• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.52-68
• /
• 1991

A new propeller series is developed using the newly developed blade section(KH18 section) which behaves better cavitation characteristics and higher lift-drag ratio at wide range of angle-of-attack. The pitch and camber distributions are disigned in order to have the same radial and chordwise loading distribution with the selected circumferentially averaged wake input. Since the geometries of the series propeller, such as chord length, thickness, skew and rate distribations, are selected by regression of the recent full scale propeller geometric data, the performance prediction of a propeller at preliminary design stage can be mure realistic. Number of blades of the series propellers is 4 and the expanded blade area ratios are 0.3, 0.45, 0.6 and 0.75. Mean pitch ratios are selected as 0.5, 0.65, 0.8, 0.75 and 1.1 for each expanded area ratio. The new propeller series is composed of 20 propellers and is named as KD(KRISO-DAEWOO) propeller series. Propeller open water tests are performed at the experimental towing tank, and the cavitation observation tests and fluctuating pressure measurements are carried out at the cavitation tunnel of KRISO. $B_{P}-\delta$ curves, which can be used to select the optimum propeller diameter at the preliminary design stage, are derived from a regression analysis of the propeller often water test results. The KD-cavitation chart is derived from the cavitation observation test results by choosing the local maximum lift coefficient and the local cavitation number as parameters. The caviy extent of a propeller can be predicted more accurately by using the KD-cavitation chart at a preliminary design stage, since it is derived from the results of the cavitation observation tests in the selected ship's wake, whereas the existing cavitation charts, such as the Burrill's cavitation chart, are derived from the test results in uniform flow.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.30-41
• /
• 2015

This study was prepared by varying the type of barley sikhye to promote the use of barley. to learn the quality characteristics of traditional beverage sikhye, sikhyes were made out of different kinds of barley such as amethyst barley, black naked barley, tetrastichum barley, tetrastichum waxy barley, naked barley and naked waxy barley. The result of the study is as following. Regarding the length/width ratio of barley grain, black naked barley was the biggest; while amethyst barley was the smallest. Moisture content of barley grain was in the range of 54.96~71.74%. The saccharification liquid pH was in the range of 5.40~5.63 and the soluble solid content was in the range of 15.37~18.73 brix %. The saccharification liquid of sikhye made of tetrastichum waxy barley had the highest soluble solid content; while the saccharification liquid of sikhye made of black naked barley had the lowest soluble solid content. Reducing sugar was in the range of 4.35~7.42 mg/ 100 g; at which tetrastichum waxy barley sikhye had the highest reducing sugar while black naked barley sikhye had the lowest reducing sugar. The result of reducing sugar was similar to the result of soluble solid content. Black naked barley had low Lightness, redness and yellowness in its cooked rice grain and saccharification liquid. The result of barley sikhye characteristics was as following. Black naked barley had the strongest fullness while tetrastichum waxy barley had the weakest fullness. Black naked barley had strong feeling after swallowing the barley rice grain; while tetrastichum waxy barley had weak feeling after swallowing the barley rice grain. The result of feeling after swallowing the barley rice grain had correlation with fullness. The result of preference test was as following. naked waxy barley sikhye and naked barley sikhye had best outlook. In the smell, amethyst barley sikhye was the best. regarding texture, naked barley sikhye and naked waxy barley sikhye had high preference. In overall preference, naked barley sikhye was the best. Like above, there were differences in quality in sikhyes dependent on the variety of barley. In particular, tetrastichum waxy barley and naked barley will be able to increase the amount of sweetness without malt production during sikhye.

