• 한국의류학회지
• /
• 제21권4호
• /
• pp.710-717
• /
• 1997

An investigation made of fabric strength & elongation and the lock stitch seam strength & elongation by stitch density (N1.5; 26 stitches/3 cm, N2.0; 19 stitches/3 cm, N2.5; 14 stitches/3cm) depending on methods of. sample prepariation (angle variations of unseamed sample and overlapping way of seamed sample) It found maximum stitch density that results of the seam strength test was highist in each angle of bias. The results obstained were as follows: 1. As the results of fabric strength and elongation tests as a function of angle of bias, breaking strength were that warp and weft angles (0$^{\circ}$, 90$^{\circ}$) were much higher than bias angles (20$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$) . And otherwise breaking elongation were that 45$^{\circ}$ angle of bias were highest and were that the warp & weft way were lower. 2. As the results of the seam strength tests by the stitch density under samples of same angles, the maximum stitch density were those; under 0$^{\circ}$/0$^{\circ}$, 60$^{\circ}$/60$^{\circ}$:F1, F2-N2.0, F3-N1.5, under 20$^{\circ}$/20$^{\circ}$, 30$^{\circ}$/30$^{\circ}$, 45$^{\circ}$/45$^{\circ}$: F1-N2.5, F2-N2.0, F3-N1.5, under 90$^{\circ}$/90$^{\circ}$: F1, F2, F3-N1.5. 3. As the results of the seam strength tests by the stitch density under samples of symmetry angles, the maximum stitch density were those; under 20$^{\circ}$/-20$^{\circ}$, 30$^{\circ}$/-30$^{\circ}$, 60$^{\circ}$/-60$^{\circ}$: F1, F3-N1.5, F2-N2.0, under 45$^{\circ}$/-45$^{\circ}$: F1, F2-N2.0, F3-N1.5.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.288-295
• /
• 2012

Although some degree of mechanical properties of suede fabrics mainly related to non-woven suede fabric has some researched, the thin suede fabric has rarely been researched. In this study, polyester(DTY 50/72) was used for warp, and after producing latent yarn and sea-island yarn for weft, two yarns were compounded to produce sea-island DTY yarn. By using the two produced yarns for warp and weft, we produced thin suede fabric with stretch function. For weft 2ply, weft density 85, 90, 100(picks/in) were applied to weave fabric, and for weft 1ply, weft density 125, 135, 140(picks/in) were applied to produce weft face 5-end satin weave. The mechanical properties of the produced fabric were researched. The result are as followed. The weight loss ratio of the suede fabric produced for this experiment reached 15% on the conditions of temperature $90^{\circ}C$ and 20 minutes, so that island parts were completely separated. The strength of weft 1ply applied suede fabric was about 7.5kg and that of 2ply suede fabric and about 3.5kg. But the strain of two samples ranged from about 40 to 43%. Although Hari was high when weft was denser. The values of Koshi and Kisimi were low. And shear stiffness was high when sea-island DTY yarn was used. The WC value was higher in the case of 2ply than in that of 1ply sea-island DTY yarn for weft, so that we may conclude that Fukurami was more affected in the 2ply case.

• 한국정보통신학회논문지
• /
• 제12권4호
• /
• pp.611-619
• /
• 2008

본 논문에서 구현한 2.5D 맵핑(mapping) 시스템은 다양한 질감과 패턴에 따른 패션 의상의 모델 사진 이미지를 그대로 살려 외각선 영역 위에 드레이핑(draping)함으로써 새로운 디자인을 창출할 수 있고, 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인할 수 있다. 또한 원단 디자인과 최종 제품의 상태를 정확하게 예측할 수 있는 기능을 제공하며, 원단과 모델 사진 이미지의 데이터베이스 구축으로 쉽고 빠르게 드레이핑함으로써 패션 업계의 경쟁력 향상과 비용 절감 효과를 가져 올 수 있다. 2.5D 맵핑 시스템은 보다 자연스러운 드레이핑을 위하여 메쉬 워프 알고리즘 모듈, 명암 추출과 적용 모듈, 맵핑 영역 추출 모듈, 메쉬 생성과 변형 모듈, 2.5D 맵핑 모듈로 구성하여 구현하였다. 향후 연구과제는 2.5D 맵핑 시스템의 구현 기술을 기반으로 하여 3D 의복 기술과 3D 인체 구현 기술을 접목한 3D 패션 디자인 시스템을 연구하여 2.5D 맵핑 기술의 표현 한계를 극복할 계획이다.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.841-848
• /
• 2021

본 연구의 목적은 스마트폰을 사용하는 사용자들이 의사결정에 어떤 요소를 통해 영향을 미치는지 탐구하는 것이었다. 본 연구는 친밀감/개인 연결성, 사용/의존성, 친숙함/전문성, 효능/효과, 자아정체성, 제어 등을 독립변수로 설정하고 의사결정은 종속 변수로 설정하였다. 본 연구에서는 스마트폰 사용자 200명을 설문지를 통해 수집·분석하였으며, 변수 간 영향을 파악하기 위해 WarpPLS를 사용하였다. 이 연구는 사용자의 심리적인 의사결정이 스마트 기기에 어떤 요인으로 영향을 미치며, 이를 통해 미래 산업의 발전과 스마트 기기를 사용하는 사용자들의 특성과 수용성을 파악할 수 있다.

