• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.322-329
• /
• 2009

Many researches in wireless sensor networks have used a geographic routing to effectively disseminate data between sinks and sources. To know the location information, the geographic routing has proposed two manners. A sink-initiated and a source-initiated are flooding to disseminate its location information in WSN. However, these two manners have two problems. Firstly, whenever they move, they flood their location information. Secondly, their location information is disseminated unnecessary nodes besides nodes which send and receive data in actually. Therefore, this paper proposes a protocol that can solve the two problems and disseminate effectively data between few sinks and few sources. The proposed protocol exploits a location information manager that manages location information of the sinks and the sources. We also compare the performance of the proposed protocol with the existing protocols through a simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.776-796
• /
• 2010

Integrated RFID-WSNs (wireless sensor networks) have recently been researched to provide object identities, sensing information, mobile service, and network functionalities. In integrated RFID-WSNs, the reader collision is one of the critical problems. Above all, due to the absence of universally applicable anti-collision protocols and the channel capture phenomenon, the medium access control protocols in integrated RFID-WSNs suffer from reader collision and starvation problems. In this paper, we propose an efficient MAC protocol, called EMP, to avoid the above problems in integrated RFID-WSNs. EMP is a CSMA-based MAC protocol which is compatible with sensor networks operating on integrated nodes which consist of an RFID reader and a senor node. EMP resolves not only the reader collision problem, but also the starvation problem using a power control mechanism. To verify the performance of EMP, we compared it with other anti-reader collision MAC protocols using simulations. As a result, the performance of EMP showed improvements in throughput, system efficiency, and energy consumption compared to the single data channel protocols (CSMA/CA, Pulse, and DiCa) in dense deployment environments.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.121-129
• /
• 2011

One of the major challenges of minimum energy consumption for wireless sensor networks(WSN) environment. LEACH protocol is hierarchical routing protocol that obtains energy efficiency by using clustering. However, LEACH protocol in each round, because the new cluster configuration, cluster configuration, whenever the energy consumed shorten the life of the network. Therefore in this paper, the cluster is formed in WSN environment in early stage and the problems with energy waste have been solved by selecting C-node. In the initial round of proposed model uses 26 percent more than traditional LEACH energy consumption. However, as the round is ongoing, it has been proved by the network simulation tool that the waste of energy could be diminished up to 35%.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.292-300
• /
• 2008

In multi-hop wireless networks like Wireless Mesh Networks (WMN) and Wireless Sensor Networks (WSN), nodes often rely on batteries as their power source. In such cases, energy efficient routing is critical. Many schemes have been proposed to find the most energy efficient path, but most of them do not achieve optimality on network lifetime. Once found, the energy efficient path is constantly used such that the energy of the nodes on the path is depleted quickly. As an alternative, the approaches that dynamically change the path at run time have also been proposed. These approaches, however, involve high overhead of establishing multiple paths. In this paper, we first find an optimal multi-path routing using LP. Then we apply an approximation algorithm to derive a near-optimal solution for single-path routing. We compare the performance of the proposed scheme with several other existing algorithms through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.637-646
• /
• 2012

Recently, Wireless Sensor Networks (WSNs) are used in many applications. When sensor nodes are deployed on special areas, where humans have any difficulties to get in, the nodes form network topology themselves. By using the sensor nodes, users are able to obtain environmental information. Due to the lack of the battery capability, sensor nodes should be efficiently managed with energy consumption in WSNs. In specific applications (e.g. in intrusion detections), intruders tend to occur unexpectedly. For the energy efficiency in the applications, an appropriate algorithm is strongly required. In this paper, we propose tree-based routing algorithm for the specific applications, which based on the intrusion detection. In addition, In order to decrease traffic density, the proposed algorithm provides enhanced method considering link cost and load balance, and it establishes efficient links amongst the sensor nodes. Simultaneously, by using the proposed scheme, parent and child nodes are (re-)defined. Furthermore, efficient routing table management facilitates to improve energy efficiency especially in the limited power source. In order to apply a realistic military environment, in this paper, we design three scenarios according to an intruder's moving direction; (1) the intruder is passing along a path where sensor nodes have been already deployed. (2) the intruders are crossing the path. (3) the intruders, who are moving as (1)'s scenario, are certainly deviating from the middle of the path. In conclusion, through the simulation results, we obtain the performance results in terms of latency and energy consumption, and analyze them. Finally, we validate our algorithm is highly able to adapt on such the application environments.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.65-72
• /
• 2014

