• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.185-196
• /
• 2012

The fish community within the lake and 5 tributaries of Lake Chungju in spring and autumn, 2009 was surveyed. In this study, the total 128,506 individuals were collected belonging to 11 families 29 genera 34 species. The most dominant species was Squalidus japonicus coreanus that account for 91.6% of population and 49% of biomass of fish community. In the point of population, dominant species were small-sized species, which became the prey of big-sized predatory species. In the point of biomass, dominant species were predatory species which were large-sized. The most dominant species in lacustrine area was S. japonicus coreanus which accounted for 92.2% of total population and 49.1% of total biomass. The most dominant species of tributary streams was Tridentiger brevispinis which accounted for 66.4% of total population and 55.1% of total biomass. The site of C3 in lacustrine area and Dongdal-cheon in tributary streams collected the most number of species. Through ecological health evaluation of five tributary streams using 8 metric index of biological integrity (IBI) model, two streams (Dongdal-cheon, Kwang-cheon were evaluated as, "B", "good" condition, and Jangsung-cheon obtained grade C indicating "Fair" condition, Jecheon-cheon obtained grade D indicating "Poor" condition based on IBI model. Lepomis macrochirus which was designated as a domestic ecosystem-disturbing alien species with wide food niche have shown tendency to increase the number of individuals since 1991 indicating the adverse effect on not only fish community but also aquatic ecosystem food web of Lake Chungju.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.357-365
• /
• 2011

The current trends in steel construction intend to use tapered sections to minimize as much as possible the use of excess material. This can be done by choosing the cross-sections to be as economical as possible, leaving the classical approach of using prismatic members. In addition, it is important to predict the buckling behavior of tapered member with large depth-to-thickness ratio in order to prevent the collapse of PEB system subjected to overloads. An experimental investigation of buckling behavior of tapered beam was presented. The primary test parameter was depth-to-thickness ratio and taper ratio. Using initial stiffness and load-carrying capacity proposed by current provision, the simple plastic hinge method using modified Yoda's model and finite element analysis, the prediction of a moment-rotation curve of linearly tapered member was presented. Moreover, comparisons between analytical and experimental data for moment-rotation curves were accomplished.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.51-55
• /
• 2007

As for satellite programs, the multipurpose satellite 1(KOMPSAT-1) was successfully launched on Dec. 21, 1999 and operated for three years. It is still properly operated even though its life cycle was ended. The development of KOMPSAT-2 (Korea Multipurpose Satellite-2) is near completion and the development of KOMPSAT-3, KOMPSAT-5 and COMS (Communication, Ocean, Meterological Satellite) are proceeding swiftly. In KORDI(Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI(Geostationary Ocean Color Imager) instrument which is loaded on COMS(Communication, Ocean and Meteorological Satellite); it will be launched in 2000. Ansan(the headquarter of KORDD has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified antenna and RF. Antenna is designed to be ${\emptyset}$ 9m cassegrain antenna which has 19.35 $G/T(dB/^{\circ}K)$ at 1.67GHz, RF module, is divided into LNA(Low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem The existing building is re-designed and classified for the KOSC operation concept; computing room, board of electricity, data processing room, operation room Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet, and it is also being considered constructing outer data distribution system as a web hosting service for to offering received data to user under an hour.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.1-6
• /
• 2010

This study presents the practical design modification to improve the retracting performance of the pyro-typed high power pretensioner. 3 components of the pretensioner are redesigned and the usefulness of the design modification is verified by the experiment. During the pretensioning process, the gas blast generated from the gunpowder is transferred to the rack-pinion gear through the manifold. The rack-pinion gear is connected with the spool where the webbing is rolled up. According to the rotation of the pinion, the spool is turned and the webbing is winded. To help the gas blast flow well, the shape of the inner cross section of the manifold is changed. The spur gear design program is developed and used to find the best combination of the rack-pinion gear pair to increase the power transmission efficiency. The pinion guide is installed on the spool to prevent the vibration of the pinion. As a result of the experiment, the amount of the web retraction length is increased when every single design modification is applied. Therefore, the retracting performance of the pretensioner is considered to be improved if the presented design modifications are applied.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.1-8
• /
• 2013

