• Title/Summary/Keyword: WDM System

Search Result 263, Processing Time 0.023 seconds

Effective Net Residual Dispersion Depending on Total Transmission Length in Optical Transmission Links with a Randomly Distributed RDPS (RDPS가 랜덤하게 분포하는 분산 제어 광전송 링크에서 전체 전송 거리에 따른 유효 전체 잉여 분산)

  • Lee, Seong-Real
    • Journal of Advanced Navigation Technology
    • /
    • v.17 no.4
    • /
    • pp.413-420
    • /
    • 2013
  • The design rule depending on total transmission length is induced in the optical links with residual dispersion per span (RDPS) of the random distribution, which is adopted for implementing the flexible systems of wavelength division multiplexing (WDM) transmission with dispersion management (DM) and optical phase conjugation. DM parameters used for the analysis of the design rule are the effective net residual dispersion (NRD) and the effective launch power. It is confirmed that the flexible optical network configuration with the total transmission length lower than 1,000 km is possible, because the system performance difference between the randomly distribution and the uniform distribution of RDPS is small. And, in the optical links with the randomly distributed RDPS, the wide NRD can be applied for transmitting WDM channels of the relatively wide launch power.

Analysis of Transmission Characteristics for Cascaded WDM Optical Add / Drop Multiplexers with Crosstalk , ASE Noise , and Extinction Ratio (WDM 광 분기 / 결합 시스템에서의 누화 , ASE 잡음 , 소광비가 전송특성에 미치는 영향분석)

  • Lee, Sang-Rok;Seo, Wan-Seok;Lee, Sung-Un
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.2
    • /
    • pp.1-8
    • /
    • 1999
  • We analyze the transmission performance of WDM system based on cascaded optical add/drop multiplexers. The considered factors degrading the performance in this paper include the intra-channel corosstalk caused from space switches and demultiplexers/multiplexers, the amplified spontaneous emission noise, and the extinction ratio. To ensure the power penalty within 1dB, the extinction ration more than 13dB, the switch corosstalk less than 39dB, and the demultiplexer/multiplexer crosstalk less than 20dB are required. Under the assumption of switch corosstalk less than 30dB, performance degradation due to the ASE noise is dominant compared to the crosstalk. With the fixed decision threshold in an optical receiver, the maximum number of cascaded nodes reduces to a half compared to the case of the optimum decision threshold.

  • PDF

Compensation for Distorted WDM Signals Through Dispersion Managed Optical Transmission Links with Ununiform Distribution of SMF Length and RDPS of Optical Fiber Spans (중계 구간의 SMF 길이와 RDPS 분포가 일정하지 않은 분산 제어 광전송 링크를 통한 왜곡된 WDM 신호의 보상)

  • Lee, Seong-Real
    • Journal of Advanced Navigation Technology
    • /
    • v.16 no.5
    • /
    • pp.801-809
    • /
    • 2012
  • Dispersion management (DM) is the typical technique compensating for the distorted signals due to interaction of group velocity dispersion (GVD) and optical nonlinear effects for transmitting wavelength division multiplexed (WDM) channel with the excellent performance. Optimal net residual dispersion (NRD) and effective launching power range of optical transmission links with random distribution and artificial distribution of single mode fiber (SMF) length and residual dispersion per span (RDPS) required to flexibly design of optical links in DM. It is confirmed that optimal net residual dispersion (NRD) are +10 ps/nm and -10 ps/nm controlled by precompensation and postcompensation, respectively, in both of the considered distribution patterns of SMF length and RDPS. And, in optimal NRD, system performance in optical links with the descending distribution of SMF length and the ascending distribution of RDPS among the artificial distribution patterns are more improved, consequently, effective launching power range is expanded by almost 2 dB than those in optical links with the uniform distribution.