• Economic and Environmental Geology
• /
• v.8 no.3
• /
• pp.147-164
• /
• 1975

19 amphibolite samples from the Precambrian Sobaegsan metamorphic belt including the Ogbang mine amphibolites were analyzed for 24 elements each, by wet chemical and emission spectroscopic methods. All the chemical data were evaluated by the methods outlined by Evans and Leake(1960) and Leake(1964) and by Shaw and Kudo(1965). The chemical similarity of all the studied rocks analyzed to basic igneous rocks is consistently indicated particularly by trace element abundance and variation trends. Petrography and oxidation ratios were also considered in attempting to determine the nature of the parent rocks. 3 analyses of W-bearing mafic metamorphic rocks from Sangdong area of the Ogcheon geosynclinal zone are also presented and discussed. Geochemical data for these latter rocks have been possibly derived from mafic tuffs deposited in an area of carbonate deposition.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.295-303
• /
• 1997

To investigate the transformation characteristics of nitrogen and carbon from cow manure compost amended in soil under different moisture conditions, dynamics of nitrogen and carbon were determined periodically for 15 weeks of aerobic incubation at room temperature during July${\sim}$November, 1996. Cow manure compost matured with mixing saw dust was amended with the 4 ratios (0, 2, 4, 6%(wt/wt)) in Ap horizon soil, which collected from green house in Yesan, Chungnam. Moisture was controlled with 0.2, 0.3, 0.4, and 0.5 of mass water conte nt (${\theta}$m) to air dried soil, and water loss was compensated at every sampling. During incubation, soil pH was decreased continuously, that was caused by hydrogen generated from nitrification of ammonium nitrogen. And pH became higher with inclining cow manure compost amendment and water treatment, that meaned the increase of mineralization of organic-N to $NH_4\;^+-N$. Total nitrogen was reduced with increasing water content, but total carbon showed the contrast tendency with that of nitrogen. Therefore, C/N ratio slightly decreased in the low water condition (${\theta}$m 0.2) during incubation, but increased continuously in high water condition over ${\theta}$m 0.4. As a result, it was assumed that soil fertility is able to be reduced in the high water content over available water content. Nitrate transformation rate increased lasting in the low water content less than ${\theta}$m 0.3. Itdropped significantly in the first $2{\sim}3$ weeks of incubation over ${\theta}$m 0.4. In particular, nitrate was not detected in ${\theta}$m 0.5 of water content after the first $2{\sim}3$ weeks. In contrast, ammonium transformation was inclined with increasing water treatment. Nitrogen mineralization rate, which calculated with percentage ratio of (the sum of ex.$NH_4\;^+-N$ and $NO_3\;^--N$)/total nitrogen, was continuously increased in the low water content of ${\theta}$m 0.2 and 0.3. But it saw the different patterns in high water content over ${\theta}$m 0.4 that was drastically declined in the initial stage and then gradually inclined . From the above results, nitrogen transformation patterns differentiated decisively in water content between ${\theta}$m 0.3 and 0.4 in soil. Thus, it is very important for the maintain of suitable soil water content to enhance fertility of soil amended with manure compost. However, excess treatment of manure compost might enhance the possibility of contamination of small watershed and ground water around agricultural area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.47-56
• /
• 2020

In this study, three levels of W/B(Water to Binder) ratio (0.37, 0.42, 0.47) and substitution ratio of GGBFS (Ground Granulated Blast Furnace Slag) rate (0 %, 30 %, 50 %) were considered to perform RCPT (Rapid Chloride Diffusion Test) at the 1,095 aged day. Accelerated chloride diffusion coefficient and passed charge of each concrete mixture were assessed according to Tang's method and ASTM C 1202, and improving behaviors of durability performance with increasing aged days are analyzed based on the test results of previous aged days from the preceding study. As the age of concrete increases, the passed charge and diffusion coefficient have been significantly reduced, and especially the concrete specimens containing GGBFS showed a significantly more reduction than OPC(Ordinary Portland Cement) concrete specimen by latent hydraulic activity. In the case of OPC concrete's results of passed charge, at the 1,095 days, two of them were still in the "Moderate" class. So, if only OPC is used as the binder of concrete, the resistance performance for chloride attack is weak. In this study, the time-parameters (m) were derived based on the results of the accelerated chloride diffusion coefficient, and the deterministic and probabilistic analysis for service life were performed by assuming the design variable as a probability function. For probabilistic service life analysis, durability failure probabilities were calculated using Monte Carlo Simulation (MCS) to evaluate service life. The service life of probabilistic method were lower than that of deterministic method, since the target value of PDF (Probability of Durability Failure) was set very low at 10 %. If the target value of PDF suitable for the purpose of using structure can be set and proper variability can be considered for each design variable, it is believed that more economical durability design can be made.