High loading of printing and writing grades with fillers has many advantageous aspects in papermaking because it allows decreasing fiber use and reducing manufacturing cost. High loading technology, however, has some disadvantageous aspects as well. It decreases physical properties of papers, especially strength properties. The problem associated with high loading can be reduced by applying surface sizing starch solution onto paper surface. It is important to control the penetration of the surface sizing starch solution into paper web to obtain the desired property improvement. In this study, the effect of the addition of two polymers into starch solution on paper properties has been examined. PVOH and polyDADMAC were used as polymeric additives for surface sizing with oxidized starch. Viscosity of starch solutions and surface roughness of dried starch films on glass slides showed that some interactions between polymeric additives and oxidized starch have been occurred and the most extensive interaction with starch solution was obtained with high molecular weight polyDADMAC. Low molecular weight PVOH was most effective in improving folding endurance and internal bond strength. On the other hand, polymer addition showed no effect on surface strength of paper. This indicates that not the level of starch holdout but the bonding strength of starch itself has predominant influence on surface strength of paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.77-84
• /
• 2012

The lithographic process depends on a satisfactory ink-in-water emulsion being formed during printing and the speed of wet presses makes the choice of fountain solution vitally important as the ink and fount must react quickly to form a stable emulsion. Ink and water come into contact with each other on the rolls of the press and are forced together in the roll nips. The water is not soluble in the ink since it is slightly fat. Instead, an emulsion is formed, a heterogeneous mass consisting of small water drops mixed into the ink, if the water feed is too great. This emulsification can affect the properties of an off-set ink and negatively affect the printability. So we investigated the effects of the emulsification of phenol free heat-set ink and existing heat-set ink on printed quality, such as amount of ink transfer, printed density, print-through and uniformity. We used Duke emulsification tester for the emulsification of inks, and used IGT printability tester for printed quality. The printed quality were measured by densitometer and were evaluated by the image analysis system. Compared to conventional printing ink, phenol-free ink showed better results of the printability at the emulsification.

• The Journal of Pediatrics of Korean Medicine
• /
• v.22 no.1
• /
• pp.13-24
• /
• 2008

Objectives This study was designed to analyze the clinical studies on Mental retardation(MR) in traditional Chinese medicine(TCM). Methods For this study, we searched the clinical studies on MR, which had been published from 2003 to 2007, through web site CNKI(中國知識基礎設施工 http://www.cnki.net). There were 17 clinical studies and we focused on those studies. Results 1. In those Chinese studies, they used following words to describe Mental retardation; 小人弱智($xi\check{a}o\acute{e}rru\grave{o}zh\grave{i}$), 智能發育不全($zh\grave{i}n\acute{e}ngf\bar{a}y\grave{u}buqu\acute{a}n$), 智力低下($zh\grave{i}l\grave{i}d\bar{i}xi\grave{a}$), 精神發育遲滯($j\bar{i}ngsh\acute{e}f\bar{a}y\grave{u}ch\acute{i}zh\grave{i}$), 智能落后($zh\grave{i}n\acute{e}nglu\grave{o}h\grave{o}u$), 智能落后($zh\grave{i}n\acute{e}ngch\acute{i}hu\check{a}n$), 失天愚型患人($xi\bar{a}nti\bar{a}ny\acute{u}x\acute{i}nghu\grave{a}n'\acute{e}r$). 2. There were many kinds of TCM treatment methods for MR, such as herbal medicine, acupuncture, electroacupunture, acupoint injection, Chuna therapy, and special education. And those TCM treatments methods showed higher efficacies in the treatment of MR compared with Western medicine. 3. Mental retardation was related with the deficiency of heart, kidney, liver, spleen(心虛, 腎虛, 肝虛, 脾虛) and the pathological mechanism of Phlegm(絹) and Blood stasis(慫沂)in the studies about the Bian Zheng-the types of differential diagnosis- of MR. 4. Most of studies used Intelligence Quotient(IQ) to assess the efficacy of TCM treatment of MR. And the duration of treatment, the degree of illness, the age of patient, and the cause of illness affected the prognosis of MR. Conclusions These results suggest that traditional medicine could be one of the useful treatments on MR. And these results could be used in the clinical practices and studies on MR in Korea.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.46-51
• /
• 1990

