• 한국표면공학회지
• /
• 제49권3호
• /
• pp.307-315
• /
• 2016

The properties of AlTiN films by a cathodic arc deposition process have been studied. Oblique angle deposition has been applied to deposit AlTiN films. AlTiN films have been deposited on stainless steel (SUS304) and cemented carbide (WC) at a substrate temperature of $500^{\circ}C$. AlTiN films were analyzed by scanning electron microscopy, glow-discharge light spectroscopy, micro-vickers hardness, and nanoindenter. When applying a current of 50 A to the cathodic arc source, it showed that the density of macroparticle of AlTiN films was 5 lower than other deposition conditions. With the increase of the bias voltage applied to the substrate up to -150 V, the density of macroparticle was decreased. The change of the $N_2$ flow rate during coating process made no influence on the film properties. For the multi-layered films, the film prepared at oblique angle of $60^{\circ}$ showed the highest hardness of 28 GPa and $H^3/E^2$ index of 0.18. AlTiN films have been shown a good oxidation resistance up to $800^{\circ}C$.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권2호
• /
• pp.99-107
• /
• 2005

본 논문에서는 단일염기변이(SNP: Single Nucleotide Polymorphism)와 같은 유전형(Rcnotype)자료에서 결측치가 발생하였을 경우 유전형 자료의 특이성을 고려해 자료 원래의 정보손실을 최소화하는 대치법인 연관불균형 기반의 대치법(linkage disequilibrium- based imputation)과 일배체형 기반의 대치법(haplotype-based imputation)을 제시한다. 이러한 결측치 대치는 실험상에서 발생하는 결측치에 의한 중요한 정보의 손실을 최소화 한다는 점에서 필요한 방법이다. 일반적으로 그동안 생물학 자료의 결측치 대치는 대부분 주형질 대치법(major allele imputation)이 활용되어왔는데 유전형 자료에서의 이 방법의 사용은 사료의 특이성으로 인하여 결측치에 대한 높은 오차율(error rate)을 보임으로서 자료의 신뢰성을 떨어뜨릴 수 있다. 본 논문에서는 유전형 자료인 단일염기변이 자료의 시뮬레이션을 통하여 기존의 주형질 대치법과 논문에서 제안된 연관불균형 기반의 대치법과 일배체형 기반의 대치법을 비교하고 그 결과를 보여 준다.

• 한국표면공학회지
• /
• 제38권3호
• /
• pp.106-111
• /
• 2005

Ternary Ti-B-C coatings were synthesized on WC-Co and Si wafers substrates by a PECVD technique using a gaseous mixture of $TiCl_4,\;BCl_3,\;CH_4,\;Ar,\;and\; H_2$. The effects of deposition variables such as substrate temperature, gas ratio, $R_x=[BCl_3/(CH_4+BCl_3)]$ on the microstructure and mechanical properties of Ti-B-C coatings were investigated. From our instrumental analyses, the synthesized Ti-B-C coatings was confirmed to be composites consisting of nanocrystallites TiC, quasi-amorphous TiB2, and amorphous carbon at low boron content, on the contrary, nanocrystallites $TiB_2$, quasi-amorphous TiC, and amorphous carbon at relatively high boron content. The microhardness of the Ti-B-C coatings increased from $\~23 GPa$ of TiC to $\~38 GPa$ of $Ti_{0.33}B_{0.55}C_{0.11}$ coatings with increasing the boron content. The $Ti_{0.33}B_{0.55}C_{0.11}$ coatings showed lower average friction coefficient of 0.45, in addition, it showed relatively better wear behavior compared to other binary coatings of $TiB_2$ and TiC. The microstruture and microhardness value of Ti-B-C coatings were largely depend on the deposition temperature.

• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.205-211
• /
• 2003

구조물의 안전성평가와 관련하여 비파괴평가 방법 중에서 음향방출 (acoustic emission, AE)기법에 의한 비파괴적 결함 발생 검출 기법은 다른 기법에 비해 비교적 새로운 평가기술로서 구조물의 이상 유무를 조기에 진단하고 주기적으로 감시할 수 있는 온-라인 모니터링에 적합하다. 그러나 한편, 국내에서는 아직까지 이에 대한 체계적인 연구가 미비한 실정이며, 대부분 값비싼 외국 시스템을 도입하여 사용하고 있는 실정이다 뿐 만 아니라 기존의 음향방출 시스템은 장치의 특성상 시스템이 매우 복잡하고 가격이 고가인 관계로 다양한 산업분야에서 실제 현장에 적용하기가 쉽지 않다. 따라서 본 연구에서는 기존의 음향방출 시스템이 가지고 있던 불필요한 낭비적인 요소들을 제거하고 실제 산업현장에 부합하는 위치표정 시스템을 개발하고자 하였다. 한편, 기존의 AE 시스템들은 위치표정을 위한 신호분석이 난해할 뿐만 아니라 박판 구조물의 경우는 위치표정이 매우 어렵다. 본 연구에서는 시간-주파수 해석에 널리 사용되고 있는 웨이블릿 기법을 이용하여 보다 정확한 위치표정을 진단하는 기법을 수행하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.467-467
• /
• 2017

토양수분 및 황사발생 연구에 있어 효율적인 광역 분석을 위하여 위성자료가 활용되고 있다. 활용 시나리오에 따라서는 준실시간 자료 수신, 처리가 필요하며 본 연구에서는 이에 대한 방안을 연구하기 위하여 유럽 EUMETSAT(European Organisation for the Exploitation of Meteorological Satellites)의 ASCAT(Advanced Scatterometer) Metop-A 자료에 대하여 파악하였다. 자료 수신 프로토콜에 있어서 FTP, HTTP 등 전통적 방법에 대한 현황과 함께 비교적 최근 기법인 OGC(Open Geospatial Consortium)　 WMS(Web Map Service), WCS(Web Coverage Service) 방식의 지원 현황에 대하여 확인하였다. 제공되는 자료 Format부분은 EPS Native와 BUFR(Binary Universal Form for the Representation of meteorological data)을 살펴보되 데이터 프로바이더 측에서 대부분 채택되고 있는 NetCDF(network Common Data Form)를 중심으로 파악하였다. 수신된 자료의 처리 자동화를 위한 소프트웨어는 OSGeo(The Open Source Geospatial Foundation)의 GDAL(Geospatial Data Abstraction Library), 미국 NCAR(National Center for Atmospheric Research)의 NCL(NCAR Command Language)을 중심으로 확인하였다. 자료 가공기법은 격자(Raster) 자료에 대한 기본 메타정보 확인, 좌표참조체계 변환, 해상도 및 Format 변환을 중심으로 확인하였다. 한편 OGC WMS, WCS는 자료의 전송 프로토콜 기법이면서 동시에 서버 사이드에서의 자료 변환 기능을 구비하고 있다. 예를 들어 Http Request에서 영역(Extent), Format 형식, 좌표참조체계를 지정할 수 있다. OGC WMS에 대한 EUMETSAT 파일럿 서비스에서 반환 자료의 공간적 영역, 복수 시점 제공 현황, 반환 포맷 지원 상황은 실제 메서드를 사용하여 파악하였고, 향후 발전 방향을 전망하였다.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.989-1002
• /
• 2018

암반 내 그라우팅은 불연속면 내부에 시멘트 그라우트재를 주입하여 주변지반을 강화하는 목적으로 사용된다. 현장에서 다상의 그라우트재의 주입 시 거동특성 및 주입경로인 3차원 절리면의 형태가 사전파악되지 않으므로 정량적인 설계가 어려운 분야중 하나이다. 따라서 현장에서의 그라우트 주입 거동특성을 나타내는 GIN (Grouting Intensity Number) 지표를 이용하여 주입 모니터링을 통해 적절한 시공관리를 수행하는 것이 최적이 방안이다. 본 논문에서는 그라우팅 주입 시 절리면의 거칠기 등급과 물시멘트(W/C)비에 따라 발생하는 압력의 손실을 전산유동해석을 수행하여 조사하였다. 절리면이 거칠수록 그리고 물시멘트비가 높을수록 주입 시 마찰저항은 크게 발생하였으며 해당 결과를 각 조건별 상관식으로 정리하였다.