Dispersion-managed Links with the Irregular Distribution of the Lengths and Dispersion Coefficients of the SMFs and the DCFs (SMF와 DCF의 길이와 분산 계수가 불규칙하게 분포하는 분산 제어 링크)

  • Lee, Seong-Real
    • Journal of Advanced Navigation Technology
    • /
    • v.22 no.3
    • /
    • pp.240-245
    • /
    • 2018
  • A flexible dispersion-managed link configuration is proposed by using single-mode fibers (SMFs) and dispersion-compensating fibers (DCFs) with irregular dispersion coefficients and lengths over all fiber spans for compensating of WDM channels distortion due to the group velocity dispersion and nonlinear effects of optical fibers. The flexibility of link is enabled by artificially distributing of these fibers based on the dispersion coefficients of DCFs in each half transmission section. The simultaneous ascending and descending (AD) distribution of the DCF's coefficients before and after the optical phase conjugator, respectively, best compensates the distorted wavelength division multiplexed signals in the optical link. Therefore, to improve the compensation effect of the distorted WDM channels, AD distribution is needed to choice regardless of fiber lengths and the residual dispersion per span and fiber's dispersion coefficients.

Optimization of Net Residual Dispersion and Launching Power Depend on Total Transmission Length and Span Length in Optical Transmission Links with Dispersion Management and Optical Phase Conjugation (분산 제어와 광 위상 공액이 적용된 광전송 링크에서 총 전송 거리와 중계 간격에 따른 전체 잉여 분산과 입사 전력의 최적화)

  • Lee, Seong-Real
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.12B
    • /
    • pp.1433-1441
    • /
    • 2011
  • Design rules of optical transmission links with dispersion management (DM) and optical phase conjugation (OPC) for compensating optical signal distortion due to chromatic dispersion and self phase modulation (SPM) of single mode fiber (SMF) are investigated in this paper. Design rules consist of optimal net residual dispersion (NRD) and optimal range of launching power of wavelength division multiplexed (WDM) channels as a function of total transmission length and span length. In all considered total transmission length and span length, optimal NRD are obtained to +10 ps/nm and -10 ps/mn for transmission links, which is controlled by precompensation and postcompensation, respectively. It is confirmed that system performances are more improved and effective NRD for wide launching power have wider range as total transmission length and span length are more decreased.

Colorless Amplified WDM-PON Employing Broadband Light Source Seeded Optical Sources and Channel-by-Channel Dispersion Compensators for >100 km Reach

  • Kang, Byoung-Wook;Lee, Kwanil;Lee, Sang Bae;Kim, Chul Han
    • Journal of the Optical Society of Korea
    • /
    • v.18 no.5
    • /
    • pp.436-441
    • /
    • 2014
  • We have demonstrated an amplified wavelength-division multiplexed (WDM) passive optical network (PON) by using broadband light source (BLS) seeded optical sources and chirped fiber Bragg gratings (FBGs) based dispersion compensators. Chirped FBGs located at central office (CO) were fabricated and used as channel-by-channel dispersion compensators in order to mitigate the dispersion-induced distortion of both downstream and upstream signals. Owing to a low insertion loss of chirped FBG based dispersion compensator, the optical signal-to-noise ratio (OSNR) of the downstream signal could be improved to be ~28 dB. Thus, we re-confirmed that an error-free transmission of 1.25 Gb/s signals over a 100 km single-mode fiber (SMF) link could be achieved with a proposed amplified WDM-PON architecture. We have also evaluated the impact of various noises on the system's performance, and found that the low OSNR of the downstream signal would be a main limiting factor on the maximum reach of the proposed amplified WDM-PON architecture. From the measured ~13 dB improvement in OSNR of the downstream signal compared to our previously-proposed dispersion compensating module based scheme, we believe that the proposed architecture can accommodate a reach of longer than 100 km SMF link easily.

A study on the multi-point signal detection, using Passive band-pass filter in FBG Hydrophone (FBG(Fiber Bragg Grating) Hydrophone에서 Passive Band-Pass Filter를 사용한 다중점 신호 검출에 관한 연구)

  • Kim, Kyung-Bok;Kwack, Kea-Dal
    • Journal of Sensor Science and Technology
    • /
    • v.9 no.4
    • /
    • pp.307-315
    • /
    • 2000
  • To set up the arrays system of FBG(Fiber Bragg Grating) Hydrophone sensor and realize the multi-point signal detection for the wide scope underwater, using WDM(Wavelength Division Multiplexing) method and Passive band-pass filter system, underwater acoustic signal detection of the newly designed two FBG Transducers is successfully experimented. As a result of the experiment, it was possible each signal with different frequent signals is detected for the multi-point up to 1.3KHz in underwater. We can, therefore, prove the possibility on the system design of Hydrophone sensor arrays, using the newly made FBG Transducers.

