• 수산해양기술연구
• /
• 제33권3호
• /
• pp.189-193
• /
• 1997

We make an ultrasonic system as a trial to measure the distance between trawl doors, and carried out a water tank ($24{\times} 24$m, water depth 1 m) experiment for confirming the practical use of the system in October 1996. This system calculates the distance between the pinger (50 kHz) and the transponder (50 kHz/70 kHz) attached each one on the trawl door by measuring the time-difference of receiving with two channels receiver on the trawler. This paper assums that both the length of the warp from the stern to the trawl door is same. At results the system shows a good relation between the distance and the time-difference of receiving while the location of the pinger is moved in variously in the water tank, and it was found that the method of measuring techniques on the prototype system could be applied to the measurement of the trawl door opening in the field experiment.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.15-21
• /
• 2009

The anisotropic mechanical properties were measured for the three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate. In tensile and flexural tests, axial and edge type specimens failed by pull-out of warp and fill yarns, respectively. In contrast, the thickness type specimens failed by adhesive failure process. Longitudinal cracking occurred in several of the edge type specimens during tensile test. That cracking caused pop-in in the stress-strain curve. Defects induced by improper coupon machining caused that cracking.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5506-5521
• /
• 2017

Three-dimensional video (3DV), as the new generation of video format standard, can provide the viewers with a vivid screen sense and a realistic stereo impression. Meanwhile the view synthesis has become an important issue for 3DV application. Differently from the conventional methods based on depth, in this paper we propose a new view synthesis algorithm, which can employ the correlation among views and warp in the image domain only. There are mainly two contributions. One is the incorporation of sobel edge points into feature extraction and matching, which can obtain a better stable homography and then a visual comfortable synthesis view compared to SIFT points only. The other is a novel image blending method proposed to obtain a better synthesis image. Experimental results demonstrate that the proposed method can improve the synthesis quality both in subjectivity and objectivity.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.113-120
• /
• 2005

Helium-oxygen plasma treatments were conducted to modify poly(trimethylene terephthalate) (PIT) and poly(ethylene terephthalate) (PET) warp knitted fabrics under atmospheric pressure. Lubricant and contamination removals by plasma etching effect were examined by weight loss $(\%)$ measurements and scanning electron microscopy (SEM) analysis. Surface oxidation by plasma treatments was revealed by x-ray photoelectron spectroscopy (XPS) analyses, resulting in formation of hydrophilic groups and moisture regain $(\%)$ enhancement. Low-stress mechanical properties (evaluated by Kawabata evaluation system) and bulk properties (air permeability and bust strength) were enhanced by plasma treatment. Increasing interfiber and interyarn frictions might play important roles in enhancing surface property changes by plasma etching effect, and then changing low-stress mechanical properties and bulk properties for both fabrics.

• 천문학회지
• /
• 제37권4호
• /
• pp.205-210
• /
• 2004

The interaction of disk galaxies with intergalactic winds has been invoked as a possible mechanism of the generation of galactic warps. Here we discuss conditions under which intergalactic flows can be relevant for warping field galaxies. Constraints include the heating of the outer disk, the level of asymmetry in the vertical distribution of the volume gas density, the angular frequency of the warp, the symmetry of galactic warps amplitude between the approaching and receding sides of the galaxy, and the speed of the intergalactic flow whether subsonic or supersonic. These constraints are discussed in this paper in reference to the proposal of Lopez-Corredoira et al. that warps can be a natural consequence of accretion flows onto the disk.

• 연구논문집
• /
• 통권28호
• /
• pp.89-100
• /
• 1998

This paper deals with the design and analysis of a beating cam. The beating device of a high speed rapier loom, weaving fabric by completion of warp-weft patterns, is driven by double cam type on the same axis. As the double cam, coupled with two cams, performs the mutual conjugate motion, the double cam must be very preciously designed for smooth. For the shape design of a double cam, an instant velocity center method is proposed. This method can determine the cam profile from the contact conditions of the cam and roller follower and the velocity relationships at the instant velocity center. And the practical applicability was verified by developing “DISKCAM of a CAD program. As the results in this paper, the shapes of two cams, which are in the conjugate motion, are designed by instant velocity center method. We applied 8-order polynominals for the beating as displace¬ment curves for shape determination of double cams. The data of displacement, velocity, and acceleration of beating cam can be used adjust in accurate operation and to develope an advanced beating device.

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.57-60
• /
• 2014

The distortion correction system of Head up display that is installed in vehicle has been studied both experimentally and theoretically for the removal of the optical lens distortion. A new adaptive correction method is having a decisive effect on correction in the optical lens distortion of Head up display. This adaptive correction system removes various distortion that has occurred because of the design tolerances of Head up display and the assemble tolerances into vehicle. It is especially efficient in removal of a barrel distortion and pin cushion of Head up display.

• 한국컴퓨터정보학회논문지
• /
• 제21권2호
• /
• pp.9-16
• /
• 2016

Recently, many research groups have focused on GPGPUs in order to improve the performance of computing systems. GPGPUs can execute general-purpose applications as well as graphics applications by using parallel GPU hardware resources. GPGPUs can process thousands of threads based on warp scheduling and CTA scheduling. In this paper, we utilize the traditional CTA scheduler to assign a various number of CTAs to SMs. According to our simulation results, increasing the number of CTAs assigned to the SM statically does not improve the performance. To solve the problem in traditional CTA scheduling schemes, we propose a new IPC-based dynamic CTA scheduling scheme. Compared to traditional CTA scheduling schemes, the proposed dynamic CTA scheduling scheme can increase the GPU performance by up to 13.1%.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.169-172
• /
• 2004

We fabricated MWNT-added glass fabric/epoxy composites. We observed the distribution of MWNTs in the composites using scanning electron microscopy and conformed that most of MWNTs exist in matrix rich region and interface between yams in warp and fill directions. We also investigated the change of permittivities with MWNT concentrations. Only $1wt\%$ MWNTs leads to high permittivity and electromagnetic waves are impossible to be transmitted to more than $3wt\%$ MWNT-added composites, which means the characteristics of these composites are comparable to those of metals or carbon fiber-reinforced composites.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.51-54
• /
• 2004

Testing methods for mechanical properties of the advanced composites were introduced. The mechanical properties, such as tensile properties, compressive properties, in-plane shear properties, flexural properties, and interlaminar shear properties, were evaluated along the warp and the fill directions. The CF3327 of the carbon fabric, the HG1581 of the glass fabric, and the HK285 of the aramid fabric were considered as reinforcements. Epoxy and phenolic resin were used as resin. The experimental results obtained in this study would be applicable in the design and structural analysis for the manufacture of the carbody of the tilting train.