• Journal of the Korean Society of Radiology
• /
• v.4 no.1
• /
• pp.5-9
• /
• 2010

In recent, a digital x-ray detector attracted worldwide attention and there are many studies to commercialize. There are two methods in digital x-ray detector. This method is an Indirect method and Direct method. This study is to see the differences between the digital x-ray detector based on a-Se used in the existing indirect conversion method and an x-ray conversion material that has better SNR(Signal-to-noise ratio) and property than the a-Se. To solve the problem that is difficult to make a large area film using Screen-Print method, we used a Screen-Print method. In this study, we used a polyclystal $HgI_2$ as x-ray conversion material and a sample thickness is $150{\mu}m$ and an area is $3cm{\times}3cm$. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a Magnetron Sputtering System and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$ and then we evaluated darkcurrent, sensitivity and SNR of the $HgI_2$ film are measured, then we evaluated the electrical properties. And we used a current integration mode when I-V test. This experiment shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high darkcurrent. Through fabricating of various thicknesses and optimal electrodes, we will optimize SNR in the future work.

• Journal of Life Science
• /
• v.21 no.2
• /
• pp.322-327
• /
• 2011

The effects of green tea consumption and/or exercise for 12weeks on body weight and select biochemical markers in plasma were evaluated in obese adolescents with a fat ratio of greater than 25%. The subjects were randomly divided into a control group (n=9), green tea consumption group (n=9), exercise group (n=9) and green tea consumption with exercise group (n=9). Subjects in both green tea consumption group and green tea consumption with exercise group were given more than five cups of green tea extract in hot water ($90^{\circ}C$) daily, equivalent to 1.5-1.7 g dry green tea, for 12 weeks. Subjects in both the exercise group and green tea consumption with exercise group participated in a training program (HRmax 60-70%, 60 min/day) for 12 weeks. Control subjects were only given water equal to the quantity of green tea being given to the subjects of green tea consumption. No significant changes body weights were seen in any of these treatments, but the waist to hip ratio was reduced with treatments of both green tea and exercise. The control group showed no significant changes in TNF-$\alpha$, IL-6 and leptin levels. Green tea consumption reduced leptin (p<0.05), TNF-$\alpha$, and leptin levels. Exercise lowered TNF-$\alpha$ (p<0.05), IL-6 (p<0.01), and leptin (p<0.05) concentrations. Meanwhile, a combination of green tea consumption and exercise lowered TNF-$\alpha$, IL-6 (p<0.05) and leptin (p<0.05) levels. These results indicate that green tea consumption and exercise both had a positive effect on the reduction of inflammatory cytokines, TNF-$\alpha$, IL-6 and leptin, in obese adolescents, but no synergistic effect on the reduction of these cytokines.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.63-70
• /
• 2012

This study was conducted to investigated the distribution, ecological character and life cycle of Black Soldier Fly(BSF), Hermetia illucens, to determine effects of BSF on composing ability to the livestock feces. The distribution of BSF was defined in all parts of the country in Korea. Its main habitat was found to be areas near cattle sheds, feces sheds, living waste dump grounds, and food waste dump grounds. Excellent species of the bio-conversion using the livestock feces were selected out of two kinds of solider flies(Hermetia illucens and Ptecticus tenebrifer). And effects of BSF on composing ability to the livestock feces were pig feces 0.5 g, cattle feces 0.43 g and chicken feces 0.3 g per a larvae of BSF. In the examination of the ability of BSF to decompose food waste, volume of the livestock feces decreased by weight pig feces 77, cattle feces 83.62 and chicken feces 80%. Observed characteristics of BSF larvae and pupae stage were by developmental stage may be summarized as follows: size and length of larvae and pupae of BSF were higher than in pig feces and mixed sawdust treatments. In order to develop artificial indoor rearing techniques, The pupation and emergence rate were not visible the difference but important factor of the mating and egg-laying was a sun light. And it was visible the difference in mating ratio. Mating rate of H. illucens by seasonal change was the highest from May to July. Mating mostly occurred between 10 : 00 and 12 : 00 during which light intensity is high. As the egg-laying medium for artificial egg collection, calf feed and food waste were most effective. The ratio of egg-laying medium is waste food : sawdust(1 : 1) in volume. For egg-laying materials, flower foam and wood with holes were used; holes sized 3 ~ 5 mm in diameter, 7 ~ 10 mm in depth were most preferred for egg-laying.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.101-114
• /
• 2008