• Structural Engineering and Mechanics
• /
• 제90권6호
• /
• pp.543-549
• /
• 2024

The utilization of the fabric materials for lightweight building structures has attracted considerable attention due to the multiple functions and high strength-to-weight ratio. The mechanical properties of the fabric materials evolve with the loading cycle, especially for the Poisson's ratio that requires the full cyclic strain to determine the accurate values. The digital image correlation method has been justified but needs to meet the flexibility and complexity requirements of the fabric materials. This paper thus proposes a modified digital image correlation method to quantify the Poisson's ratio of fabric materials. To obtain the accurate Poisson's ratio of fabric materials in the cyclic experiments using non-contact measuring method, a speckle generation of the digital image correlation method is implemented to obtain the strain distribution and strain characteristics. The uniaxial cyclic experiments for the fabric materials are carried out in the warp, weft and 45° directions. The digital image correlation photos are taken when the material properties become stable in the cyclic loading. The results show that the strain distributions are non-uniform and dependent on the specimen directions. The reliable Poisson's ratios of the fabric materials in the warp, weft and 45° directions are 0.016, 1.2 and 2.6. The strain asymmetry at the maximum strain position is related with the weaving architecture. These observations and results are indispensable to understand the Poisson's ratios of fabric materials and to guide the proper analysis of the large-span membrane structures.

• 한국의류학회지
• /
• 제11권1호
• /
• pp.1-10
• /
• 1987

We selected four kinds of cotton velvet and chafed before and after cleaning, then in accordance with abrasion times we measured of pile exclusion rate and examined the relationship of the pile exclusion rate, its thickness and the air permeability. An experimental study was carried out the pile weave construction, the density, the yarn to yarn, the shrinkage, and the pile substantiality. The results were as follows: 1. In accordance with increments of shrinkage phenomenon of pile fabric for cleaning process, pile exclusion rate was decreased. 2. The ground weave of pile fabric and the yarn to yarn of warp and weft direction were affected by the pile exclusion. 3. It is linear of pile substantiality of pile fabric and pile fastness. 4. In estimation of pile exclusion rate, it is proper to make use of air permeability and measuring value of thickness.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.233-240
• /
• 2011

A fineness range of 150 Nm-170 Nm has recently been applied to produce much finer wool products, so that processing techniques for the wool fabrics have been developed very rapidly. However, the worsted wool-like technique using polyester fiber has not been still implemented in general processing technique. Therefore, this research is to develop materials of side-by-side type with high finess, high shrinkage and stretchability. The mechanical properties of the produced fabrics were analyzed and the fundamental information were obtained for the new worsted wool-like products. The physical properties of a latent crimped yarns of side-by-side type with stretch function are analyzed. Also the mechanical properties of five kinds of fabrics are analyzed, which are produced with non-circular shape(+type) warp yarns of a twist of 1000(T/M) and with two kinds of latent weft yarns of a twist of 1000 T/M and DTY respectively.

• Journal of Computing Science and Engineering
• /
• 제11권2호
• /
• pp.58-68
• /
• 2017

While graphics processing units (GPUs) can be used to improve the performance of real-time embedded applications that require high throughput, it is challenging to estimate the worst-case execution time (WCET) of GPU programs, because modern GPUs are designed for improving the average-case performance rather than time predictability. In this paper, a reordering framework is proposed to regulate the access to the GPU data cache, which helps to improve the accuracy of the estimation of GPU L1 data cache miss rate with low performance overhead. Also, with the improved cache miss rate estimation, tighter WCET estimations can be achieved for GPU programs.

• 대한가정학회지
• /
• 제33권6호
• /
• pp.179-186
• /
• 1995

The purpose of this paper was to identify bonding strength by weave (plain weave, twill weave, satin weave) and counts(20 s, 40s) of the face cloth cotton 100% in the course of sewing process using by cotton fabric of adhesive interlining. The results of the study was as follows. 1. With the increased laundry, it revealed that the bonding strength was decreased to some degree regardless of the kinds of face cloth. 2. the bonding strength by the counts of the face cloth appeared in order of 40 s<20 s. 4. It was observed that there are no significant differences on the adhesive strength in the cutting directions which are an inclination warp, weft, bias in this experiment.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.71-75
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process have been utilized for providing through-thickness reinforcements. 2D preforms were stacked with S-2 glass plain weave and S-2 glass MWK (Multi-axial Warp Knit) L type. 3D preforms were fabricated using the stitching process. All composite samples were fabricated by RTM (Resin Transfer Molding) process. To examine the damage resistance performance the low speed drop weight impact test has been carried out. For the assessment of damage after the impact loading, specimens were examined by scanning image. CAI (Compressive After Impact) tests were also conducted to evaluate residual compressive strength. Compared with 2D composites, the damage area of 3D composites was reduced by 20-30% and the CAI strength showed 5-10% improvement.