• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.278-281
• /
• 2011

This system can predict the maximum output about all illumination levels so that the PV system designer can design the system having the best efficiency. For the output prediction exact about the solar cell, that is the device the basis most in the PV system, the basis has to be in order to try this way. The solution based on Lambert W-function are presented to express the transcendental current-voltage characteristic containing parasitic power consuming parameters like series and shunt resistances. A simple and efficient method for the extraction of a single current-voltage (I-V) curve under the constant illumination level is proposed. With the help of the Lambert W function, the explicit analytic expression for I is obtained. And the explicit analytic expression for V is obtained. This analytic expression is directly used to fit the experimental data and extract the device parameters. The I-V curve of the solar cell was expressed through the modeling using Lambert W-function and the numerical formula where there is the difficulty could be logarithmically expressed This method expresses with the I-V curve through the modeling using Lambert W-function which adds other loss ingredients to the equation2 as to the research afterward. And the solar cell goes as small and this I-V curve can predict the power penalty in the system unit.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.52-61
• /
• 2013

This study was conducted to investigate the effects of pergola's shading on the thermal comfort index in the summer. The 3 type of pergolas($4m{\times}4m{\times}h2.7m$) which were screened overhead(I)/overhead west(II)/overhead west north(III) plane with reed blind for summer shading and winter wind break, were constructed on the 4th floor rooftop. Thereafter the meteorological variables(air temperature, humidity, radiation, and wind speed) of pergola I, III and rooftop were measured from 14 to 16 August 2013(1st experiment), those of pergola I, II and rooftop were measured from 26 to 28 August 2013(2nd experiment). The effects of pergola's shading on the radiation environment and mean radiant temperature($T_{mrt}$), standard effective temperature($SET^*$) were as follows. The maximum 1 h mean values of differences ${\Delta}$ of the sums of shortwave radiant flux densities absorbed by the human body (${\Delta}K_{abs,max}$) between pergola I, III and nearby sunny rooftop were $-119W/m^2$, $-158W/m^2$, those between pergola I, II and rooftop were $-145W/m^2$, $-159W/m^2$. The maximum 1 h mean values of differences ${\Delta}$ of the sums of long wave radiant flux densities absorbed by the human body (${\Delta}L_{abs,max}$) between pergola I, III and nearby sunny rooftop, were $-15W/m^2$, $-17W/m^2$, those between pergola I, II and nearby rooftop, were $-8W/m^2$, $-7W/m^2$. The response of the direction dependent long wave radiant flux densities $L_1$ on the pergola's shading turned out to be distinctly weaker as compared to shortwave radiant flux densities $K_1$. The pergola's shading leads to a lowering of $T_{mrt}$ and $SET^*$. The peak values of $T_{mrt}$ absorbed by the human body were decreased $16^{\circ}C$ and $21.4^{\circ}C$ under pergola I and III as compared to that of nearby rooftop in the 1st experiment. Those were decreased $18.8^{\circ}C$ and $20.8^{\circ}C$ under pergola I and II as compared to that of nearby rooftop in the 2nd experiment. The peak values of $SET^*$ absorbed by the human body were decreased $2.9^{\circ}C$ and $2.6^{\circ}C$ under pergola I and III as compared to that of nearby rooftop in the 1st experiment. Those were decreased $3.5^{\circ}C$ and $2.6^{\circ}C$ under pergola I and II as compared to that of nearby rooftop in the 2nd experiment. The relative $SET^*$ decrease in pergola II, III compared to nearby sunny rooftop $SET^*$ were lower than that in pergola I, revealing the influence of the wind speed. Therefore it is essential to design pergola to maximize wind speed and minimize solar radiation to achieve comfort in the hot summer. The $SET^*$ under pergola I, III were exceeded $28.7^{\circ}C$ and $30.4^{\circ}C$ which were the upper limit of thermal comfort and tolerable zone during all most daytimes in the 1st experiment(maximum air temperature $37.5^{\circ}C$). The $SET^*$ under pergola I was exceeded $28.7^{\circ}C$ which was the upper limit of thermal comfort zone at 13h, that under pergola II was exceeded $28.7^{\circ}C$ from 8h to 14h, meanwhile the $SET^*$ under pergola I, II were within thermal tolerable zone during most daytimes in the 2nd experiment(maximum air temperature $34.4^{\circ}C$). Therefore to ensure the thermal comfort of pergola for summer hottest days, pergola should be shaded with not only reed blind but also climbing and shade plants. $T_{mrt}$ and $SET^*$ were suitable index for the evaluation of pergola's shading effects and outdoors.

