• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.63.2-63.2
• /
• 2019

Eight hundred thousand asteroids in the solar system have been identified so far under extensive sky surveys. Kilometer to sub-km sized asteroids, however, are still waiting for discovery, and their size and orbital distribution will provide a better understanding of the collisional and dynamical evolution of the solar system. In order to study the number of asteroids which is detectable with 1.6 m telescope and their orbital distribution, we conducted a small observation campaign as a part of Deep Ecliptic Patrol of the Southern Sky (DEEP-South) project, which is an asteroid survey in the southern hemisphere with Korea Microlensing Telescope Network (KMTNet). We observed the ecliptic plane near opposition ($2^{\circ}{\times}2^{\circ}$ field of view centering on ${\alpha}=22h40m31s$, ${\delta}=-08^{\circ}22^{\prime}58^{{\prime}{\prime}}$) in August 2018, and identified 464 moving objects by visual inspection. As a result, 266 of 464 moving objects turn out to be previously unknown asteroids, and their signal to noise ratio is below two on numerous occasions. Most of the newly detected objects are main belt asteroids (MBAs), while three Hildas, one Jupiter trojan, and two Hungarias are also identified. In this meeting, we report the differences in the orbital distributions between the previously known asteroids and newly discovered ones using statistical methods. We also talk about the observational bias of this survey and suggest future works.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.7
• /
• pp.81-91
• /
• 2022

The aim of this paper was to analyze the determinants of the extent of individual credit rationing at Can Tho Military Commercial Joint Stock Bank (MB). The data was collected from 150 customers according to the systematic random sampling method listed in the bank. This study employed quantitative analysis methods, and Tobit regression model, to test the proposed hypotheses. The results showed that the average loan amount of an individual customer was 1,181.3 million VND, the average credit limit was 48.6%, and the average interest rate was 10.9% per year. Most of the individual customers borrowed money to buy properties. In addition, the analysis results also indicated that individual borrowers still faced some difficulties in accessing bank credit, such as cumbersome procedures, long waiting times, insufficient collateral assets, and loan documents. The results of the Tobit model pointed out that there were five factors affecting the degree of credit rationing to individual customers at the bank, including (1) Collateral, (2) Income, (3) Credit history, (4) Loan purpose, (5) Relationship between borrower and bank. Based on the empirical findings, the possible solutions for the bank and individual borrowers to improve credit efficiency for individual customers at commercial banks are obtained.

• Child Health Nursing Research
• /
• v.8 no.1
• /
• pp.55-66
• /
• 2002

It is an important task to give adequate nutritions to infants and to wean properly for rapid growth. This study was conducted to survey on doing the weaning activities of the first-time mother. This study was to provide basic data of health teaching and nursing intervention for the promotion of ideal weaning activities. Survey was done from January to February in 2001. Total 444 mothers who have first-time baby under twelve month old were interviewed in five community health center around contry (Seoul, Choung-ju, Asan, Cheon-an, Jeju). The results are summarized as follows; Starting time of weaning was common in four month old(40.4%). Most common daily weaning times by age showed once(under 3 months), twice(4 to 7 months), three times(8 to 12 months). The younger, the more commercial weaning products(p<0.01). Education level showed relatively positive relation with home-made weaning food(p<0.05). Items showed low scores in 4 to 7 months group were starting new food item, waiting at least one week interval to new food, feeding by milk bottle, allowing grasping spoon, consulting pediatrician for problems after weaning, starting from morning, regular schedule. Items showed low scores in 8 to 12 months group were feeding whole egg rather than yolk only up to 12 months, keeping weaning interval were increased, feeding by milk bottle, trying various cooking method, not giving commerical cooking and instant food and unproper raw milk feeding. In weaning activities by general factors, mother age, health status, marriage duration, monthly income were statistically significant (p<0.05). To improve good weening activities, targetting on low maternal age and poor health status, and low income group, developing teaching materials and training program for items showed low scores and proper weaning time, type of easy home-made food and easy cooking method should be provided. Further study on effect of nursing intervention to improve weaning activities are needed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.120-128
• /
• 2018

OLED Display fabrication system is one of the most complicated discrete processing systems in the world. As the glass size grows from $550{\times}650mm$ to $1,500{\times}1,850mm$ in recent years, the efficiency of Automated Material Handling System (AMHS) has become very important and OLED glass manufacturers are trying to improve the overall efficiency of AMHS. Aiming to meet the demand for high efficiency of transportation, various kind of approaches have been applied for improving dispatching rules and facility layout, while simultaneously considering the system parameters such as glass cassettes due date, waiting time, and stocker buffer status. However, these works did not suggest the operational policy and conditions of distribution systems, especially for handling unnecessary material flows such as detour. Based on this motivation, in this paper, we proposed an efficient algorithm for improving detour transportation in OLED FAB. Specifically, we considered an OLED FAB simplifying OLED production environment in a Korean company, where four stockers are constructed for the delivery of Lot in a bay and linked to processing equipments. We developed a simulation model using Automod and performed a numerical experiment using real operational data to test the performance of three operation policies under considerations. We showed that a competitive policy for assigning alternative stocker in case of detour was superior to the current dedicated policy using a specified stocker and other considered policies.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.3
• /
• pp.172-182
• /
• 2013

