• Journal of Mushroom
• /
• v.9 no.4
• /
• pp.145-154
• /
• 2011

Shiitake mushroom (Lentinula edodes) is usually cultivated on the oak log. Log cultivation of this mushroom is getting difficult to get oak logs and has a weak point of its long cultivation period. Recently sawdust cultivation is getting increase. It is important to make mycelia browning on the substrate surface. This browned surface in sawdust cultivation plays an important role like as artificial bark of the oak log, which protects the other pests and suppresses water evaporation in the substrate. The period for mycelia browning is so long that the sawdust cultivation of Shiitake mushroom can not spread well into the mushroom farms. The development of methods for the rapid mycelia browning is quite required. In this article we would like to find cultural characteristics of collected strains and to see the correlation with mycelial browning. Mycelial growth in the media was different according to kinds of media and strains. The optimal temperature on mycelial growth was $20-25^{\circ}C$. Browning patterns of mycelium under 200 Lux seemed to be used for a key to differentiate the strains for sawdust cultivation. Browning period was 30-40 days in the agar media and 70-100 days in the sawdust bag cultivation. When we considered the productivity and the other characteristics, ASI 3046 is the best for the bag cultivation. Significance between mycelial growth and browning was not accepted, but that of mycelial growth between on PDA and sawdust was accepted. Browning period on the PDA and sawdust showed a strong relationships. These results suggested that the browning habits could not be depend on the difference of media, but on their own properties. To select the strain showed fast browning can be done by using agar media for saving time.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.413-420
• /
• 2013

The purpose of this study was to evaluate the control efficacy of major environment-friendly control agents against powdery mildew, as affected by the application condition such as disease-developing stage and microclimate, as compared with the efficacy of pesticides in plug seedling of three Cucurbitaceae vegetables, including cucumber, melon, and oriental melon. Single or combined application of major six environment-friendly control agents was used in the experiment: two biofungicide (Ampelomyces quisqualis 94013 and Bacillus subtilis Y1336), two plant extracts (neem oil and extracts of Rheum undulatum), and two mineral materials (wettable sulfur powder and lime bordeaux mixture). These control agents were treated to the plug seedlings for preventing powdery mildew and curative applications for managing powdery mildew. In all treatments, the disease incidence declined as daily average temperatures increased to $30^{\circ}C$ for consecutive 6~8 days with maximum temperature over $40^{\circ}C$. In preventative application, the control efficacy against powdery mildew was the highest in the treatment of wettable sulfur powder, and lowest in the B. subtilis Y1336, with values of 20~40%. In cucumber seedlings, the preventive single application of neem oil or wettable sulfur powder was more effective than curative application of fungicides, while the control efficacy of these agents was similar to those of fungicides in melon seedlings. The single application of R. undulatum extracts was also effective in preventing the disease for both cucumber and melon seedlings, showing a higher control efficacy than those of biofungicides during seedling stage. The treatment of water spray was not effective and showed a higher disease incidence than the untreated control plot in the oriental melon and melon seedlings. The curative application with environment friendly control agents, after powdery mildew was first detected, could not successfully controlled the disease at the middle stage (5~10% of disease incidence) of disease development. The curative combined application of [R. undulatum extracts (1st application) + wettable sulfur powder (2nd) + neem oil (3rd)] showed the highest control efficacy among the other treatments, with control value over 80% at the early stage (less than 1% of disease incidence) of disease development.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.424-431
• /
• 2013