Pressurized grouting is a common technique in geotechnical engineering applications to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressurized grouting has been applied to a soil-nailing system which is widely used to improve slope stability. Because interaction between pressurized grouting paste and adjacent ground mass is complicated and difficult to analyze, the soil-nailing design has been empirically performed in most geotechnical applications. The purpose of this study is to analyze the ground behavior induced by pressurized grouting paste with the aid of laboratory model tests. The laboratory tests are carried out for four kinds of granitic residual soils. When injecting pressure is applied to grout, the pressure measured in the adjacent ground initially increases for a while, which behaves in the way of the membrane model. With the lapse of time, the pressure in the adjacent ground decreases down to a value of residual stress because a portion of water in the grouting paste seeps into the adjacent ground. The seepage can be indicated by the fact that the ratio of water/cement in the grouting paste has decreased from a initial value of 50% to around 30% during the test. The reduction of the W/C ratio should cause to harden the grouting paste and increase the stiffness of it, which restricts the rebound of out-moved ground into the original position, and thus increase the in-situ stress by approximately 20% of the injecting pressures. The measured radial deformation of the ground under pressure is in good agreement with the expansion of a cylindrical cavity estimated by the cavity expansion theory. In-situ test revealed that the pullout resistance of a soil nailing with pressurized grouting is about 36% larger than that with regular grouting, caused by grout radius increase, residual stress effect, and/or roughness increase.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.689-694
• /
• 2003

Weight records of Hanwoo cows from birth to 36 months of age collected in Daekwanryeong branch, National Livestock Research Institute(NLRI) were fitted to Gompertz, von Bertalanffy and Logistic functions. For the growth curve parameters fitted on individual records using Gompertz model, the mean estimates of mature weight(A), growth ratio(b) and growth rate(k) were 383.42 ${\pm}$ 97.29kg, 2.374 ${\pm}$ 0.340 and 0.0037 ${\pm}$ 0.0012, respectively, and mean estimates of body weight, age and daily gain rate at inflection were 141.05 ${\pm}$ 35.79kg, 255.63 ${\pm}$ 109.09 day and 0.500 ${\pm}$ 0.123kg, respectively. For von BertalanfTy model, the mean estimates of A, b and k were 410.47 ${\pm}$ 117.98kg, 0.575${\pm}$0.057 and 0.003 ${\pm}$ 0.001, and mean estimates of body weight, age and daily gain at inflection were 121.62 ${\pm}$ 34.94kg, 211.02 ${\pm}$ 105.53 and 0.504 ${\pm}$ O.l24kg. For Logistic model, the mean estimates of A, b and k were 347.64 ${\pm}$ 97.29kg, 6.73 ${\pm}$ 0.34 and 0.006 ${\pm}$ 0.0018, and mean estimates of body weight, age and daily gain at inflection were 173.82 ${\pm}$ 37.25kg, 324.47 ${\pm}$ 126.85 and 0.508 ${\pm}$ 0.131kg. Coefficients of variation for the A, b and k parameter estimates were 25.3%, 14.3% and 32.4%, respectively, for Gompertz model, 28.70/0, 9.9% and 33.3% for von Bertalanffy model, and 27.9°/0, 5.0% and 30.0% for Logistic model.