• Title/Summary/Keyword: WDM System

Search Result 263, Processing Time 0.027 seconds

Multiple PON repeater/aggregator for the optimization of FTTH based access networks (FTTH 기반 가입자망 최적화를 위한 PON 다중 중계 장치)

  • Yoon, Ho-Sung;Kim, Chong-Ahn;Park, Jae-Hyoung;Kim, Jin-Hee
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2008.08a
    • /
    • pp.292-295
    • /
    • 2008
  • We propose a PON repeater system which transports multiple PON channels at the same time over the physical limit of the standard E-PON reach. To increase the physical reach up to 60km, we used the O-E-O (optic-electric-optic) signal regeneration on an active remote terminal which is placed between a central office and passive remote nodes. Also, by incorporating the well-established WDM technology to aggregate multiple E-PON channels, we successfully increased the split ratio (the number of subscribers per fiber core) to over 256.

  • PDF

Deposition of edge filters for optical communications using an optical thickness monitoring system (광학두께 감시기를 이용한 광통신용 경계 필터의 증착)

  • 우석훈;이상현;황보창권;문일춘;강건모
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.286-287
    • /
    • 2003
  • 최근 음성, 화상 및 동영상 등의 대용량 정보전송 요구에 따라 광 통신용 광학 박막의 필요성이 점차 증대되고 있으며, 특히 광통신에서 주로 사용되는 두 파장영역(1300nm/1500nm)을 분리하는 1300nm/1500nm 경계 필터는 WDM 양방향 광통신 시스템 등에 많이 응용 되고 있다. 광통신용 광학 박막은 보통 그 증착 두께가 일반 광학 박막에 비해 매우 두꺼우므로 증착 시 두께 조절의 어려움이 있을 수 있으며, 오랜 시간 증착 하는 동안 증착조건의 변화에 의해 증착물질의 광학상수의 변화 등 여러 가지 문제점들을 가질 수 있다. (중략)

  • PDF

L-band Power Enhancement through the reinsertion of backward ASE filtered by a C/L-band coupler

  • Kim Seung Taek;Gang Seong Bok;Jeong Hun;Lee Gyeong Gyun;Gang Hui Seok;Jo Yeong Jun
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.20-21
    • /
    • 2003
  • Erbium doped fiber (EDF) sources are useful devices for characterization of optical components for wavelength division multiplexing (WDM) fiber optic communication system. Therefore, there are many efforts to extend the bandwidth and to increase the power of the light source. Especially, L-band ASE source uses the low inversion state of EDF. It makes the power efficiency very low and needs a lot of fiber as several times as the fiber needed in C-band ASE generation. (omitted)

  • PDF

System Performance Depending on the Deviation of RDPS in Dispersion Managed Optical Transmission Link with Random Distribution of RDPS (RDPS 분포가 랜덤한 분산 제어 광 링크에서 RDPS 편차에 따른 시스템 성능)

  • Lee, Seong-Real
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.10a
    • /
    • pp.967-970
    • /
    • 2014
  • The compensation characteristics are investigated as a function of the deviation of residual dispersion per span (RDPS) in the optical transmission links with a randomly distributed RDPS and optical phase conjugation (OPC). The simulation results show that the effective launch power are more increased and the effective net residual dispersions (NRDs) are more increased, as the deviation of RDPS is more narrow.

  • PDF

On-site water level measurement method based on wavelength division multiplexing for harsh environments in nuclear power plants

  • Lee, Hoon-Keun;Choo, Jaeyul;Shin, Gangsig;Kim, Sung-Man
    • Nuclear Engineering and Technology
    • /
    • v.52 no.12
    • /
    • pp.2847-2851
    • /
    • 2020
  • A simple water level measurement method based on wavelength division multiplexing (WDM) is proposed and demonstrated. The measurement principle is based on the change of Fresnel reflection occurring at the end facet of the optical fiber tip (OFT). To increase the spatial resolution of water level sensing, a broadband light source (BLS) and an arrayed waveguide grating (AWG) are employed. The OFTs are multiplexed with the dedicated wavelength channels of AWG. By measuring all of the reflection powers reflected at the OFTs with a proposed on-site reflectometer, the water level can be monitored continuously for a fast emergency response. Moreover, it can be implemented easily with the commercially available optical components and devices with the simple configuration.

The Performance Evaluation of E-PON System for TPS (FTTH E-PON 시스템의 TPS 성능 평가)

  • Kwon, Jeong-Gook;You, Jae-Hoon;Kim, Bong-Tae;Lee, Sang-Ho
    • Journal of KIISE:Information Networking
    • /
    • v.36 no.4
    • /
    • pp.360-368
    • /
    • 2009
  • Recently, broadband access networks have been competitively deployed all over the world with the development of various multimedia services for such a network. ETRI(Electronics and Telecommunications Research Institute) built the FTTH(Fiber-To-the-Home) service center to develop a next-generation equipment and a high-quality service/platform as well as to promote domestic industry in the field of optical communication. The FTTH service center has a variety of test equipments such as FTTH standard testbed for a BMT(bench mark test), a network operation center, and IPTV service equipments. Also, ETRI deployed a new type of commercial optical access networks cooperating with ISP(Internet Service Provider). This paper presents the performance evaluation of FTTH E-PON(Ethernet Passive Optical Network) system as a platform for TPS(Triple Play Service) based on QoS(Quality of Service) and QoE(Quality of Expericence) issues. This FTTH E-PON system is successfully demonstrated as an optical access network system by commercial network service provider and the FTTH service center of ETRI.