Sensor nodes are easily compromised by attacker when which are divided in open environment. The attacker may inject false report and false vote attack through compromised sensor node. These attacks interrupt to transmission legitimate report or the energy of sensor node is exhausted. PVFS are proposed by Li and Wu for countermeasure in two attacks. The scheme use inefficiency to energy of sensor node as fixed report threshold and verification node. In this paper, our propose the next neighbor node selection scheme based on fuzzy logic system for energy improvement of PVFS. The parameter of fuzzy logic system are energy, hops, verification success count, CH select high the next neighbor node among neighbor nodes of two as deduction based on fuzzy logic system. In the experimental, our proposed scheme was improvement to energy of about 9% compare to PVFS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.437-446
• /
• 2017

70 percent of Korea's territory is covered with mountains, whose difficult conditions can cause damage to facilities. Recently, the demand for facilities related to outdoor activities including monorails has been on the rise, and such facilities are much more likely to become damaged. For this reason, a monitoring system applying IoT to mountainous areas was developed and its applicability is evaluated in this study. The current status of the existing mountainous facilities and monitoring systems were reviewed, and the current wired monitoring technology was analyzed. A scenario for IoT-based monitoring was developed, and then sensor nodes were developed, which include an RF-communication module and interface, power-supply and solar-cell. A testbed was set up at K University. The same data was collected by the wireless system as had been collected by the wired one. The study findings are as follows. Firstly, by using the wireless system, it is estimated that the construction duration can be reduced by about 25 percent, while the construction costs can be reduced by about 3~52 percent. Secondly, the safety of the construction workers can be improved by making the working conditions less dangerous, such as by eliminating the need to transport cables.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.11-18
• /
• 2014

Most of the energy efficient MAC protocols for wireless sensor networks (WSNs) are based on duty cycling in a single channel and show competitive performances in a small number of traffic flows; however, under concurrent multiple flows, they result in significant performance degradation due to contention and collision. We propose a multi-channel pipelining (MCP) method for convergecast WSN in order to address these problems. In MCP, a staggered dynamic phase shift (SDPS) algorithms devised to minimize end-to-end latency by dynamically staggering wake-up schedule of nodes on a multi-hop path. Also, a phase-locking identification (PLI) algorithm is proposed to optimize energy efficiency. Based on these algorithms, multiple flows can be dynamically pipelined in one of multiple channels and successively handled by sink switched to each channel. We present an analytical model to compute the duty cycle and the latency of MCP and validate the model by simulation. Simulation evaluation shows that our proposal is superior to existing protocols: X-MAC and DPS-MAC in terms of duty cycle, end-to-end latency, delivery ratio, and aggregate throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.144-153
• /
• 2010

Flooding based routing protocols are usually used to disseminate information in wireless sensor networks. Those approaches, however, require message retransmissions to all nodes and induce huge collision rate and high energy consumption. In this paper, HoGoP (Hop based Gossiping Protocol) in which all nodes consider the number of hops from sink node to them, and decide own gossiping probabilities, is introduced. A node can decide its gossiping probability according to the required average reception percentage and the number of parent nodes which is counted with the difference between its hop and neighbors' ones. Therefore the decision of gossiping probability for network topology is adaptive and this approach achieves higher message reception percentage with low message retransmission than the flooding scheme. Through simulation, we compare the proposed protocol with some previous ones and evaluate its performance in terms of average reception percentage, average forwarding percentage, and forwarding efficiency. In addition, average reception percentage is analyzed according to the application requirement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1003-1010
• /
• 2018

The geomagnetic sensor nodes are usually designed with wireless communication and battery for easy installation on the road without cable connection and wiring. To minimize operation cost of a system, it is important to prolong the battery lifetime of the geomagnetic sensors installed on the road. In this paper, we propose a low-power TDMA MAC protocol that reduces energy consumption while guaranteeing the real-time vehicle detection information in the vehicle detection system. The performance evaluations are conducted through a real testbed of a vehicle detection system, and it proves that the proposed low-power protocols provides 5 year lifetime by improving energy efficiency up to about 62%.