• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.760-770
• /
• 2011

The existing mobility management schemes do not fully support the next generation network, which is composed of IP-based core network and various access networks. Currently, ETRI has been developing the AIMS (Access Independent Mobility Service) system which satisfies the ITU-T requirements of mobility management in the next generation network. The AIMS system is designed to provide a mobile host with a fast and reliable mobility service among heterogeneous access networks. Recently, many user devices have multiple communication interfaces, e.g., 3G and WLAN, and thus they can make two or more network connections at the same time. In this paper, we design a scheme of flow mobility, i.e., the movement of selected data flows from one access technology to another, to be applied in the AIMS system, and verify the proposed scheme through the NS-3 simulation study. From the simulation results, we can know that the proposed flow mobility scheme can utilize the network resource efficiently in the heterogeneous mobile networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.623-631
• /
• 2013

Wireless LAN (WLAN) interface is one of the major sources drastically depleting the battery power of mobile devices such as smartphones and tablets. Most commercial mobile devices employ a power saving technique putting their WLAN interface into a sleep state when there is no network traffic, and thereby, save the battery power. However, since an access point (AP) just transmits the packet(s) received from a server to the corresponding mobile device immediately, it may cause a problem that the mobile device constantly remains in an awake state so that its battery power is rapidly drained. In this paper, we point out this problem and propose a new scheme that can save the mobile device's battery power with an adaptive packet scheduling at the AP side. From the experimental results based on a testbed, we found that the proposed scheme outperforms existing schemes over 50% in terms of power saving.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.632-640
• /
• 2013

In this paper, we proposed a system in a wireless LAN environment in case of security threats, the mobile terminal and the remote server-based WLAN security. The security of the wireless LAN environment in the recent technology in a variety of ways have been proposed and many products are being launched such as WIPS and DLP. However, these products are expensive and difficult to manage so very difficult to use in small businesses. Therefore, in this paper, we propose a security system, wireless LAN-based terminal and a remote server using whitelist according to development BYOD market and smartphone hardware. The proposed system that AP and personal device information to be stored on the server by an administrator and Application installed on a personal device alone, it has the advantage that can be Applicationlied to a variety of wireless network environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.102-110
• /
• 2012

ZigBee networks developed for low power and short range communication are being used as home network solution for ubiquitous computing. However, as smart phones and tablet PCs have been widely used, WLANs which use same frequency with ZigBee networks have been increasingly used. Therefore, radio frequency interference causes many problems. To solve radio frequency interference problem among ZigBee networks and WLANs, many researches focus on designing interference minimization schemes in ZigBee networks. However, existing schemes have problems that have waste of resource for detecting interference, and have unnecessary time to avoid interference. In this paper, we propose an interference minimization scheme to solve radio frequency interference in ZigBee networks. The proposed scheme detects interference using ACK mechanism to reduce waste of resource, and avoids interference using table driven channel hopping scheme which is faster than existed schemes. The performance of proposed interference minimization scheme is evaluated by using OPNET simulator. Through the simulation result, we prove that proposed scheme has faster channel hopping than existing schemes.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.43-55
• /
• 2014

SPDY is the new protocol proposed by Google to complement problems of HTTP(Hypertext Transfer Protocol)/1.1 and to improve web speed. In this paper, we evaluated the performance of SPDY protocol in a variety environment. By this evaluation, we examined the characteristics of the SPDY protocol and compared the differences between the existing protocol and SPDY protocol. And we took a closer look at the Flow Control of SPDY. Through this, we analyzed the problem of SPDY. It improved performance at 3G network environment, but failed to improve performance at high speed WLAN and mobility environments. We also verified that Flow Control does not work well. And finally we proposed directions for improvement of this protocol.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.817-820
• /
• 2018

In this letter, a compact multiple-input multiple-output(MIMO) antenna design for a 2.4 GHz wireless local area network(WLAN) band is proposed for use in smart glasses. To miniaturize the MIMO antenna system, a ground plane is employed within the antenna and a T-shaped ground is proposed. To achieve wideband isolation, dual resonance is formed by the ground mode. One resonance is created by the T-shaped ground and the second resonance is created by adding a slot and a capacitor between the two feed lines. The measurements show that the reflection coefficient characteristic was less than -5.1 dB, whereas the isolation obtained was less than -20 dB. The diversity performance was evaluated using the measured two-dimensional radiation patterns, and the envelope correlation coefficient(ECC) values achieved in the target band(2.4~2.5 GHz) were less than 0.1.

