• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.9-17
• /
• 2005

비정상 패널법을 이용하여 복엽기 형태 배치의 복식 플랩핑 에어포일들에 대한 후류의 형상 및 추력 특성을 연구하였다. 에어포일들에서 발생하는 후류 형상은 와핵 모델, 와핵 첨가법 그리고 4계 Runge-Kutta 법을 사용하여 계산하였다. 해석 결과는 유동 가시화, 엄밀해 그리고 전산 해석 결과와 비교하여 검증하였다. 복엽기 배치의 에어포일의 경우, 두께 및 캠버는 추력을 감소시키는 효과가 있었다. 플런징과 피칭 운동들 사이의 위상차가 90도 및 120도 일 때 최대 추력이 발생하였다. 플런지 속도 및 피치 크기가 클수록 추력은 증가하였다. 에어포일 사이의 거리가 감소할수록 추력은 증가하나, 0.6c 이하로 가까워질 경우 추력은 감소하였다.

• 설비공학논문집
• /
• 제17권5호
• /
• pp.404-409
• /
• 2005

This study is to investigate effects of thermal conditions on sleep. Five female university students participated in the sleep experiment. Three temperature levels (22, 26, and $30^{\circ}C$) were given, and relative humidity was maintained to $50\%$. When as subject arrived in the chamber at 9 o'clock in the evening, questionnaire was given to check physical and psychological conditions. After checking conditions, subjects went to bed till 07 : 30 in the morning. Body movement was checked during sleeping. After sleep in the chamber, questionnaire was given to the subject in order to check sleep quality. Subjects evaluated sleep quality by themselves by answering the time they fall asleep and wake up, frequency of wake during sleep, causes of each waking, and feeling after sleep. Sleep quality was rated with 7-point scale. At $30^{\circ}C$ condition, body movement was significantly higher than of other thermal conditions. The best sleep quality was obtained at the $26^{\circ}C$ condition, while the worst sleep was taken at the $30^{\circ}C$ condition.

• Wind and Structures
• /
• 제15권4호
• /
• pp.313-329
• /
• 2012

There have existed for a number of years good practice guidelines for the use of Computational Fluid Dynamics (CFD) in the field of wind engineering. As part of those guidelines, details are given for the size of flow domain that should be used around a building of height, H. For low-rise buildings, the domain sizes produced by following the guidelines are reasonable and produce results that are largely free from blockage effects. However, when high-rise or tall buildings are considered, the domain size based solely on the building height produces very large domains. A large domain, in most cases, leads to a large cell count, with many of the cells in the grid being used up in regions far from the building/wake region. This paper challenges this domain size guidance by looking at the effects of changing the domain size around a tall building. The RNG ${\kappa}-{\varepsilon}$ turbulence model is used in a series of steady-state solutions where the only parameter varied is the domain size, with the mesh resolution in the building/wake region left unchanged. Comparisons between the velocity fields in the near-field of the building and pressure coefficients on the building are used to inform the assessment. The findings of the work for this case suggest that a domain of approximately 10% the volume of that suggested by the existing guidelines could be used with a loss in accuracy of less than 10%.

• 융합경영연구
• /
• 제5권2호
• /
• pp.33-39
• /
• 2017

As the aging population geworsened by the a of the low fertility rate in the wake of the birth of the low birth rate, the rapid increase in the retirement age of the baby boomers in the wake of the birth of the Korean War is a significant indication of the separation of the aged and the role of the economically rich and the role of the role of the economically rich. Therefore, this study aims to address issues and countermeasures. The study aims to provide basic data for the future life of the baby boom generation by examining the problems and responses to the economic activity after the retirement activity of the baby boomers. The research suggests that the limit was limited to the retirement age of the baby boomer generation in order to boost the employment of the elderly. Due to the lack of exploration of the exploratory research, the lack of analysis of exploratory facts is the biggest limitation of the analysis. So, further analysis of this will lead to meaningful studies. Looking at the composition of this study, the introduction of the study included the necessity and purpose of the study. The focus on the point was on the concepts and characteristics of the baby boomer, and analyzed the characteristics of the economic activity and analyses and analyses of domestic and international cases. In conclusion, the issue was drawn up and the alternatives were sought.

• 대한전자공학회논문지SD
• /
• 제49권2호
• /
• pp.23-30
• /
• 2012

본 논문에서는 음 바이어스 온도 불안정성 (NBTI) 효과에 의해서 야기되는 파워 게이팅 구조의 성능 저하와 증가하는 기상시간을 보상하기위한 새로운 적응형 헤더기반의 파워 게이팅 구조를 제안한다. 제안된 구조는 두 개의 패스 (two-pass)를 가지는 파워 게이팅 구조에 기반을 둔 폭 변화 헤더(header)와 적응형 제어를 위한 새로운 NBTI 센싱 회로로 구성된다. 본 논문의 시뮬레이션 결과는 적응형 제어를 하지 않는 파워 게이팅의 시뮬레이션 결과와 비교되며, 그 결과는 파워 게이팅 구조에서 누설 전력과 돌입 전류(rush current)을 작게 유지하면서 회로 지연과 기상시간에 대한 NBTI 의존성이 단지 3% 와 4% 내로 줄어든다는 것을 보여준다. 본 논문에서는 45nm CMOS 공정과 NBTI 예측 모델이 제안된 회로를 구성하기 위해서 사용된다.

