• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.429-432
• /
• 2011

과적차량은 도로 및 교량 구조물과 도로 횡단 시설물 등에 손상요인으로 작용하며 기존의 단속 시스템은 축조작 및 인력부족등 많은 문제점을 내포하고 있어서 이에 대한 대처방안이 요구되고 있다. 이에 본 논문에서는 주행중인 과적차량의 지능형 임베디드 단속 시스템 개발을 위하여 유전자 알고리즘 기법을 적용, 도로자체를 저울로 하여 주행중인 차량의 하중 및 주행정보를 분석을 연구하였으며 이를 통하여 효율적인 과적 단속이 이루어 질 수 있다고 판단된다. 또한 USN구성을 위한 임베디드 센서와 함께 Internal/External Network의 무선화 시스템을 통한 사용자 중심의 시스템을 구축하는 것이 최종 목적이므로 향후 WCDMA/HSDPA를 이용한 External Network의 구성과 실제 과적 단속 적용을 위하여 Test Bed를 통한 실험이 실시되어야 할 것이다.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1602-1605
• /
• 2002

Communication schemes are currently changing from circuit switched towards packet switched. These changes enable access to Internet and multimedia services in wireless network. Provision of real-time IP services in air interface introduces relatively large overhead in RTP/UDP/IP headers. To reduce the overhead, the header compression schemes are required. There exist two header compression schemes (CRTP, ROHC) which are IETF standards. We propose Context-ID detection method which reduces more efficiently the packet loss rate than two existing schemes. Its performance in WCDMA system environment is evaluated for CRTP and ROHC schemes.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.156-160
• /
• 2012

Recently WCDMA signal transmission technology by large output microwave antenna have showed reduction of human resources and operating expense. But the existing antenna brackets cost is very expensive also its structure and functions are complicated. Unit brackets, suspending some sensors, subjected to acceleration loads, often fail due to self-vibration. To prevent such failures, it is necessary to understand the fatigue failure mode and to evaluate the fatigue life using tests or analysis techniques. The objective of this study is to develop the component test specifications, which are applicable to predict fatigue life at initial product design step, for unit brackets using vibration fatigue technique. So its application is limited to installation and management. In this project, we studied about more convenient bracket for microwave antennas through improvement on the existing antenna bracket's shortcoming and could develop an improved universal antenna bracket system for simple installation and application.

• Journal of Applied Reliability
• /
• v.8 no.4
• /
• pp.181-192
• /
• 2008

In this paper, we proposed effective algorithm that do Availability of communication network account using total probability formula. Use path tracing method about PSTN linked with MSC in WCDMA considering occasion that do not consider mobility of terminal and Availability did account. First, express minimum path series gathering by structure function after network that do modeling by stochastic graph for communication network saves all minimal path sets between particular two abutments and we gain Availability value in angular variable after express structure function by Boolean operation form and Availability between two abutments did account.

• Journal of Navigation and Port Research
• /
• v.28 no.2
• /
• pp.149-154
• /
• 2004

A linear power amplifier is particularly emphasized on the system using a linear modulations, such as 16QAM and QPSK with pulse shaping, because intermodulation distortion which causes adjacent channel interference and co-channel interference is mostly generated in a nonlinear power amplifier. In this paper, parameters of a linearization loop, such as an amplitude imbalance, a phase imbalance and a delay mismatch, are briefly analyzed to get a specific cancellation performance and linearization bandwidth Experimental results are presented for IMT-2000 frequency band The center frequency of the feedforward amplifier is 2140MHz with 60MHz bandwidth When the average output power of feedforward amplifier is 20 Watt, the intermodulation cancellation performance is more than 28dB. In this case, the output power of feedforward amplifier reduced 3.5dB because of extra delay line loss and coupling loss. The feedforward amplifier efficiency is more than 7% for multicarrier signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.83-91
• /
• 2014