• 한국농공학회논문집
• /
• 제61권3호
• /
• pp.31-41
• /
• 2019

More than 90% of roadway in the world are paved as asphalt concrete pavement due to its excellent properties compared with other paving materials; excellent riding quality, flexibility, anti-icing property and easy maintenance-ability. In this study, to make best use of the softer property of the asphalt mixture, the flexible sand asphalt mixture (FSAM) was developed for pedestrian ways. The mix design was conducted to prepare FSAM using PG64-22 asphalt, screenings (sand) less than 5mm, crumb rubber, hydrated lime and limestone powder without coarse aggregate. The deformation strength ($S_D$), indirect tensile strength (ITS) and tensile strength ratio (TSR) tests were conducted to make sure durability of FSAM performance. The impact energy absorption and flexibility were measured by drop-boll test and the resilient modulus ($M_R$) test. The impact energy absorption of FSAM was compared with normal asphalt pavement, concrete pavement, stone and concrete block for pedestrian way. As a result of drop-boll test, FSAM showed higher impact energy absorption compared with other paving materials with the range of 18% to 43%. Impact energy absorption of FSAM increased with increasing test temperature from 5 to $40^{\circ}C$. The results of $M_R$ test at $5^{\circ}C$ showed that the flexibility of FSPA was increased further, because the $M_R$ value of the sand asphalt was measured to be 38% lower than normal dense-graded asphalt mixture (WC-1). Therefore, it was concluded that the FSAM could provide a high impact absorbing characteristics, which would improve walking quality of the pedestrian ways.

• 한국의류학회지
• /
• 제43권2호
• /
• pp.184-203
• /
• 2019

This study examines the multilateral characteristics of elderly body shapes by applying body measurement items and obesity indices (BMI, WHR, WHtR, WC, and flatness). The subjects were 397 males, 378 females aged 70-85 from the $6^{th}$ Size Korea and 132 males, 212 females aged 60-69, 596 males, 650 females aged 20-29 from the $7^{th}$ Size Korea. In order to examine the body size differences among age groups, age was divided into 7 groups (20-24, 25-29, 60-64, 65-69, 70-74, 75-79, and 80-85). Both elderly males and females showed lower values of height and weight than those in their 20s. However, abdominal obesity indices (WHR and WHtR) showed higher values in the elderly than those of their 20s; in addition, they showed larger mean values as age increased. The chest and arm circumference tended to decrease in elderly males as age increased; however, elderly females tended to decrease in thigh and calf circumference size. There were gender differences in body changing due to aging. Obesity frequency was significantly higher in the elderly than in the 20s. The study represents basic data for product design for the elderly.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.533-537
• /
• 2003

Compared to sintered polycrystalline diamond (PCD), the deposited thin film diamond has a great advantage on the fabrication of cutting tools with complex geometries such as drills. Because of high performance in high speed machining non-ferrous difficult-to-cut materials in the field of automobiles industry, aeronautics and astronautics industry, diamond-coated drills find large potentialities in commercial applications. However, the poor adhesion of the diamond film on the substrate and high surface roughness of the drill flute adversely affect the tool lift and machining quality and they become the main technical barriers for the successful development and commercialization of diamond-coated drills. In this paper, diamond thin films were deposited on the commercial WC-Co based drills by the electron aided hot filament chemical vapor deposition (EACVD). A new multiple coating technology based on changing gas pressure in different process stages was developed. The large triangular faceted diamond grains may have great contribution to the adhesive strength between the film and the substrate, and the overlapping ball like blocks consisted of nanometer sized diamond crystals may contribute much to the very low roughness of diamond film. Adhesive strength and quality of diamond film were evaluated by scanning electron microscope (SEM), atomic force microscope (AFM), Raman spectrum and drilling experiments. The ring-block tribological experiments were also conducted and the results revealed that the friction coefficient increased with the surface roughness of the diamond film. From a practical viewpoint, the cutting performances of diamond-coated drills were studied by drilling the SiC particles reinforced aluminum-matrix composite. The good adhesive strength and low surface roughness of flute were proved to be beneficial to the good chip evacuation and the decrease of thrust and consequently led to a prolonged tool lift and an improved machining quality. The wear mechanism of diamond-coated drills is the abrasive mechanical attrition.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.