• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.16-21
• /
• 2014

Recently Korea and many countries are legislated for pedestrian protection as following the GTR(Global Technical Regulation). Most NCAP organization have been applying pedestrian protection results in their own rating system in individual or overall rating. Euro NCAP agency has been introduced it first. From the beginning, Euro NCAP had assessed occupant and pedestrian protection. It has become to strengthen a pedestrian protection protocol every time published. Korea NCAP also has been rating pedestrian protection with overall rating system. This paper proposed to study new pedestrian protection protocol especially upper leg in order to find injury response based on physical test. On Euro NCAP, the upper leg injury are assessed two kind of value which are bending moment and force.

• International Journal of Advanced Culture Technology
• /
• v.12 no.3
• /
• pp.80-87
• /
• 2024

The aims of this study were to introduce cultural teaching procedures and propose cultural comparison activities as a practical method of cultural learning. It also analyzed learners' attitudes toward cultural learning through the aforementioned activities and examined considerations for holding cultural classes in the future. The research involved conducting a class underlain by four stages: warm-up, a cultural item comparison activity, wrap-up, and opinion submission. Data were collected through self-opinion journals and open-ended questionnaires, after which they were qualitatively analyzed. The results showed that the learners were highly satisfied with cultural learning through cultural comparison activities (73.7%) because of the efficiency of such a learning method, opportunities for proactive learning through interaction, increased interest and motivation, and the fact that it helps them understand their own cultures. We need to develop activities that enable learners to participate in a variety of ways through the mutual exchange of opinions when planning cultural classes. Pedagogical implications for integrated language and cultural classes are provided.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.341-347
• /
• 1998

To develop simple and accurate analytical method for freezing time prediction of beef and tylose under various freezing conditions, freezing time (Y) was regressed against the reciprocal $(X_3)$ of difference of initial freezing point and freezing medium temperature, reciprocal $(X_4)$ of surface heat transfer coefficient, the initial temperature $(X_1)$ and thickness $(X_2)$ of samples which should cover most situations arising in frozen food industry. As results of the multiple regression analysis, equations were obtained as follows. $Y_{tylose}=3.45X_1+7642.84X_2+4642.67X_3+2946.89X_4-431.33\;(R^2=0.9568)$ and $Y_{beef}=0.68X_1+7568.98X_2+2430.78X_3+3293.26X_4-299.00\;(R^2=0.9897)$. These equations offered better results than Plank, Nagaoka and Pham's models, shown in satisfactory agreement with models of Cleland & Earle and Hung & Thompson when were compared to previous models, and the accuracy of its was very high as average absolute difference of about 10% in the difference between the fitted and experimental results. Also, thermal diffusivities of beef and tylose were measured as $4.43{\times}10^{-4}m^2/hr$ and $4.39{\times}10^{-4}m^2/hr$ at $6{\sim}7^{\circ}C$, $2.42{\times}10^{-3}m^2/hr$ and $3.32{\times}10^{-3}m^2/hr$ at $-10{\sim}-12^{\circ}C$. Initial freezing points of beef and tylose were $-1.2^{\circ}C\;and\;-0.6^{\circ}C$, respectively. Surface heat transfer coefficients were estimated $20.57\;W/m^2^{\circ}C$ with no-packing, $16.11\;W/m^2^{\circ}C$ with wrap packing and $13.07\;W/m^2^{\circ}C$ with Al-foil packing, and the cooling rate of immersion freezing method was about 10 times faster than that of air blast freezing method.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.240-246
• /
• 2007

To evaluated the effect of low temperature storage on quality of fresh shoot of Sedum sermentosum, weight loss, Hunter L, a and b value, chlorophyll, water content, and general appearance were investigated during storage at 20, 10, and $5^{\circ}C$. Just after harvesting, fresh shoots ($10{\pm}2cm$ length) were stored with wrap film (linear LDPE)-packaged condition using the Styrofoam dish ($20{\times}10cm$, which 40 fresh shoots per dish). The fresh weight of 40 shoots was gradually decreased according to days after storage and higher storage temperature. The weight loss of fresh shoots showed significant difference (8.7-25.3%) between just before storage and 10 days after storage, and the degree of weight loss was more severer in higher storage temperature. Wanju local strain showed the lowest weight loss, and the most severe case was Pohang local strain. SPAD value related to chlorophyll content was rapidly decreased after 4 and 6 days at 20 and $10^{\circ}C$ storage, respectively. It was slowly decreased according to days after storage at $5^{\circ}C$. Yellowish color in bottom leaves of shoot appeared after 4, 6 and 8 days at 20, 10, and $5^{\circ}C$ storages, respectively. Hunter L and a values were gradually increased after storage, and it showed significant difference between just before storage and 10 days after storage. The total rate of discoloration over 50% or decay shoot was largely increased as higher temperature. It was significantly correlated to the water content of fresh shoot among local strains $(P{\leq}0.01)$. The freshness of shoot after storage was maintained in order of Wanji, Gunsan, Wando and Pohang local strain. The results indicated that the freshness was maintained for 8 days after $5^{\circ}C$ storage, when the fresh shoot was stored with wrap film-packaged condition.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.395-406
• /
• 2007