• Journal of Powder Materials
• /
• v.5 no.2
• /
• pp.89-97
• /
• 1998

Sintering behavior of nanostructured(NS) W-Cu powders prepared by mechanical alloying (MA) was investigated as a function of sintering temperature. MA NS W-2owt%Cu and W-3owt%Cu composite powders with the crystal size of 20-30 nm were annealed at 90$0^{\circ}C$, and thermal characteristics of those powders were investigated by DSC. Sintering behavior of MA NS W-Cu composite powders was investigated during the solid-state sintering and the Cu-liquid phase sintering. The new nanosintering phenonenon of MA W-Cu powders at solid-state sintering temperature was suggested to explain the W-grain growth in the inside of MA powders. The sintering densification of MA NS W-Cu powders was enhanced at Cu melting temperature by arrangement of MA powders, i.e., the first rearrangement of MA powders was occurred, and then the rearrangement of W-grains in the sintered parts was also took place during liquid-phase sintering, i.e., the second rearrangement was happened. Due to the double rearrangement process of MA NS W-Cu powders, the high sintered density with more than 96%o was obtained and the fine and high homogeneous state of W and Cu phases was achieved by sintering at 1200 $^{\circ}C$.

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.765-774
• /
• 2002

Suppose one is given a vector X of a finite set of quantities $X_i$ which are independent Poisson random variables. A null hypothesis $H_0$ about E(X) is to be tested against an alternative hypothesis $H_1$. A quantity $\sum\limits_{i}w_ix_i$ is to be computed and used for the test. The optimal values of $W_i$ are calculated for three cases: (1) signal to noise ratio is used in the test, (2) normal approximations with unequal variances to the Poisson distributions are used in the test, and (3) the Poisson distribution itself is used. The above three cases are considered to the situations that are without background noise and with background noise. A comparison is made of the optimal values of $W_i$ in the three cases for both situations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1477-1480
• /
• 2008

주민번호대체수단은 주민번호를 대체하기 위한 본인확인정보로서, 5 개의 민간기업이 운영하는 민간 i-PIN과 행정안전부가 운영하는 공공 i-PIN이 서비스를 제공하고 있다. 하지만 주민번호대체수단이 더욱 활성화되기 위해서는 기존에 제시된 보안성, 편의성 문제를 해결해야 한다. 본 논문은 신원 선택기를 추가하여, i-PIN의 프로토콜을 변경하지 않는 범위 이내에서 i-PIN의 단점으로 지적되는 로그인 번거로움, i-PIN 사이트 기억 문제, 피싱을 비롯한 보안 문제를 해결하는 방안을 제시하였다. 제안하는 방법은 사용자가 가입한 i-PIN 제공자에 접근하는 단계, i-PIN 제공자에 id 와 비밀번호를 입력하는 단계를 없애고, 신원 선택기를 통해 사용할 신원 정보를 선택하는 것만으로 처리되도록 하였다. 본 기술은 ETRI 에서 개발중인 전자 ID 지갑 솔루션을 통해 구현되었으며, 해당 서비스는 2009 년 중에 민간 i-PIN 제공자를 통해 시범 도입될 예정이다.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.113-118
• /
• 2006

The design of superconducting magnets for a 600 kJ SEMS was discussed. The basic constraint conditions in the design of a 600 kJ SMES magnet were V-I loss(<1 W), inductance of magnet(<24 H), the number of Double Pancake Coils(DPC about 10), the number of turns of DPC(<300), outer diameter of DPC(close to 800 mm) and total length of HTS wire in a DPC(<500 m). As a result of optimum design, we obtained design parameters of the 600 kJ SMES magnet with two operating currents, 360 A and 370 A, which are in the limited conditions without V-I loss. V-I loss of each operating current was calculated with design parameters and V-I characteristic of the HTS wire. As a result of calculations, V-I losses with operating currents of 360 A and 370 A were 0.6 W and 1.86 W, respectively. Even though all design parameters of the SMES magnet in case of operating current of 360 A were in the restricted conditions, V-I loss of SMES magnet showed a tendency to generate at local DPCs, which are located on the top and the bottom of the SMES magnet more than that of the other DPCs.

