$, the droop ratio of EQE was decreased from 16% to 14%. This reduction in efficiency droop with temperature can be interpreted by a temperature-dependent carrier distribution in the MQWs. When the carrier distribution and radiative recombination rate in MQWs were simulated and compared for different temperatures, the carrier distribution was found to become increasingly homogeneous as the temperature increased, which is believed to partly contribute to the reduction in efficiency droop with increasing temperature.

• 한국가시화정보학회지
• /
• 제22권2호
• /
• pp.82-89
• /
• 2024

In this study, experiments were conducted to visualize and analyze the dynamic characteristics of splash and residual liquid film formation during and after the injection of water droplets onto vertically situated solid substrates with varying surface wettability, elasticity, and microtexture. As wettability decreased (higher contact angle), more splash droplets formed, and the residual liquid film decreased. Low contact angles resulted in thin residual films and less splash. Surface elasticity absorbed the impact forces of droplets, thereby decreasing splash phenomena and significantly reducing the formation of residual liquid films due to surface vibration. Surfaces with microtextures demonstrated control over droplet splash direction, guiding the liquid along desired pathways. High-speed imaging provided detailed insights, showing that surface properties critically influence splash dynamics and residual liquid film formation.

• 대한핵의학회지
• /
• 제31권1호
• /
• pp.50-56
• /
• 1997

관상 동맥 질환에서 심근 혈류의 평가를 위하여 사용되는 심근 관류 SPECT는 여성에서의 유방이나 횡격막 감쇠 등 인공 산물에 의하여 위양성으로 나타날 수 있다. 이 연구에서는 게이트 SPECT를 이용하여 관류 SPECT에 나타나는 의심스러운 관류 감소 부위의 벽 운동을 평가하여 관류 감소 부위가 인공 산물인지 판정하였다. 판정 결과는 관상 동맥 조영술 결과와 비교하였다. 대상 환자 275명에서 관류 SPECT의 예민도와 특이도는 각각 87%와 55%였고 게이트 SPECT를 진단에 이용하였을 때 관류 SPECT에서 위양성을 보인 5례의 벽운동이 정상임이 확인되어 특이도가 66%로 향상되었다. 이상의 결과로 게이트 SPECT는 관상 동맥 질환의 특이도를 높이는 데 이용될 수 있을 것으로 생각한다.

• 한국식품과학회지
• /
• 제35권3호
• /
• pp.488-492
• /
• 2003

S. cereviaiae KCTC 7911에 돌연변이를 유도하고 selective pressure로서 세포벽 분해효소인 zymolsae와 mechanical stress인 glass bead를 차례로 처리하여 효모변이주를 S. cerevisiae IS2를 선발하였다. S. cerevisiae IS2는 세포벽 분해효소인 zymolase의 농도별 내성실험 결과 wild-type에 비해 훨씬 강한 내성을 보여 세포벽에 변화가 일어난 균주로 예상된다. 효모변이주와 wild-type으로부터 베타글루칸을 추출하여 면역활성에 미치는 영향을 조사하기 위해 생쥐의 복강에 주사하고 생성되는 면역세포의 수, NO 생성능, 및 면역세포의 대다수를 차지하는 대식세포의 탐식능을 측정하였다. 베타글루칸을 쥐의 복강에 주사하였을 때 베타글루칸의 종류에 상관없이 면역세포의 수, NO 생성능 및 대식세포의 활성도가 증가하는 결과를 얻을 수 있었다. 특히 변이주 베타글루칸을 주사하였을 경우 wild-type 베타글루칸에 비해 면역세포의 수는 1.40배, NO 생성능은 1.12배, 대식세포의 활성도와 탐식능은 각각 1.18배와 1.43배 높은 수치를 얻을 수 있었다. 이러한 결과들로 미루어 변이주 베타글루칸이 wild-type 베타글루칸보다 우수한 면역활성 촉진능력을 가지고 있음을 증명할 수 있었으며, 고부가가치 기능성 면역물질로서의 응용 가능성을 확인할 수 있었다.