The twenty seven wrap-up vegetables (13 Compositae, 14 Brassicaceae) and seven herbs (6 Labiatae, 1 Umbelliferae) were cultivated with a deep flow technique (DFT) hydroponic beds and treated with 3 levels of nutrient solution concentrations of 1.2, 2.4, and $3.6dS{\cdot}m^{-1}$ in summer and autumn season. The pH and electrical conductivity (EC) change of nutrient solution, fresh weight, and mineral contents of plants were investigated. The pH was maintained lower in high electrical conductivity (EC) treatment and in summer than autumn. EC of nutrient solution in EC $3.6dS{\cdot}m^{-1}$ treatment increased up to $4.8dS{\cdot}m^{-1}$ during the growing period in summer season. The growth of tested plants showed high variations by plant species and nutrient solution concentrations. The coefficient variation (CV) of the shoot fresh weight of plants was higher in summer than autumn. The growth of Compostiae and herbs was better at EC $1.2dS{\cdot}m^{-1}$, and 14 Brassicaceae was better at EC $2.4dS{\cdot}m^{-1}$ in summer. In autumn, the growth was better at EC $2.4dS{\cdot}m^{-1}$ in all plants except kale 'TBC F1' and red rape 'honchaetae'. In mineral contents, total nitrogen and potassium were higher in autumn than summer. Total nitrogen, potassium, calcium, magnesium were higher in Brassicaceae than others. Iron and manganese, however, were higher in Compositae. As the results, this study suggests that mixed planting of 27 wrap-up vegetables and 7 herbs in DFT hydroponics in two seasons was possible and EC $1.2dS{\cdot}m^{-1}$ in summer and EC $2.4dS{\cdot}m^{-1}$ in autumn be recommended as for the nutrient solution concentration to produce them safely year round.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.463-471
• /
• 2008

This study investigated the clinical effectiveness and safety of sealed bleaching compared to conventional in-office bleaching using a randomized clinical trial of split arch design. Ten participants received a chairside bleaching treatment on the upper anterior teeth, and each side was randomly designated as sealed or control side. A mixture of Brite powder (PacDent, Walnut, USA), 3% hydrogen peroxide and carbamide peroxide (KoolWhite, PacDent, Walnut, USA) were used as bleaching agent. The control side was unwrapped and the experimental side was covered with a linear low density polyethylene (LLDPE) wrap for sealed bleaching. The bleaching gel was light activated for 1 hour. The tooth shades were evaluated before treatment, after treatment, and at one week check up by means of a visual shade (VS) assessment using a value oriented shade guide and a computer assisted shade assessment using a spectrophotometer (SP). The data were analyzed by paired t-test. In the control and sealed groups, the visual shade scores after bleaching treatment and at check up showed statistically significant difference from the preoperative shade scores (p<.05). The shade scores of the sealed group were significantly lighter than the control immediately after bleaching and at the check-up appointment (p<0.05). Compared to prebleaching status, the ${\Delta}E$ values at post bleaching condition were $4.35{\pm}1.38\;and\;5.08{\pm}1.34$ for the control and sealed groups, respectively. The ${\Delta}E$ values at check up were $3.73{\pm}1.95\;and\;4.38{\pm}2.08$ for the control and sealed groups. ${\Delta}E$ values were greater for the sealed group both after bleaching (p<.05) and at check up (p<.05). In conclusion, both ${\Delta}E$ and shade score changes were greater for the sealed bleaching group than the conventional bleaching group, effectively demonstrating the improvement of effectiveness through sealing.