• Archives of Reconstructive Microsurgery
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2006

The purpose of this study is to determine the effects of selective inducible nitric oxide synthase (iNOS) inhibitor N-[3-aminomethyl]benzyl]acetamidine (l400W) on the reperfused cremaster muscle. The extracellular superoxide dismutase knockout ($EC-SOD^{-/-}$) mice was used to make the experimental window for ischemia-reperfusion injury. The muscle was exposed to 4.5 h of ischemia followed by 90 min of reperfusion and the mice received either 3 mg/kg of 1400W or the same amount of phosphate buffered saline (PBS) subcutaneously at 10 min before the start of reperfusion. The results showed that 1400W treatment markedly improved the recovery of the vessel diameter and blood flow in the reperfused cremaster muscle compared to that of PBS group. Histological examination showed reduced edema in the interstitium and muscle fiber, and reduced nitrotyrosine formation (a marker of total peroxinitrite ($ONOO^-$) in 1400W-treated muscle compared to PBS. Our results suggest that iNOS and $ONOO^-$ products are involved in skeletal muscle I/R injury. Reduced I/R injury by using selective inhibition of iNOS is perhaps via limiting cytotoxic $ONOO^-$ generation, a reaction product of nitric oxide (NO) and superoxide anion ($O_2^-$). Thus, inhibition of iNOS appears to be a good treatment strategy in reducing clinical I/R injury.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.504-515
• /
• 1997

In this paper, interference of non-GSO/MSS system into M/W radio stations has been analyzed as two aspects. One is that PDF(Power Flux Density) levels, which are received by M/W radio stations from non-GSO satellites, were simulated and compared with the threshold level specified in ITU-R SF.357. The other is that C/I values, which have been utilized in estimating interference between conventional fixed services, were simulated and analyzed by means of calculating excess time percent and duration below the C/I protection ratio. As the results, it was shown that interference levels received by M/W stations from non- GSO/MSS satellites don't exceed above the threshold level at all, even if changing parameters related with M/W stations. In addition, the excess percent time below the interference protection ratio is a long term of 32% in the case of Iridium interfering into a M/W stations route, but only a short term of 1.71% in the case of Globalstar interfering into a M/W stations route.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.303-313
• /
• 2015

Titrated extract of Centella asiatica (TECA), which is poorly soluble in water is well known for wound healing and anti wrinkle agent. This study was conducted to find the optimum condition for the preparation of water in oil in water ($W_1/O/W_2$) emulsion containing TECA. Solubility of TECA were measured by UV spectrophotometer. 2.55 g of TECA was dissolved in solution composed of dipropylene glycol (40.0 g), ethanol (20.0 g), and water (10.0 g). Factors affecting stability of the emulsions ($W_1/O$, $W_1/O/W_2$) was investigated. The optimum conditions for the preparation of $W_1/O$ emulsion was composed of dipropylene glycol : ethanol : water : TECA in a weight ratio of 40.0 : 20.0 : 10.0 : 2.5 for water phase and squalane : cetyl PEG/PPG-10/1 dimethicone : cetearyl alcohol in a weight ratio of 22.5 : 4.0 : 2.5 for oil phase. The optimum conditions for the preparation of $W_1/O/W_2$ multiple emulsion was composed of water : $W_1/O$ emulsion : polysorbate 80 : carbomer : triethanolamine in a weight ratio of 55.8 : 40.0 : 4.0 : 0.1 : 0.1.

• Journal of the Korean earth science society
• /
• v.27 no.6
• /
• pp.695-700
• /
• 2006

We present B, V, I time series CCD photometry for the variable star TU UMi to classify its variable type. The observations were performed using 61cm telescope equipped with 2K CCD camera at Sobaeksan Optical Astronomy Observatory (SOAO). Judging from the amplitude ratio $({\Delta}i/{\Delta}v)$ and color variation $({\Delta}(b-v),\;{\Delta}(v-i))$. TU UMi should be a W UMa type eclipsing binary. We obtained two primary times of minimum lights (HJD 2453848.0446, HJD 2453848.2309) from our observations and determined new orbital elements (Min I=HJD 2452500.1344+0.37708907${\times}$E) for TU UMi.