Consumption of waxy corn is steadily increasing due to consumer preference for natural food. However, availability of waxy corn is limited because most of them are used for steamed waxy corn. It is therefore important to create new demands of waxy corn using food processing technology. There is little prior research about characteristics of milled kernel in waxy corn. This study examined the physicochemical and cooking properties of milled kernel using nine waxy corn hybrids. Colored hybrids (Heukjinju, Miheukchal, and Eolrukchal1) showed high milling yield and low change of grain length after milling process compared to other hybrids. The total starch content ranged from 62.1 to 68.4% and the gelatinization temperature of starch was lowest in Yeonnong1 ($69.9^{\circ}C$). The breakdown viscosity of Yeonnong1, Miheukchal and Heukjinju was higher than those of tested hybrids, whereas setback viscosity of those hybrids was lower. In cooking properties of milled waxy corn, water absorption and volume expansion rate were high in Yeonnong2 (84.9, 219.3%), Miheukchal (85.9, 211.4%), and Heukjinju (80.9, 203.7%). In the sensory test, the overall preference was significantly higher in Heukjinju and Miheukchal. Thus, Heukjinju, Yeonnong2, and Miheukchal showed good scores in milling yield, cooking properties, and the preference of sensory test. These results will provide fundamental information to extend milled waxy corns usage.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.395-405
• /
• 2012

Lipozyme TL IM-catalyzed esterification was carried out to produce functional hard fat (structured lipid, SL) using palm stearin (PS) and hydrolysate of pomegranate seed oil (HPSO) of 1:6 molar ratio. HPSO contained conjugated linolenic acid (CLnA, about 80%). The reaction was performed at non-solvent system and solvent (n-hexane) system using Lipozyme TL IM (10% of total substrates, w/w) for 12, 24, and 72 hr in a shaking water bath ($55^{\circ}C$ and 185 rpm), respectively. SL synthesized in non-solvent system (NH-SL) and SL synthesized in n-hexane system (H-SL) were refined after deacidification, respectively. Their physicochemical properties were compared to obtain desirable functional hard fat. The content of CLnA in NH-SL increased from 34.38% to 40.63% with increasing reaction time. Similar results also observed in H-SL resulting in 36.81~45.83% of CLnA. In triacylglycerol (TAG) composition, the main molecules of LnLnLn (Ln=linolenic acid, PN=36) and the LnLnP (P=palmitic acid, PN=40) were newly synthesized in NH-SL and H-SL with increasing reaction time. After 72 hr reaction, iodine values of NH-SL (136.49) and H-SL (140.37) showed high values because of the high content of CLnA. Solid fat index (SFI) in NH-SL was higher than that in H-SL at each measured temperature. The predominant polymorphic forms of NH-SL and H-SL obtained after esterification for 72 hr were the desirable crystalline structure of the ${\beta}$' form.

• Korean Journal of Ichthyology
• /
• v.13 no.3
• /
• pp.181-189
• /
• 2001

Spawning behavior of the Takifugu pardarlis (Temminck et Schlegel) was observed on the Jook-do coast in Tongyong from March 1997 to June 1999. The spawning ground was locted in the intertidal zone between Tongyong and Koje-do. Its bottom was mainly gravels and stones, and its depth was 0.5~1.0 m. Spawning season was from the end of the March to the middle of May. During the spawning season, the mature fishes formed school a of 10~30 individuals, then moved to the spawning ground together. When a mature female spawned eggs, the attendant males fertilized them at the same time. The fertilized eggs obtained from the parent fishes caught at the spawning ground were adhesive, opaque and spherical, measuring 1.14~1.24 mm (mean 1.19 mm, n = 50) in diameter with numerous tiny oil globules. Hatching period was about 205 hours after fertilization at water temperature of $18.0{\pm}0.5^{\circ}C$. The newly hatched larvae were 2.92~3.10 mm (mean 3.01 mm, n = 20) in total length (TL), had a large yolk, and 11~13+14~15 = 25~28 myomeres. At 5 days, the larvae had attained 3.79~3.85 mm (mean 3.82 mm, n = 20) in TL and had transformed into the postlarval stage. At 15 days, the postlarvae had attained 7.78~7.90 mm (mean 7.84 mm, n = 20) in TL. At 21 days, had larvae attained 10.15~10.27 mm (mean 10.21 mm, n = 20) in TL and had reached the juvenile stage. All fins were formed with a complete set of fin rays having the following counts: dorsal fin rays 11~12; anal fin rays 9; pectoral fin rays 14~15; caudal fin rays 11~12.