In this study we consider a flow line CONWIP system in which two types of product are produced. The processing times of each product type at each station follow an independent exponential distribution and the demands for the finished products of each type arrive according to a Poisson process. The demands that are not satisfied instantaneously are either backordered or lost according to the number of unsatisfied demands that exist at their arrival instants. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts of each product type at each station, mean waiting times of backordered demands and the proportion of backordered demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a two class closed queueing network with a synchronization station and analyze the closed queueing network using a product-form approximation method for multiple classes developed by Baynat and Dallery. In the approximation method, each subsystem is analyzed using a matrix geometric method. Comparisons with simulation show that the approximation method provides fairly good results for all performance measures.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.3
• /
• pp.1-14
• /
• 2022

This study is a plan on the way to strengthen the survival ability by increasing the use time of air respirator by applying emergency breathing method in the situation where firefighter has to wait for RIT (Rapid Intervention Teams) because it is impossible to escape by himself or emergency escape during isolation during field activities. The research procedure first drew problems by conducting a survey on fire fighters under the Seoul Fire and Disaster Headquarters, and conducted an experiment to compare normal breathing and emergency breathing with 20 members of the Seoul 119 Special Rescue Team, and suggested emergency breathing method and training process modeling that can be applied to each field situation based on the data obtained. The experiment was conducted over 9 weeks, and it was divided into three categories: field activity situation, movement (emergency escape assumption) situation, and place (assume waiting for RIT). In the field activity situation experiment, it was confirmed that the application of skip breathing method was appropriate and the use time of air respirator increased about 1.6 ~ 1.9 times. In the moving situation or the in-situ situation, wheel breathing method was appropriate and the use time of air respirator increased about 1.6 ~ 2.4 times. However, when conducting intense activities in the field activity situation, it is recommended to use it limitedly because it is difficult to apply the emergency breathing method. If emergency breathing is not clearly learned in the body, it is difficult to use in the field, so I think systematic and continuous training is necessary. This study suggests that the application of emergency breathing method is effective enough to strengthen the survival ability of firefighters in the field.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.943-948
• /
• 2021

The purpose of this study was to investigate changes in surface dose due to increased scattering of gamma rays from patients injected with ^99mTc and ¹⁸F, which are radioactive isotopes, in close contact with materials with high atomic number such as the walls of the stable room. Prepare ^99mTc and ¹⁸F by injecting 20 and 10 mCi respectively into the NEMA phantom, and then measuring the surface dose for 60 minutes by positioning the phantom at a height of 1 m above the surface, at a distance of 0, 5 and 10 cm from the wall, and at the same location as the phantom facing the wall. Each experiment was repeated five times for reproducibility of the experiment and one way analysis of variability (ANOVA) was performed for significance testing and Tukey was used as a post-test. The study found that surface doses of 220.268, 287.121, 243.957, and 226.272 mGy were measured at ^99mTc, respectively, in the case of empty space and in the case of 0, 5 and 10 cm, while those of ¹⁸F were measured at 637.111, 724.469, 657.107, and 640.365 mGy, respectively. In order to reduce changes in surface dose depending on the patient's location while waiting, it is necessary to keep the distance from the ground or the wall where the patient is closely adhered to, or install an air mattress, etc., to prevent the scattered lines as much as possible, considering the scattered lines due to the wall etc. in future setup of the patient waiting room and safety room, and in addition to the examination, the external skin width may be reduced.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.67-76
• /
• 2023

COVID-19, which occurred in 2019, has a strong contagious power, has serious symptoms of infection and after-effects, and death in severe cases depending on the underlying disease and symptoms. As COVID-19 is highly contagious, in Korea, screening clinics have been set up across the country to determine whether or not to be positive for COVID-19 and isolate the infected to prevent the spread of COVID-19. However, there are cases where COVID-19 test applicants flock to screening clinics and cannot receive tests due to longer waiting times, and there is a risk that secondary infections may occur in the atmosphere. In this study, the reservation and notification system can be applied from the existing screening care system to solve spatial constraints, reducing waiting time with screening appointments, and solving population bottlenecks to screening clinics. Taking the COVID-19 pandemic as an experience, we propose a system that can present directions in future pandemic situations. To process real-time data, we use Google's Firebase to use Realtime Database in the cloud environment. Because a real-time database is used, users can check the status of screening clinics in real time through the app, make reservations, and receive notifications about test reservations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.527-536
• /
• 2022