• Archives of Reconstructive Microsurgery
• /
• v.10 no.2
• /
• pp.143-148
• /
• 2001

The hand with amputation of all fingers is useless for activities of daily living and traumatic amputation of some of the fingers can result in the diminished ability to perform power grip and precision grip which is vital to maintain normal function of the hand. Precision grip is used to hold an object between the opposable thumb and flexed fingers. In power grip the object is held between the flexed fingers and the palm while the thumb applies the necessary counterpressure to maintain the grip on the object. A 35 year old male lost his right all fingers including thumb at the level of proximal phalanx from the pressure machinary accident. Thumb was reconstructed using wrap around flap and the second and third fingers were reconstructed using the second and third toe transplantation. Seven years after reconstruction, he uses the reconstructed thumb and the second and the third fingers for eating meals, writing down a paper with a pencil and putting on socks.

• Journal of Fashion Business
• /
• v.3 no.2
• /
• pp.85-90
• /
• 1999

A shroud is clothes for giving a dead person a bath and being finely dressed:though our routine clothes have been western, putting on a shroud has been kept comparatively well as a tradition of a conventional ceremony garments. This study is about the current using of dressing a shroud, and for presenting foundations of a way about dressing a shroud in order to make the most of this by everyone, therefore this research will be worthwhile to preserve the traditional custom of giving a dead person a bath and being finely dressed. 1. We must confirm the death of a person before we do Su-Si for controlling rightly a corse. Su-Si is ways of changing a clean clothes after bathing the dead person, tieing up hands, feet and ankles with a string, filling up a mouth, a nose and ears with a wad of cotton, laying down the dead person with his head toward east, and setting up a screen after covering the dead person with a bed sheet. 2. Here are processes of putting on a shroud. After the day of death, first of all, you must untie the string to control rightly a corpse, take off the clothes, and give a dead man a bath. You trim the dead person's fingernails and toenails, put them in O-nang, then put his hands and feet in five pouches, finally put feet in korean socks and wrap with Ak-su. You put a underwear in a overwear in order to put on the clothes easily, and then put on an upper garments after putting on trousers. And put on Sb-sin After you wash the dead person's face and his hair, you put gems and raw rice in his mouth, wrap head with cotton fabrics, and put hairs into five pouches, then put on a headgear which is filled with five pouches. 3. You tie up with hem cloth the dead person dressed a shroud after wrapping with Dae-ryum-km and So-ryumkm. 4. After you encoffin the dead person, you weave coffin strings with cotton fabrics in order to lift up the coffin easily, and lay down a red fabrics having white letters about the dead person's name or social position onto the coffin, then cover the coffin with a coffin cover : finally you leave the coffin at the former place and set up screen.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.333-341
• /
• 2001

The actual overall migration data obtained from plastic food packaging materials into food simulants under high temperature testing conditions as described in the regulations of European Union, USA, and Korea or Japan were compared. Overall migration values(OMVs) with non-fatty food simulants under high temperature conditions were observed to be generally below 2.5 mg/dm$^2$ except polyamides(CPA and PA 6,6) which were tested at 121$^{\circ}C$ for 2 hrs. As for the fatty food simulants, the OMVs with soybean oil were higher than other simulants. Among the films tested, PVC wrap showed higher OMVs ranging between 23.9 and 54.6 mg/dm$^2$than others. The OMVs were measured at higher level with the elevation of contact temperature and the extension of contact time, and in fatty food simulants rather than in non-fatty simulants. Under similar testing temperature and time conditions. the OMVs tended to be increased in polar films like PA with polar simulants, and contrarily in non-polar films like PO with non-polar simulants. It is noteworthy that a discrepancy with regard to the result of OMVs was observed for some films as a result of different migration testing methods and conditions of each country areas.

• 대한공업교육학회지
• /
• v.40 no.1
• /
• pp.105-120
• /
• 2015

The purpose of this study was to extract of Sub-elements of technological communication skills and to construct of a system model. In order to achieve the goal of the study, it was carried out in two steps: (1)Extraction sub-elements and definitions of technological communication skills, (2)Development of a system model of technological communication skills. Obtained conclusions by the process of this research were as follows. First, sub-elements of the technological communication skills were extracted and they were images, sketches, flowcharts, drawings, prototyping, symbols tables graphs and presentations. Second, using the 'technological communication tools' based on the "collaborative activities in online and offline', technological communication skills were defined as communication skills to be raised through the process of 'Idea through the Communication', 'Realization through the Communication', 'Wrap up through the Communication'. Third, technological communication skills were described as the system, in which 'Idea through the Communication(images, sketches, flowcharts)', 'Realization through the Communication(design, prototyping)', 'Wrap up through the Communication(symbol table graph, presentation)' were collaboratively activated. Fourth, checking tool for the technological communication skills was developed, based on checking tool for the existing communication skills and system model for technological communication skills. And it was improved by the expert validity test.