• 한국수산과학회지
• /
• 제42권2호
• /
• pp.131-138
• /
• 2009

The radioprotect effects of fractinated fucoidan, derived from Undaria pinnatifida sporophylls, were examined in lung injured rats treated with partial body irradiation. The right lung of Sprague-Dawley rats, eight separately grouped by including radiation only control group (ROG) and fucoidan+radiation treated group (FRG), were treated with various fraction of Undaria-derived fucoidan every other day by intraperitoneal injection 6 days prior to irradiation and during monitoring at 24 hours, 48 hours, 2 weeks, 4 weeks and 12-weeks post-irradiation of 6 Mev/2 Gy. The rats were euthanized at completion of the treatment. Tissue samples from the injured lung, fixed in formaldehyde using lung perfusion prior to extraction, were H/E stained for histological analysis using optical microscopy. Interstitial congestion (IC), hemorrhage in alveolar sac (HM), number of macrophage (MP) and alveolar wall thickness (AWT) as a measure of early indication of fibrosis were measured. AWTs in 24 hrs post-irradiation rats increased in comparison with $2.49{\pm}0.06{\mu}m$ of control group by $3.67{\pm}0.09{\mu}m$, $3.21{\pm}0.08{\mu}m$ (p=0.013), $2.98{\pm}0.08{\mu}m$ (p=0.00) in ROG, F1-fucoidan+radiation, and F3-fucoidan+radiation group, respectively. AWT of the ROG was further increased by $4.30{\pm}0.13{\mu}m$ in the 12 weeks post-irradiation group, but AWT on average was $2.56{\pm}0.05{\mu}m$ in the FRG. MP in the 24 hrs post-irradiation group markedly increased in comparison with $2.6{\pm}0.34/0.14\;mm^2$ of the control group by $8.0{\pm}1.48/0.14\;mm^2$ in the ROG, but it was only $3.6{\pm}0.48/0.14\;mm^2$ in F3-FRG. MP in the 12 weeks post-irradiation group was $7.2{\pm}1.28/0.14\;mm^2$ in ROG, but it was $2.8{\pm}0.37/0.14\;mm^2$ or $2.4{\pm}0.4/0.14\;mm^2$ (p<0.05) in the FRG. In addition, increased IC and HM in ROG were relatively smaller in FRG of the 24 hr and 12 weeks post-irradiation rats. In conclusion, Undaria pinnatifida sporophylls-derived fucoidan fractions exhibited radioprotectant activity on injured rat lung subjected to X-ray irradiation. However, success was variable according to the fractions and also time of injection post injury.

• 유변학
• /
• 제11권1호
• /
• pp.57-65
• /
• 1999

분말사출재의 항복응력을 효과적이고 간단한 방법으로 측정하기 위해서 수차 장치를 사용한 항복응력 측정장치를 개발하였다. 수차 방식은 벽면 미끄러짐을 고려할 필요가 없는 장점이 있으나 전단률에 따른 점도 변화 측정에는 사용할 수 없는 단점도 있다. 수차 장치의 타당성 검토를 선형유체를 사용하여 검증하였으며, 수차 장치의 양단에서 나타나는 오차도 실험적으로 확인하였다. 분말 현탁액의 일반적인 특징이라고 여겨지는 항복 시 발생하는 순간 최대 토오크는 측정 장치의 제어기 특성에 따른 영향이 큰 것을 확인하고 안정 토오크 영역을 항복응력 계산의 기준으로 결정하였다. 측정되는 토오크에서 수차의 회전 저항에 따른 효과를 제거하기 위해 다양한 속도에서 측정된 토오크를 선형함수로 근사하여 회전 속도가 없을 때의 토오크를 얻었다. 측정 방법의 일반적인 검증을 위해 텅스텐 카바이드 분말과 왁스계 바인더를 이용한 분말사출재의 항복응력을 온도와 분말 충전률 변화에 따라서 측정하였다.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1185-1194
• /
• 2000

The characteristics of intake port flow and engine performance with swirl ratio variance in a turbocharged D.I. diesel engine were studied in this paper. The intake port flow is important factor which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. Through these experiments it can be expected to satisfy performance and emission by optimizing the main parameters; the swirl ratio of intake port, injection timing and compression ratio. The swirl ratio for ports was modified by hand-working and measured by impulse swirl meter. For the effects on performance and emission, the brake torque and brake specific fuel consumption were measured by engine dynamometer, NOx and smoke were measured by gas analyzer and smoke meter. The results of steady flow test are as follows; as the valve eccentricity ratio are closed to cylinder wall, the flow coefficient and swirl intensity are increased. Also we realized that there is a trade-off that the increase of swirl ratio decreases mean flow coefficient and increases the Gulf factor. And the optimum parameters to meet performance and emission through engine test are as follows; the swirl ratio 2.43, injection timing BTDC 13oCA and compression ratio 15.5.

• 한국지반공학회논문집
• /
• 제21권1호
• /
• pp.43-50
• /
• 2005

고압분사주입공법은 지반개량, 차수벽, 흙막이벽, 기초 보강말뚝 등에 사용되고 있다. 고압분사주입공법은 사질토지반에 대해서는 지수목적으로, 연약한 점성토 지반에서는 지반강화를 위하여 사용되고 있다. 그러나 현재 국내에 적용되고 있는 경우의 대부분은 지반조건에 따른 강도증가 효과를 경험적으로 파악하여 설계에 적용하고 있는 실정이고 이에 대한 많은 연구가 진행되고 있다. 본 연구에서는 고압분사주입공법의 지반교란에의 효율성을 증대시킬 목적으로 공동현상(cavitation) 이론을 응용하고자 하였다. 그리고 이를 정량적으로 분석하기 위하여 공동현상(cavitation)을 적용한 경우와 적용하지 않은 경우에 대해 지반조건, 주입압력 및 주입시간 등을 변화시켜가며 점성토 및 사질토 모형지반에 대하여 그라우팅을 실시하였다. 시험결과 공동현상(cavitation)을 적용한 경우 점성토 및 사질토 지반 모두 좋은 결과를 보여, 실제 공법에 적용가능성이 높은 것으로 나타났다.