• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2345-2347
• /
• 1998

This paper deals with the trajectory planning of IWR biped robot using genetic algorithm. The trajectory of a swing leg is generated by 5th order polynomial equation. Velocities and Acceleration properties on a viapoints are needed. These constants are given by heuristic method. The optimal values are determined by G.A to minimize the jerk of a trajectory. As a result, trajectory planning is implemented not on between two viapoints but on a whole interval. Efficient numerical calculation routines and walking algorithms for simulation are accomplished by MATLAB package.

• 드라이브 ㆍ 컨트롤
• /
• 제15권3호
• /
• pp.1-7
• /
• 2018

Humanoid robots have fascinated many researchers since they appeared decades ago. For the requirement of both accurate tracking control and the safety of physical human-robot interaction, torque control is basically desirable for humanoid robots. Humanoid robots are highly nonlinear, coupled, complex systems, accordingly the calculation of robot model is difficult and even impossible if precise model of the humanoid robots are unknown. Therefore, it is difficult to control using traditional model-based techniques. To realize model-free torque control, time-delay control (TDC) for humanoid robot was proposed with time-delay estimation technique. Using optimal walking trajectory obtained by particle swarm optimization, TDC with proposed scheme is implemented on whole body of a humanoid, not on biped legs even though it is performed by a virtual humanoid robot. The simulation results show the validity of the proposed TDC for humanoid robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.215-219
• /
• 2003

In this paper, we generate a trajectory minimized the energy gait of a biped robot for walking a staircase using genetic algorithms and apply to the computed torque controller for the stable dynamic biped locomotion. In the saggital plane, a 6 degree of freedom biped robot that model consists of seven links is used. In order to minimize the total energy efficiency, the Real-Coded Genetic Algorithm (RCGA) is used. Operators of genetic algorithms are composed of a reproduction, crossover and mutation. In order to approximate the walking gait, the each joint angle is defined as a 4-th order polynomial of which coefficients are chromosomes. Constraints are divided into equality and inequality. Firstly, equality constraints consist of position conditions at the end of stride period and each joint angle and angular velocity condition for periodic walking. On the other hand, inequality constraints include the knee joint conditions, the zero moment point conditions for the x-direction and the tip conditions of swing leg during the period of a stride for walking a staircase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.172-174
• /
• 2006

In this paper, we propose the trajectory generation method for bipedal walking on the stairs. This method is based on multi-masses inverted pendulum mode (MMIPM). MMIPM can effectively reduce the ZMP error but it is only applied to walking on the flat ground. In order to reduce ZMP error when a robot walks on the stairs, we generate the walking motion by MMIPM and modify that motion using parametric functions. We determine the values of the parameters by the simulations. Simulation results show that the robot can walk more stable on the stairs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.134.2-134
• /
• 2001

This paper treats the implementation of a statically stable control system for a biped walking robot with 10 degrees-of-freedom. Statically stable walking of a biped robot can be realized by keeping the center of mass (COM) inside the sole of the supporting foot (or feet) during single-support or double-support phases. We predetermined five static positions for walking based on the COM method. The positions can be represented by the length of the gait, the width between the feet, the height of the foot and two parameters in the hip movement. With the five parameters, we calculated the position trajectory. And we got the angular trajectories of 10 joints from the posit ion trajectory using the position tracking control and neural network. By tracking the angular trajectories, the robot can walk maintaining stability. We implemented walking of a biped robot throught the above ...

• 한국운동역학회지
• /
• 제28권4호
• /
• pp.237-244
• /
• 2018

Objective: Flat-footed people struggle with excessive ankle joint motion during walking and running. This study aimed to investigate the effects of customized three-dimensional 3D-printed insoles on the kinematics of flat-footed people during daily activities (walking and running). Method: Fifteen subjects (height, $169.20{\pm}2.61cm$; age, $22.87{\pm}8.48years$; navicular bone height, $13.2{\pm}1.00mm$) diagnosed with flat feet in a physical examination participated in this study. Results: The customized 3D-printed insoles did not significantly affect 3D ankle joint angles under walking and running conditions. However, they shifted the trajectory of the center of pressure (COP) laterally during fast walking, which enhanced the load distribution on the foot during the stance phase. Conclusion: The customized 3D-printed insoles somewhat positively affected the pressure distribution of flat-footed people by changing the COP trajectory. Further research including comparisons with customized commercial insoles is needed.