• Korean Journal of Ichthyology
• /
• v.11 no.1
• /
• pp.94-101
• /
• 1999

This study was conducted to observe the early life history of sea bass, Lateolabrax japonicus. The fertilized eggs were spherical in shape and turned out to be separative and floated. Their membrane and yolk having 1~5 oil globule were transparent. Fertilized eggs were measured to be 1.33~1.46 mm in diameter. Hatching of eggs were started at 74 hrs 15 mins, 54 hrs 55 mins, 50 hrs 45 mins, after fertilization in water temperature $16.0^{\circ}C$, $18.0^{\circ}C$, $20.0^{\circ}C$ respectively. The newly hatching larvae were 3.79~3.97 mm in total length with 35~37 myomeres, and mouth and anus were closed. Melanophores were distributed on the up side of head, upper jaw and margins of the body. The 5 days after hatching larvae measured 4.78~5.24 mm in total length, yolk were completely absorbed, and transformed to postlarval stage. In this time, mouth of larvae was opened, and also melanophores were presented on the lower jaw. Head of larvae grew remarkably. The 21~22 days after hatching, total length of the larvae was 7.15~8.12 mm, the caudal fin rays began to differentiation. In 31 days after hatching, the larva were 8.46~9.16 mm in total length, and tip of the caudal notochord flexed $45^{\circ}$. The larvae reached to the juvenile stage with all the fins were developed at 61 days after hatching and attained 16.28~17.31 mm in total length.

• Korean Journal of Ichthyology
• /
• v.19 no.4
• /
• pp.350-359
• /
• 2007

The egg development and morphological change of larvae and juveniles of the starry flounder, Platichthys stellatus were observed in laboratory. Fertilized eggs of the species, 1.09~1.19 mm (mean $1.13{\pm}0.03mm$, n=50) in diameter, were floating, colorless, transparent in shape and lacked in oil globules. The eggs hatched out 121 hours after fertilization at water temperature $8.2{\sim}11.2^{\circ}C$. The size of the hatched larvae were 2.58~2.89 mm (mean $2.67{\pm}0.09mm$) in total length, their mouth and anus were not open yet and myotome number was 14+27=41. Melanophore and xanthophore appeared on the notochord and digestive organ and the margin of membrane fin, on the yolk sac and eyes were lacking in pigment cells. 5 days after hatching the larvae attained 4.30~4.97 mm (mean$4.74{\pm}0.21mm$) in TL, and their mouth and anus were open. 10 days after hatching the larvae transformed to postlarval stage and they were 4.67~5.75 mm in TL (mean $5.30{\pm}0.31mm$), and absorbing the yolk completely. Feeding activity increased as the mouth became larger. At 23 days, the larvae attained 6.69~8.82 mm in TL (mean $7.85{\pm}0.75mm$), and the right eye was started moving to the left side of the head. At 52 days, the juveniles attained 10.99~17.06 mm in TL (mean $13.50{\pm}1.67mm$). The right eye was moved completely onto the left side. All of the fins had completed set of the fin rays (D. 64~67: A. 45~51: P. 11: V. 6: C. 19).