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.773-780
• /
• 2012

ZOR(zeroth order resonance) antenna for 2.45GHz WLAN(wireless local area network) is designed by use of CRLH-TL(composite right left handed transmission line) meta-material. The electrical length of conventional antennas is determined generally according to the resonant frequency, whereas that of ZOR antenna can be determined without reference to the resonant frequency. Therefore ZOR antenna has advantage in miniaturization of antenna in comparison with conventional antennas. In order to design such ZOR antenna, first unit cell with electrical length shorter than a quarter wavelength at 2.45GHz is designed to the some characteristics of homogeneous medium. In order to decrease resonant frequency and enhance frequency bandwidth, the proposed antenna is fed by CPW(co-planar waveguide) and short stub between radiation patch and ground plane is used for obtaining both higher inductance and smaller capacitance than previous mush-room type of CRLH-TL.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1057-1069
• /
• 2017

The applications of Wireless Sensor Networks (WSN) are progressively adopting for various smart home services such as home automation, controlling smart home household appliances, constrained application services in a smart home, etc. However, enabling a seamless and ubiquitous WSN communication between the smart home appliances is still a challenging job. Therefore, in this paper, we propose a smart home control system using an Actuator based ZigBee networking (AZNET). The working of the proposed system is further divided into three phases, 1) an interference avoidance system is adopted to mitigate the effect of interference caused due to the co-existence of IEEE 802.11x based wireless local area networks (WLAN) and WSN, 2) a sensor-based smart light control system is used to fulfill the light requirement in the smart home using the sunlight with light source, and 3) an autonomous home management system is used to regulate the usage time of the electronic appliances in the smart home. The smart is tested in real time environment to use the sunlight with light sources in a various time of the day. Similarly, the performance of the proposed smart home is verified through simulation using C# programming language. The results and analysis revealed that the proposed smart home is less affected by the interference and efficient in reducing the energy consumption of the appliances available in the smart home scenario.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.418-423
• /
• 2009

Unlike domestic railway transportation system in which majority of station are equipped with gate access controller and ticket office, it has been a very common practice in overseas railway transit or railway station that they use a pressure door mat, infrared-sensors or CCTV cameras so as to automatically determine the number of passenger onboard and alight and to reflect the information to their business (i.e., deployment of vehicles and human resources). The data collected by the automatic passenger counting (APC) system provides methods how to obtain the information about the number of passenger using the vehicles on the basis of date, time and stop(station) which enables large-scaled transit company to create profits through effective vehicle deployment and management of their employees. This paper addresses the basic features of the automatic passenger counting system using infrared sensor and describes those of the extended APC system in conjunction with wireless technologies such as GPS, WLAN or Cellular network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.751-759
• /
• 2009

Due to the advance of WLAN technology, the use of the multimedia service such as the video streaming service has been increased in the home network. However, we need to study the method which decreases the transmission delay and the frame loss rate to provide QoS of the video streaming service. Therefore, this paper proposes an active buffer management mechanism to guarantee QoS of the streaming service in IEEE 802.11e EDCA. The proposed protocol discards the frame in the HoL of the buffer based on the importance of each frame and the virtual transmission delay of frame newly arriving at the buffer. In the simulation results, the proposed algorithm not only decreases the frame loss probability of important I and P frames but also stabilizes the transmission delay. It may increase the QoS of video streaming services.