  • PDF

Optical Switching Architectures using WDM for High-Speed ATM Networks (고속 ATM망을 위한 파장 분할 광교환기 구조)

  • So, W.H.;Lee, C.H.;Kim, Y.S.;Kim, Y.C.
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.8
    • /
    • pp.12-20
    • /
    • 1998
  • All-optical networks(AON) are emerging as the next generation broadband networks for wide-area and local-area networks. Many optical switch architectures are currently proposed to realize AON. Specially, optical switches using WDM have a lot of advantages in point of the optical transparency and network topology for B-ISDN services in AON. In this paper, two kinds of Knockout Optical Switching Architectures(KOSA) are proposed for high speed optical ATM networks. We use WDM technologies for them to operate in all-optical area and they are called Architecture-Ⅰ, Architecture-Ⅱ respectively. Each one represents different characteristics according to the number of components and the kind of components, which make KOSA have different performance and system complextity. In order to verify and to compare the performance, these architectures were analyzed and simulated in terms of cell loss ratio, system complexity and buffering speed.

  • PDF

A Case Study for Estimating the Defect Rate of PLC Using Sampling Inspection and Improving the Cause of Defects (샘플링검사를 이용한 PLC의 불량률 추정 및 불량원인 개선 사례연구)

  • Moon, In-Sun;Lee, Dong-Hyung
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.44 no.4
    • /
    • pp.128-135
    • /
    • 2021
  • WDM(Wavelength Division Multiplexing) is called a wavelength division multiplexing optical transmission method and is a next-generation optical transmission technology. Case company F has recently developed and sold PLC(Planar Lightwave Circuit), a key element necessary for WDM system production. Although Chinese processing companies are being used as a global outsourcing strategy to increase price competitiveness by lowering manufacturing unit prices, the average defect rate of products manufactured by Chinese processing companies is more than 50%, causing many problems. However, Chinese processing companies are trying to avoid responsibility, saying that the cause of the defect is the defective PLC Wafer provided by Company F. Therefore, in this study, the responsibility of the PLC defect is clearly identified through estimating the defect rate of PLC using the sampling inspection method, and the improvement plan for each cause of the PLC defect for PLC yeild improvement is proposed. The result of this research will greatly contribute to eliminating the controversy over providing the cause of defects between global outsourcing companies and the head office. In addition, it is expected to form a partnership with Company F and a Chinese processing company, which will serve as a cornerstone for successful global outsourcing. In the future, it is necessary to increase the reliability of the PLC yield calculation by extracting more precisely the number of defects.

A Study on Structure of the Large Capacity Photonic Packet Switching System (WDM 기반의 대용량 광패킷 교환시스템 구조에 관한 고찰)

  • Yang, C.R.;Choi, J.Y.;Lee, H.J.;Hong, H.H.;Kim, H.G.
    • Electronics and Telecommunications Trends
    • /
    • v.15 no.2 s.62
    • /
    • pp.15-31
    • /
    • 2000
  • IP 패킷스위칭을 수행할 수 있는 WDM 기반의 대용량 광패킷스위칭 시스템을 위해 입력광 신호 속도 10Gb/s의 16 x 단위 스위치로 구성되는 출력 버퍼링 방식의 방송 및 선택형스위치 구조가 제안되었다. 기존의 광소자는 광특성 때문에 집적광 집적화 논리회로(PCL)의 제작이 쉽지 않았으나 최근 세계적으로 어레이형 집적화 광소자의 개발 추세가 급속도로 진전되고 있어 대용량의 광교환기 시스템 구조는 기존의 교환기 시스템과 유사한 형태 및 구조가 가능하다.