The purpose of this study is to predict changing traffic environments and related economic effects by reflecting the changed KTDB and socio-economic indicators pertaining to Mulgeum station, a general railway stop, when it is confirmed as a KTX stop. To analyze the data of this study, socioeconomic indicators and the general status of transportation facility operations were investigated with reference to related statistical data, centered on the country overall and on Yangsan city in particular. In addition, we investigated and referenced the railroad facility construction plan and train operation plan, which are national high-level plans related to land development and transportation network construction. Currently, there are only ITX trains (4 times/day) and Mugunghwa trains (29 times/day) that stop at Mulgeum station in Yangsan, meaning that passengers cannot use KTX trains in the Yangsan area. In particular, the need for a KTX stop at Mulgeum station has been continuously raised because train users in the Yangsan area have inconvenient transportation in that they must travel 40 minutes to Ulsan station or 30 minutes to Gupo station to use the KTX. As a result of analyzing railroad transportation demand that will change in the future as the KTX stop at Mulgeum station is confirmed, the number of passengers boarding and arriving at Mulgeum station is predicted to be 1,674 passengers/day by 2025. In addition, the numbers of train passengers that are converted from Ulsan and Gupo stations due to the stop at Mulgeum station are predicted to be 594 passengers/day boarding and 562 passengers/day arriving by 2025. In the future, if Yangsan citizens use the KTX Mulgeum station, the access time to Mulgeum station can be shortened to 22 minutes from 65 minutes, and it is predicted that the inconvenience of transferring between railroads will be resolved, with the waiting time for transfers reduced by up to a maximum of 40 minutes. Therefore, the economic effect of creating a KTX stop at Mulgeum station was analyzed to be B/C=1.823 when general railroad operating costs are not taken into account and B/C=2.127 when general railroad operating costs are considered. In conclusion, when using KTX trains to visit the Seoul Metropolitan Area, it takes 2 hours and 43 minutes to use Mulgeum station without using Ulsan station or Gupo station, which is considered to be very effective for reducing travel times and improving the economic feasibility of this development; it is also expected that Yangsan city will be able to improve accessibility and mobility to the Seoul Metropolitan Area by breaking free from the disgrace of being a remote location given its link to KTX in the future.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.50-56
• /
• 2012

Purpose: Those who access to the nuclear medicine department are classified as radiation workers, temporarily access group, and occasional access group as defined by the atomic energy law. The radiation workers and temporarily access people wear a personal radiation dosimeter for checking their own radiation absorbed dose periodically. However, because of the sanitation workers, classified as temporarily access group, who are working in the nuclear medicine department are moved in a cycle with other departments and their works are changeful, it is hard to control their radiation absorbed dose. Thus, this study is going to examine the state of the sanitation worker's radiation absorbed dose, and then make sure whether they are classified as temporarily access group or not. Materials and methods: In the first instance, the first sanitation worker who works in vitro laboratory and PET room and the second sanitation worker who works in gamma camera rooms (invivo room) wore radiation dosimeter-OSL(Optically Stimulated Luminescence)- to measure their own radiation absorbed dose during work time from May to June 2011. Secondly, this study was taken place 5 places in gamma camera rooms, 2 places in PET bed room, operating room, waiting room and cyclotron room in PET and 4 places in vitro laboratory. And then to measure the radiation space dose rate, it is measured 10 times each of places as sanitation worker's work flow by using radiation survey meter. Results: The radiation absorbed dose on OSL of the first c who works in vitro laboratory and PET room and the second one who works in gamma camera rooms are 0.04, 0.02 mSv per month respectively. That means the estimated annual radiation absorbed doses are less than 1mSv as 0.48, 0.24 mSv/yr respectively. The radiation space dose rates as sanitation worker's work flow using survey meter are 0.0037, 0.0019 mSv/day, so the estimated annual radiation absorbed dose are 0.93, 0.47 mSv/yr respectively. The weighted exposure dose of first sanitation worker of each places are 1.62% in cyclotron room, 3.88% in waiting room, 2.39% in operating room, 81.01% in bed room of PET and 11.01% in vitro laboratory. The weighted exposure dose of second sanitation worker of each places are 45.22% in radiopharmaceutical laboratory, gamma 30.64% in camera rooms, 15.65% in waiting room, 8.49% in reading room. Conclusion: The annual radiation absorbed doses on OSL of both sanitation workers are less than 1 mSv per year and the annual radiation absorbed doses by using survey meter are less than 1mSv either, but close up to 1 mSv. Thus, to clarify whether the sanitation workers are temporarily access group or not, and to be lessen their s radiation absorbed dose, they should be educated about management of radiation and modified their work flow or work time appropriately, their radiation absorbed dose would be lessen certainly.