• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.516-526
• /
• 2007

Wireless mesh network is not only WLAN technology but it says core technology for implementation of ubiquitous network and we have to application on a various field through connection with the sensor network. However, there are limited to 100mW in the maximum power because WLAN is used into transmission frequency band to ISM band. The mesh network based on WLAN is essential study for a long distance transmission in the limited maximum power that it is doing to cost-efficient network of backbone. Therefore, in this paper, we have presented an conquerable method to limitation of reaching distance of wireless mesh network and made several experiments to presentation the proposed method. The results show that it is possible to rise a long distance transmission and power efficiency into application of various antenna and function definition and implementation of device driver.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.763-768
• /
• 2015

In this paper, a microstrip patch antenna with arrow and ribbon shape for WLAN was designed and manufactured. The antenna was designed on a FR-4 substrate that has a thickness of 0.8mm and a dielectric constant of 4.4. The substrate size is $50{\times}40mm^2$. A commercially available tool was used for simulation to get the optimized parameters and the optimized values were obtained by finding the parameters that act sensitively to the performance of the antenna. The proposed antenna was produced using the optimized values, and characteristics of return loss, gain and radiation pattern in WLAN bands were measured.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2004

In this paper we apply block turbo coding at the transmitter and iterative decoding algorithm at the receiver for different operating modes, based on the 5 ㎓ IEEE 802.1 la WLAN system, instead of convolutional coding and soft decision viterbi algorithm to improve forward error correcting performance. Experimental results showed that each coding scheme outperforms coding gains of up to 3.5 ㏈ at the BER of 10$\^$-3/.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.533-538
• /
• 2018

For WLAN dual-band operation, a modified Yagi dipole antenna is presented. The modified dipole antenna consists of a dipole antenna with open sleeves and parasitic elements. The parasitic elements are used for the practical application of the radiation patterns and high-gain operation at the WLAN dual band. The experimental results showed that the achieved impedance bandwidths were 320 MHz (2.4 to 2.72 GHz) and 640 MHz (5.04 to 5.68 GHz), respectively. The measured maximum gain at the two WLAN bands was 7.74 dBi and 6.93 dBi, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.827-834
• /
• 2014

In this paper, a triple-band U-shaped monopole antenna with T-shaped stub for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of U-shaped of radiating patch, T-shaped strip in U-shaped, for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.341-348
• /
• 2018

A WLAN dual band dipole antenna with parasitic elements and a reflector is presented for high gain operation. The parasitic elements are used for practical application and high gain operation of the radiation pattern at the WLAN dual band. The proposed antenna consists of three layers, and has dimensions of $74mm{\times}40 mm{\times}31.4mm$. From the experimental results, the achieved impedance bandwidths were 1035 MHz (2.031-3.066 GHz) and 1119 MHz (5.008-6.127 GHz), respectively. The measured maximum gain at each WLAN band was 6.69 dBi and 7.81 dBi, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.745-750
• /
• 2018

A Slot array antenna with a phase reversal device is presented for WLAN operation. The array factor and radiation characteristics of the antenna are investigated. For practical application of the radiation pattern, the phase reversal device is used. The antenna is formed on both sides of the substrate ($30mm{\times}96mm{\times}0.2mm$). The measured results show that the proposed antenna has a 10 dB return loss bandwidth of 156 MHz (2.392 - 2.548 GHz) and the measured maximum gain was 8.31 dBi.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.765-771
• /
• 2015

In this paper, a dual-band arc-shaped monopole antenna for WLAN(Wireless Local Area Networks) applications. The proposed antenna is based on CPW-fed structure, and composed of two-arc shaped of radiating patch and ground plane. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator (HFSS) and found the parameters that greatly effect antenna characteristics. Using optimal parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the propnosed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN bands. And measured results of gain and radiation patterns characteristics displayed determined for opeating bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.153-160
• /
• 2009

A hierarchical network between Mobile-WiMAX and WLAN systems is to make it possible to utilize wireless internet services including time sensitive applications such as VoIP, VOD, visual telephony etc. During the process of vertical handoff decision from Mobile-WiMAX to WLAN hotspot, vertical handoff delay causes user dissatisfaction because it doesn't provide the seamless wireless internet service. We make use of type of service (ToS) parameters in IEEE 802.16e specification as the criterion parameter of vertical handoff decision process in hierarchical Mobile-WiMAX/WLAN networks. In this paper, we propose the process of vertical handoff decision for seamless wireless internet service which is sensitive to time delay. If type of service is time sensitive application, the decision of vertical handoff is withdrawn until the service is terminated. In focus on user satisfaction, if the proposed traffic management strategy in hierarchical Mobile-WiMAX/WLAN networks is used, user will utilize seamless wireless internet services including time sensitive applications.

• Journal of electromagnetic engineering and science
• /
• v.4 no.3
• /
• pp.124-127
• /
• 2004

A novel printed inverted-F antenna for dual-band WLAN is presented. The proposed design is based on the folded quarter-wave antennas, which have a conductor plate having two arms. An extremely thin prototype antenna is fabricated according to the simulation result. The obtained antenna can perform in IEEE802.11a, b(2.4～2.484 GHz and 5.15～5.35 GHz bands) and be adopted for laptop applications. All the measurements are performed in the actual test fixture.