• 한국인쇄학회지
• /
• 제26권1호
• /
• pp.113-124
• /
• 2008

Viscosity of cellulose pulp was greatly decreased with endo-xylanase treatment but tiny decreased with exo-xylanase treatment. Change of freeness was greatly influenced with exo-xylanase treatment. The first stage of refining(5,000 revolution), freeness was greatly decreased with exo-xylanase treatment. After middle stage of refining(10,000 revolution) change of freeness was similar to endo-xylanase treatment. WRV(water retention value) was more effective exo-xylanas than endo-xylanase treatment. Interfiber bonding of cellulose fiber was disintegrated with exo-xylanse treatment.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.8-17
• /
• 2005

WCT (Wet compaction test) is a new fiber evaluation method developed recently by Seo and its test results can be used as a predictor for pulp quality and its paper property Bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) were used for the furnishes to be tested by WCT We compared the WCT results to conventional fiber evaluation tests such as WRV (Water Retention Value), free ness, and fiber length in this study, and found that WCT always gave better regression coefficients in relation to pulp quality (drainage), and paper properties (density, tensile, tear, and burst strength). WCT may be used on-line in papermachine.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 추계학술발표논문집
• /
• pp.129-130
• /
• 2000

기존에 발표된 논문에서 섬유를 고해하기 전에 물리적 전처리를 함으로써 같은 여수도에서 섬유길이의 손상없이 섬유의 WRV 가 증가하는 사실을 발표한 바 있다. 이러한 Hobart m mixer를 이용한 섬유의 전처리가 과연 화학펄프섬유의 건조시 발생하는 각질화 ( (Homification)를 역전시킬 수 있는지를 본 연구에서 알아보았다. 현재까지의 실험결과 침 엽수 표백화학펄프의 경우 건조시 각질화가 많이 일어나지 않은 경우 (섭씨 80도의 저온에 서의 건조) 에는 거의 완벽한 각질화의 역전이 일어났지만 건조온도가 높아져서 심한 각질 화가 예상되는 경우 (섭씨 110도) 에는 물리적 전처리의 효과가 나타나지 않았다. 따라서 H Hobart mixer를 이용한 물리적 전처리는 각질화가 많이 진행되지 않은 경우에는 섬유의 불 리적 특성올 회복시킬 수 있는 수단이 될 수 있다고 판단되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 추계학술발표논문집
• /
• pp.127-128
• /
• 2000

침엽수 및 활엽수 표백화학펼프와 KOCC를 Hobart mixer로 고해전에 전처리를 실시하였다. 처리온도를 섭씨 4도, 20도,60도로 변화를 주었으며, 전처리후 고해를 실시하여 섬유의 변 화를 측정하였다 .. 4도와 20도에서의 처리는 같은 여수도하에서 섬유의 WRV 및 강도를 높 이는 효과가 있었지만 60도에서는 다소 전처리효과가 떨어졌다Hoba$\pi$ mIxer 와 비슷한 효과를 낼 수 있는 Kneader 및 Screw press 와 문헌적 수치로 비교해 볼 때, Hobart mixer 는 이들과 다른 독특한 효과를 보이고 있었다.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.34-40
• /
• 2000

This study was carried out to evaluate the effects of enzymatic treatment on the characteristics of KOCC. Novozym 342 and Pulpzyme HC were used for this purpose. Enzymatic treatment greatly increased the freeness of KOCC and Novozym 342 was more effective. WRV was improved only when KOCC was treated with 0.1% Pulpzyme HC. Pulpzyme HC was more effective to improve the flexibility of fiber(conformability angle) than Novozym 342. Coarseness of fiber was decreased with the enzymatic treatment. Fines content greatly decreased with 0.01% addition of enzymes. Novozym 342 was more effective than Pulpzyme HC for this purpose. Apparent density, tensile index and tear index decreased with enzymatic treatment, but stiffness increased. Especially the decrease of apparent density, tensile index and tear index by the treatment with Novozym 342 was significant than those of Pulpzyme HC. Therefore Novozym 342 will be suitable for the removal of fines and for bulky sheet, otherwise Pulpzyme HC will be good.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.1-7
• /
• 2003