Laser plasma was generated by a 1GW iodine photodissociation laser ($\lambda$=1.315$\mu\textrm{m}$, E=12.7J) whose output beam was focused on a molybdenum target surface. The experiment was conducted in a vacuum chamber under 1D-sTorr and several tens of laser shooting were necessary for sufficient exposure for the PBS resist of 111m thickness. Aluminium was coated on the top of the resist by 0.1$\mu\textrm{m}$ thickness which acts as an X-ray filter to cut off the visible and the ultraviolet lights. A bio-specimen was put directly on the aluminium coated resist and located at a distance of 3 cm from the X-ray source. The replicas of a steel mesh, spider's web. and a red blood cell were obtained by this technique and were observed by Nomarski microscope and SEM. The limitation of its resolution is determined by the X-ray source size and Fresnel diffraction effect, and its theoretical prediction is well matched with the experimental results. In this experiment, a resolution better than 0.1$\mu\textrm{m}$ could be obtained. ained.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.292-299
• /
• 2018

Objectives: The aim of the present study was to assess the frequency of use, and preferences regarding information and communication technologies (ICTs) among Ecuadorian patients with chronic kidney disease (CKD) undergoing hemodialysis. Methods: We conducted an anonymous cross-sectional survey-based study from January 2016 to April 2017, involving 393 patients with end-stage renal disease from 9 hemodialysis centers, in which they rated their use and preferences of various ICTs through a modified version of the Michigan Questionnaire. The questionnaire collected information regarding demographics, patients' interest in obtaining health-related information through ICTs, and interest in using ICTs as a potential way to communicate with their healthcare providers. A chi-square test for association and adjusted regression analyses were performed. Results: Among all patients who participated, 64.3% reported owning a cellphone, with less than a third reporting active Internet connection. The most used ICT for obtaining information about CKD and/or hemodialysis was web-based Internet, followed by YouTube. SMS was rated the highest to receive and seek health-related information, followed by Facebook. Younger age and higher levels of education were associated with a higher overall usage of ICTs. Finally, more than half of the patients reported interest in using WhatsApp for communicating with their healthcare providers. Conclusions: Understanding the preferences of ICTs among patients with CKD undergoing hemodialysis could help to improve their outcomes through the potential uses and benefits of ICTs. Further research is needed to assess their role in improving the care of patients with chronic diseases.

• Journal of Environmental Health Sciences
• /
• v.50 no.1
• /
• pp.43-53
• /
• 2024

Background: Exposure assessment is an important part of risk assessment for consumer products. Exposure models are used when estimating consumer exposures by considering exposure routes, subjects, and circumstances. These models differ based on their tiers, types, and target populations. Consequently, exposure estimates may vary between models. Objectives: This study aimed to compare the results of different exposure models using identical exposure factors. Methods: Chemical exposure from consumer products was calculated using four consumer exposure assessment models: Targeted Risk Assessment 3.1, Consumer Exposure Model 2.1 (CEM), ConsExpo web 1.1.1, and the Korean Exposure Algorithm (primary and detailed) issued by the Ministry of Environment, No. 972 (MOE). The same exposure factors were used in each model to calculate inhalation and dermal exposures to acetaldehyde, d-limonene, and naphthalene in all-purpose cleaners, leather coating sprays, and sealants. Results: In the results, TRA provided the highest estimate. Generally, MOE (detailed), CEM and ConsExpo showed lower exposures. The inhalation exposure for leather coating spray showed the largest differences between models, with differences reaching up to 1.2×10⁷ times. Since identical inputs were used for the calculations, it is likely that the models significantly influenced the estimated results. Conclusions: Despite using the same exposure factors to calculate dermal and inhalation exposures, the results varied substantially based on the model's exposure algorithm. Therefore, selecting an exposure model for assessing consumer products should be done with careful consideration.