• 한국컴퓨터그래픽스학회논문지
• /
• 제27권1호
• /
• pp.1-8
• /
• 2021

본 논문에서는 캐릭터의 걷기 동작 데이터를 변형하는 방법을 제안한다. 이를 위하여 주 관절(root joint)의 이동 경로를 그래프로 분석하고 라플라스 연산자를 이용해 변형하는 방법을 사용한다. 주 관절의 경로는 동작 데이터의 각 프레임별 위치와 방향을 정점으로 하고 이를 인접 프레임의 정점과 연결한 그래프 형태로 나타낸다. 주 관절 경로를 라플라스 연산자를 이용하여 좌표계를 변환하고 이를 목표 위치 및 방향에 맞도록 반복적인 방법으로 해를 구하여 변형한다. 이 방법을 이용하여 동작 데이터의 걷기 스타일을 유지하면서 다양한 경로의 걷기 동작을 얻을 수 있게 되며 많은 비용이 드는 동작 데이터 취득을 최소화할 수 있다. 최종 모션은 변형된 주 관절 경로를 기준으로 기존 모션의 다른 관절을 위치시키고 후처리하여 생성한다. 본 논문에서 제안한 방법을 응용함으로써 적은 모션 데이터로도 복잡한 환경에서 캐릭터의 걷는 동작을 생성하는 것을 보인다.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.84-92
• /
• 2006

This paper deals with determination of motions of a humanoid robot using genetic algorithm. A humanoid robot has some problems of the structural instability basically. So, we have to consider the stable walking gait in gait planning. Besides, it is important to make the smoothly optimal gait for saving the electric power. A mobile robot has battery to move autonomously. But a humanoid robot needs more electric power in order to drive many joints. So, if movements of walking joint don't maintain optimally, it is hard to sustain the battery power during the working period. Also, if a gait trajectory doesn't have optimal state, the expected lift span of joints tends to be decreased. Also, if a gait trajectory doesn't have optimal state, the expected lift span of joints tends to be decreased. To solve these problems, the genetic algorithm is employed to guarantee the optimal gait trajectory. The fitness functions in a genetic algorithm are introduced to find out optimal trajectory, which enables the robot to have the less reduced jerk of joints and get smooth movement. With these all process accomplished by PC-based program, the optimal solution could be obtained from the simulation. In addition, we discuss the design consideration fur the joint motion and distributed computation of tile humanoid, ISHURO, and suggest its result such as structure of the network and a disturbance observer.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.452-460
• /
• 2005

Based on an introduced optimal trajectory planning method, this paper mainly deals with the accuracy analysis during the function approximation process of the optimal trajectory planning method. The basis functions are composed of Hermit polynomials and Fourier series to improve the approximation accuracy. Since the approximation accuracy is affected by the given orders of each basis function, the accuracy of the optimal solution is examined by changing the combinations of the orders of Hermit polynomials and Fourier series as the approximation basis functions. As a result, it is found that the proper approximation basis functions are the $5^{th}$ order Hermit polynomials and the $7^{th}-10^{th}$ order of Fourier series.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.528-532
• /
• 2017

The Theo Jansen mechanism using 1 degree of freedom is special system of walking robot. The trajectory made by the point of ground position is similar to other walking robot using many degrees of freedom. Because of diversity of design parameter of the Jansen mechanism, it makes a lot of trajectory and takes possibilities of optimization. However this research doesn't focus on the optimization of trajectory, but it focused on comprehensive design of the robot using well-known trajectory and line tracer logic to go fast and accurate along the line. The logic to follow a line has many kinds of possibility of algorithm. To eliminate uncertainty about recognizing a line, I divide the case of line following situation and make optimized logic.