In this study, fiber mechanical pretreatment before refining was executed with the addition of papermaking addiditives to find synergistic effects on fiber property improvement. Three fiber furnishes (SwBKP, KOCC, and BCTMP), and five different additives (CMC, CPAM, PEO, NaOH, $Na_2O_2$) were used. It was confirmed again that fiber mechanical pretreatment using Hobart mixer was a special way to modify fiber properties, where fiber WRV (water retention value) increases without losing fiber length. For SwBKP, addition of small amount of CMC (0.2％ OD basis), and for KOCC, PEO (0.2％ OD basis) caused additional significant improvement of the fiber furnish properties, respectively. Other additives did not cause adverse effects on the mechanical pretreatment, or better. For BCTMP, NaOH addition followed by mechanical pretreatment caused more than 20％ improvement in tensile and tear strength simultaneously, compared to the control. The yellowing caused by the treatment of NaOH on BCTMP could be minimized by using $Na_2O_2$ without losing the positive effect of NaOH.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.7-14
• /
• 1998

It is well known that the recycling of pulp generates a lot of fines, and cause the hornification of fiber. Both phenomena have been contributed to a limited use of recycled fiber. Among several means which can improve the properties of recycled fiber, enzymatic treatments are considered as an effective means. Thus the effects of xylanase on the properties of recycled pulp were investigated in this study Xylanase treatment showed some refining effect at a small dosage while the fines and fibrils were reduced at higher dosage as shown in the treatment with cellulase-hemicellulase. The interesting finding is that the WRV of recycled fiber treated with xylanase was higher than that treated with the mixture of cellulase and hemicellulase. Breaking length and tear index of recycled fiber treated with xylanase were also higher.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.41-47
• /
• 2000

The objective of this study is to assess the possibility of ozone as an environmentally friendly new deinking alternative for conventional deinking method. It is well known that the white ledger is very difficult to deink because the toner ink has the peculiar shape and size. Ozonization could remove the ink particles above 300 microns and thus improved the ink removal efficiency. Ozonization also improved the WRV of recycled fiber and apparent density, scott bond strength , breaking length, double fold and tear index. Thus, we believe that ozonization could be used as a deinking means of white ledger instead of the convention미 deinking method.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.13-23
• /
• 1998

Two major cellulase components purified with sephadex G-75 and DEAE sepharose were applied to bleached kraft pulp to inverstigate the change of fiber properties. Cellulose viscosity was very sensitive to $C_x$ component treatment (more than 15% drop was observed) while being little influenced by $C_1$, component (only 2% drop). Fiber fraction longer than 2mm was reduced by $C_x$ treatment while short fiber fraction was increased greatly by more than 15%. There was little change in fiber length distribution by combined treatment of $C_1$ 1 and $C_x$ at equal. In this case, fine contents increased by more than 2.5% at equivalent refining time. WRV and Density were increased as the amount of $C_1$ or $C_x$ treatment was increased. $C_{x}$ was main cause for increasing them. But the effect fell as enzyme dosage.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.327-338
• /
• 2011

This study was carried in order to manufacture the high quality coated paper. High quality includes not only properties of coated paper but also final print quality. In this study, new acrylic-styrene emulsion was polymerized in laboratory and compared with styrene-butadiene latex. Low-shear viscosity of coating color was decreased with increasing acrylic-emulsion dosage. WRV was increased with addition and decreased with substitution of acrylic-emulsion. Paper gloss, brightness and whiteness were increased and PPS and opacity was slightly decreased with acrylic-emulsion. Ink gloss was increased with using No. 3 acrylic-emulsion due to lower ink setting properties. However No.1, 2 emulsion shows opposite situation. Surface strength of coated paper was increased with using No. 3 acrylic-emulsion These results indicate that high quality coated paper can be manufactured with using No. 3 acrylic-emulsion.