• 대한전자공학회논문지SD
• /
• 제44권11호
• /
• pp.51-55
• /
• 2007

PLC 홈 네트워크용으로 보급되고 있는 스위치, 콘센트, 가스제어기 등의 단말기들은 일반적으로 부하가 연결되지 않은 상태에도 원격제어 또는 기기 간의 제어, 상태 감시 등을 위하여 항상 Wake-up 상태를 유지하고 있어야 한다. 이로 인하여 대기 시 불필요한 전력을 소비하는 문제점을 갖고 있다. 본 논문에서는 대기 시 소비 전력 및 동작 시 소비 전력을 최소화한 절전형 PLC 2구 스위치를 개발하였다. 대기 시 소비전력 최소화를 위해 Sleep Mode 전환 및 전력선 통신부와 제어부의 분리 등 회로를 개선을 하였으며 동작 시 소비전력 최소화를 위해 유지 제어방식에서 순간 제어방식으로 전환하였으며, 이로부터 스위치 수명 연장 및 고장률을 최소할 수 있었다. 기존 스위치에 비해 대기 시 약 0.95[W] 절감, 동작 시 약 3.2[W] 절감으로 에너지 절감을 실현하였다.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제20권3호
• /
• pp.146-151
• /
• 2009

Objectives : We conducted this study to investigate the relationship between sleep duration and body mass index (BMI), in Korean children. Methods : We performed a cross-sectional analysis of data collected on 3,639 boys and girls (aged 7-12) in Daegu, Korea. The data included each child's age, sex, weight, height, extracurricular activities, bedtime, wake-up time, sleep latency, total sleep duration, parents' occupations, and parents' educational levels. The relationship between sleep duration and each variable was examined via analysis of variance (ANOVA). Results : The analysis showed an association between short sleep duration and high BMI. Boys showed a graded inverse relationship between sleep duration and BMI. However, there was no significant corresponding result for girls. In the total sample, hours of computer use, time when the computer was turned off, time when the television was turned off, mother's bedtime, and hours of extracurricular activity were associated with longer sleep duration. No association was found between sleep duration and hours of watching television, child's wake-up time, or educational level of the parents. Conclusion : The results of this study show an inverse relationship between a child's sleep duration and BMI；thus, children with shorter sleep duration tend to have higher BMIs.

• 한국멀티미디어학회논문지
• /
• 제10권3호
• /
• pp.348-357
• /
• 2007

제한된 전원으로 동작해야 하는 센서 노드의 수명 연장을 위하여, 에너지 효율적인 센서 노드의 동작에 대한 많은 연구가 진행되었다. 그들 중에는 주기적으로 무선 송수신 모듈을 활성화 / 비활성화 하면서 정보전달을 위하여 인접 노드가 깨어나는 시점에 대한 정보를 필요로 하는 기법들이 존재한다. 클락 동기는 이러한 기법들에서 무선 송수신 모듈의 활성화 / 비활성화 스케줄링을 위하여 필수적인 요소이다. 본 논문에서는 센서 망에서 전역 클락 동기를 위하여 제안된 비동기 평균 알고리즘을 기반으로 주기적인 무신 송수신 모듈 활성화 / 비활성화 기법에서의 클락 동기 방법을 제안한다. 구체적으로 본 논문은 (1) 초기 자율적인 망 구성 시점에 필요한 신속한 클락 동기 방법과 (2) 에너지 소모를 최소화한 주기적인 클락 동기 방법 및 (3) 두 가지 동기 방법들 간의 전환 시점 판단 방법을 제안한다. 시뮬레이션을 통하여 제안한 방법의 클락 오차 범위와 교환되는 메시지 수를 분석한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.164-165
• /
• 2015

Modular construction technique is an adaptation of factory-based mass production concept in ordinary manufacturing industries to construction industry and it assumes that panels, units, etc. are fabricated in factories and assembled in construction sites. Given its structural limitations, modular construction technique is primarily used in low-story buildings whose maximum height is usually five stories, but researchers are actively studying possible adaptation of modular construction technique to high-rise building designs these days as in the case of infill-type modular construction design. Infill-type modular construction technique, most frequently used in high-rise building construction projects, completes frame construction first in reinforced concrete structures and fills unit modules in such structures. However, infill-type modular construction technique leads to longer construction schedule accompanying increase in construction cost, cost overrun due to additional of temporary work, and possible damage to units in the wake of facility construction. Accordingly, this study is performed as a basic study for the development of bottom-up infill-type modular construction technique intended to construct structural frames and fill in units sequentially in a bid to address such drawbacks of current infill-type modular construction technique.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.39-45
• /
• 2010

The turbulent flows in a tunnel mock-up($10L{\times}0.5W{\times}0.25H$ m3 : scale reduction 1/20) with rectangular cross section were investigated. The instantaneous velocity fields of Re = 49,029, 89,571 were measured by the 2-D PIV system which is consisted of double pulsed Nd:Yag laser and the tracer particles in the straight-duct mock-up where the flows were fully developed. The mean velocity profiles were taken from the ensemble averages of 1,000 instantaneous velocity fields. Simultaneously, numerical simulations(RANS) were performed to compare with experimental data using STREAM code. Non-linear eddy viscosity model (NLEVM : Abe-Jang-Leschziner Eddy Viscosity Model) was employed to resolve the turbulent flows in the duct. The calculated mean velocity profiles were well compared with PIV results. In the log-law profiles, the experimental data were in good agreement with numerical simulations all the way to the wake region except the viscous sub-layer (near wall region).