The passive UHF RFID tags for item-level tagging are now explosively used in the supply chain and retail applications as they have several advantages, the two most relevant are cost and a longer read range. However, the signal interference problem between RFID tags and smart devices in real world is expected according to the smart-phone and tablet market growth together. The performance of RFID tags can be significantly less. The popular examples are the read-success rates and read range reduction. Especially, KT Corp. recently emphasized the serious signal interference at 900 MHz of LTE and old RFID frequencies through their public demonstration. By popular demands, this paper suggests the interference tolerance measurement method between the passive UHF RFID tag and the transmitted signal from a smart device. In addition, we selected three passive UHF RFID tags(Inlay) available on the market and quantitatively evaluated read range reduction results by interference signals using the PCR(Performance Change Rates) index. As a result, the LTE system is about three times as effective as the WCDMA system in terms of interference effects, and the read range performance of two RFID tags about 60 % drop.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.155-158
• /
• 2005

An invesitigation on power consumption of a mobile multimedia system using OFDM and MDVS technique is reported here. Analysis and simulation are performed to find the significances of proposed Microscopic Dynamic Voltage Scaling(MDVS) tehnique[4] on digital processor in terms of power saving. A study is also made to show power reduction in mobile multimedia system by incorporating OFDM modulation scheme in RF front-end. Finally, overall power consumption by functionally distinguished blocks ie. RF front-end, digital processor and human interface unit is shown here. Total power consumption is 8.2W for 2Mbps SD-quality WCDMA multimedia video service - the power consumption of digital processor is 3.9W(48%), the power consumption of RF front-end is 3.2W (36%), and the power consumption of interface is 1.8W(16%). Power saving of applying purposed MDVS technique is 35% in digital processor, and power saving of OFDM technique is 10-12dB in RF front-end.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.183-189
• /
• 2004

In this paper, the Eigen-RAKE receiver in wideband direct sequence code-division multiple access(DS-CDMA) systems with downlink smart antenna is analyzed for different spreading bandwidths(1.25 MHz, 5 MHz, 10 MHz) and different channel environments(macro, micro). The realistic spatio-temporal wideband multipath channel is assumed, one of which is standardized multiple-input single-output(MISO) radio channel model for WCDMA link-level simulations proposed by $3^{rd}$ generation partnership project(3GPP) contributions. We assumed spatial scattering phenomenon in which many unresolvable path signals within a limited range of spatial angle simultaneously contribute to the signals received at the receiver. Several multipaths within one chip are distinguished into each one and the first multipath components are selected as the desired signal and the others are considered self-interference. Downlink DS-CDMA system with eigenbeamformer using wider bandwidth present better performance than that using narrow bandwidth system by employing Eigen-RAKE receiver of many number of branches. It is shown that the downlink eigenbeamformer is more effective in typical urban macro cellular environments when using Eigen-RAKE receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.469-474
• /
• 2006

In this paper, we develop a method that derive the average sector throughput of HSDPA system. This proposed method reflects the effects of AMC, scheduling and multi-code transmission, and is performed by simple calculation procedures such as link budget analysis. Link budget table is used to estimate a cell coverage in general. We modify the link budget table in order to calculate C/I of the user according to the location of the user in CDMA packet system employing AMC. Furthermore, we utilize the proposed method to analyze the effects of scheduling and multi-code transmission.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.163-170
• /
• 2011

This study proposed the composition of a new long-code MMSE detector using the pilot channel that demonstrated the most excellent performance under Rayleigh fading in the previous studies. It analyzed and explained how to maintain the stability of the weight vector(introduction to the course of radio waves) in the receiver. In the operation of the receiver system to remove radio interference, the signal vector distortion received in the channel where fading was present achieved good results by compensating for signal errors. When there was distortion, the response characteristics of the received signals were superior to the common matching filter according to the computer simulation. The long-code MMSE receiver proposed in the study was able to prolong the cycle by $16{\times}T_b$ in the fading environment to fulfill the satisfaction.