Optical Design of an Integrated Two-Channel Optical Transmitter for an HDMI interface (광 HDMI 인터페이스용 2채널 광송신기 광학 설계)

  • Yoon, Hyun-Jae;Kang, Hyun-Seo
    • Korean Journal of Optics and Photonics
    • /
    • v.26 no.5
    • /
    • pp.269-274
    • /
    • 2015
  • In this paper we design the optical system for an integrated two-channel TO-type optical transmitter to apply the HDMI interface using the code V simulator. The proposed integrated two-channel optical transmitter has two VCSELs attached in parallel on an 8-pin TO-CAN package, on top of which is a lens filter block ($1mm{\times}2mm{\times}4mm$) composed of hemispherical lenses and WDM filters. Considering two-channel transmitters manufactured with wavelength combinations of 1060nm/1270nm and 1330nm/1550nm, we obtain the optimum value of the diameter of the hemispherical lens as 0.6 mm for both combinations, and the distances L between the lens filter block and ball lens as 1.7 mm and 2.0 mm for the 1060nm/1270nm and 1330nm/1550nm wavelength combinations, respectively. At this time, the focal length f0 of the lens filter blocks for wavelengths of 1060, 1270, 1330, and 1550 nm are 0.351, 0.354, 0.355, and 0.359 mm, respectively, and the focal lengths F of light passing through the lens filter block and ball lens are 0.62 mm for 1060nm/1270nm and 0.60-0.66 mm for 1330nm/1550nm wavelength combinations.

Characterization of amplified spontaneous emission light source from an $Er^{3+}$/$Tm^{3+}$co-doped silica fiber ($Er^{3+}$$Tm^{3+}$이 복합 첨가된 실리카 광섬유의 ASE 광원에 대한 특성 평가)

  • Jeong, Hoon;Oh, K.
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.96-97
    • /
    • 2000
  • Incoherent broadband optical sources have been applied in various areas such as a light source for optical device characterization, fiber-optic gyroscopes$^{(1)}$ , and spectrum sliced light source in wavelength division multiplexing (WDM) system$^{(2)}$ . To utilize the inherent low loss in silica optical fibers, various types of incoherent light sources are being developed. Among the light sources, the amplified spontaneous emission (ASE) from a rare earth doped fiber has benefits in temperature stability, high output power, low polarization dependence over semiconductor diodes$^{(3)}$ . Recently erbium doped fibers (EDF) have been intensively researched for ASE sources as well as optical amplifiers$^{(4)}$ . The spectrum of ASE from an EDF, however, is limited in the 1520~1560 nm range in conventional configurations. In this letter we described a new broadband ASE source which included both the conventional ASE band of Er$^{3+}$ ion, 1520nm~1560nm and ASE band from Tm$^{3+}$ ions that extends the bandwidth further. For the first time, to the best knowledge of authors, a fiber ASE source based on the energy transfer between Er$^{3+}$ and Tm$^{3+}$ ions in the range of 1460~1550 nm, has been demonstrated using a single 980nm pump laser diode. (omitted)omitted)

  • PDF

Fabrication and Evaluation of Thin Film Filter Type 4-Channel Wavelength Division Multiplexing Device (박막필터형 4- 채널 파장분할 다중화 소자의 제작 및 평가)

  • Park, Kyung Hyun;Seo, Wan Seok;Chung, Young Man;Park, Hee Gap;Ma, Dong Sung;Kang, Min Ho
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.24 no.3
    • /
    • pp.400-407
    • /
    • 1987
  • Thin film filter type 4-channel wavelength division multiplexing(WDM) device was designed and fabricated for the application in optical subscriber loop system. It has multi-mode fiber pigtails and four wavelength division consisting of 0.81, 0.89, 1.2 and 1.3 um. The evaluated performances are 1-2d B of insertion loss(connector loss excluded)and 30-35d B of crosstalk attenuation for all channels. The performance of the fabricated device was tested in the wideband optical transmission experiment, where the SNR degradation due to the crosstalk of the device was found to be within a measurement error.

  • PDF

A Study on the transducer development and multi-point signal and its directivity detection of FBG(Fiber Bragg Grating) hydrophone (FBG(Fiber Bragg Grating) 하이드로폰의 트랜스듀서 개발과 다중점 신호 검출 및 지향성에 관한 연구)

  • 김경복
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.9B
    • /
    • pp.1551-1562
    • /
    • 2000
  • In the using of FBG developed in home land, we designed and manufactured three types of FBG sound transducers the first in Korea. On FBG transducers manufactured we made an demonstrated on respective frequency response peculiarties in the water and analyzed the special characters. As the experimental result on frequency response peculiarities, we made t possible underwater acoustic detection on C type to maximum 18kHz, And for the purpose of realization on multi-point signal detection on wide scope in the water, in the using of WDM(Wavelength Division Multiplexing) method and passive band-pass filter system, established arrays system and succeeded in multi-point underwater acoustic signal detection to the frequency 1.3KHz out of the two B type FBG transducers. Additionally, it would be possible directivity detection for the objects of its source as the intensity of detection signal varies with the sound source's direction and angle. From now on we prepared a new moment on the practical used study on FBG hydrophone.

  • PDF