• Korean Journal of Ichthyology
• /
• v.19 no.4
• /
• pp.306-317
• /
• 2007

Reproductive cycle with the gonad developmental phases, first sexual maturity, spawning frequency, sex ratio of the dusky mud hopper, Periophthalmus modestus were investigated by histological observations. Monthly variations of the gonadosomatic index (GSI) began to increase in May and reached a maximum in June when the gonad was getting mature during the period of higher ground (water) temperature-long day length. Changes in the GSI showed a negative correlation to the HSI, but coincided with the fatness index. The reproductive cycle can be classified into five successive stages: in female, early growing stage (April to May), late growing stage (April to May), mature stage (May to June), ripe and spent stage (June to August), and recovery and resting stage (August to March); in males, growing stage (April to May), mature stage (May to June), ripe and spent stage (June to August), and recovery and resting stage (August to March); According to the frequency distributions of egg diameters during the breeding season, Periophthalmus modestus is presumed to be a summer breeder, asynchronous group and polycyclic species to spawn 2 times or more during the spawning season. Total eggs and mature eggs in absolute fecundity and relative fecundity (per cm) increased with the increase of body length. Total eggs and mature eggs in absolute fecundity and relative fecundity (per g) did not increase with the increase of body weight. Percentages of first sexual maturity of females and males ranging from 5.1 to 5.5 cm in body length are over 50%, and 100% for fish over 7.1 cm in body length. The sex ratios of females to males over 5.1 cm in body length were not significantly different from a 1 : 1 sex ratio.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.147-152
• /
• 2016

This study was conducted to investigate the physicochemical quality properties and provide basic data for the activation of traditional Kamju of juice type product prepared by mixing malt and extruded rice collet powder. Malt extracts were prepared by extracting the mixture of malt and water at a weight ratio of 25:75 after soaking for 2 h at $45^{\circ}C$. Rice collet powder was prepared by adjusting the barrel temperature to $95^{\circ}C$, screw speed to $3.07{\times}g$, discharge port diameter to 7 mm and a raw material input to 50 kg/h, the powder was then ground to a particle size of 80 mesh. The physicochemical characteristics (pH, color, viscosity, reducing sugars, number of viable cells, free amino acids) and sensory evaluations were conducted at various time points during the saccharification and at different mixing ratios of the extruded rice collet powder to malt extract (5:95, 15:85, 25:75, 35:65, each at $55^{\circ}C$ for 9 h). As a result, with an increase in the proportion of the extruded rice collet powder and saccharification time, the physicochemical properties of traditional Kamju significantly improved (p<0.05). A mixing ratio of 35:65 rice collet powder to malt extract and a saccharification time of 9 h were found to be the most desirable conditions. However, based on the sensory evaluation, a mixing ratio of rice collet powder and malt extract of 25:75 and a saccharification time of 5 h resulted in the most preferable palatability of traditional Kamju (p<0.05). Therefore, the mixing ratio and saccharification time should be determined to provide a better choice with respect to the taste and economic aspects of traditional Kamju.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.911-922
• /
• 2015

This study was carried out to evaluate growth characteristics of Kimchi cabbage cultivated in various highland areas, and to create a predicting model for the production of highland Kimchi cabbage based on the growth parameters and climatic elements. Regression model for the estimation of head weight was designed with non-destructive measured growth variables (NDGV) such as leaf length (LL), leaf width (LW), head height (HH), head width (HW), and growing degree days (GDD), which was $y=6897.5-3.57{\times}GDD-136{\times}LW+116{\times}PH+155{\times}HH-423{\times}HW+0.28{\times}HH{\times}HW{\times}HW$, ($r^2=0.989$), and was improved by using compensation terms such as the ratio (LW estimated with GDD/measured LW ), leaf growth rate by soil moisture, and relative growth rate of leaf during drought period. In addition, we proposed Excel spreadsheet model for simulation of yield prediction of highland Kimchi cabbage. This Excel spreadsheet was composed four different sheets; growth data sheet measured at famer's field, daily average temperature data sheet for calculating GDD, soil moisture content data sheet for evaluating the soil water effect on leaf growth, and equation sheet for simulating the estimation of production. This Excel spreadsheet model can be practically used for predicting the production of highland Kimchi cabbage, which was calculated by (acreage of cultivation) ${\times}$ (number of plants) ${\times}$ (head weight estimated with growth variables and GDD) ${\times}$ (compensation terms derived relationship of GDD and growth by soil moisture) ${\times}$ (marketable head rate).