• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.197-200
• /
• 2000

In this paper, The RF system of W-CDMA receiver is designed and the performance is analyzed. The linearity characteristic and the noise characteristic are presented in the performance. The linearity characteristic is analyzed by PN and IIP3. The noise characteristic is analyzed by NF. In addition, sweeping of the nonlinear components parameter affecting the linear performance is tested and the most maximal possible parameter to maintain the linear performance is introduced. The transceiver RF system of W-CDMA and cdma2000 is designed and presented adapting the nonlinear parameter introduced.

• 한국정보과학회논문지:데이타베이스
• /
• 제31권4호
• /
• pp.373-383
• /
• 2004

대량의 데이타를 관리하는 현대 데이타베이스 시스템 환경에서는 데이타베이스 시스템 튜닝에 대한 중요성이 증가하고 있다. 특히, 데이타베이스 시스템 성능 인자(performance parameters)를 시스템부하에 따라 적절하게 튜닝하여야 한다. 본 논문에서는 TPC-W 환경에서 데이타베이스 시스템의 단일 성능 인자 튜닝 전략 2가지(처리량 평가 방법, 응답시간 평가 방법)를 제시한다. 효과성을 입증하기 위하여 제시한 튜닝 전략은 두 개의 상용 데이타베이스 시스템에 적용하였다. 실험 결과는 제시된 튜닝 전략이 성능 향상에 기여함을 보인다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1091-1094
• /
• 2005

This paper formulates the parameter estimation of cornering behavior of a vehicle. Especially some vehicle parameter is very important on stability control of chassis by ECU, but some parameter is so hard to get by sensor which parameter is included the nonlinear characteristic of tire cornering force. So we need to deduce that parameter from used signal and numerical method. In this study, we propose a estimation method and present the simulation by parameter estimation technique.

• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.239-243
• /
• 2008

Ni-W(1-5 at.%) alloy rods were made by powder metallurgy process including powder mixing, compacting and subsequent sintering. Ni and W powder of appropriate compositions were mixed by a ball milling and isostatically pressed in a rubber mold into a rod. The compacted rods were sintered at $1000^{\circ}C-1150^{\circ}C$ at a reduced atmosphere for densification. The lattice parameters of Ni-W alloys were estimated by a high resolution neutron powder diffractometer. All sintered rods were found to have a face centered cubic structure without any impurity phase, but the diffraction peak locations were linearly shifted with increasing W content. The lattice parameter of a pure Ni rod was $3.5238{\AA}$ which is consistent with the value reported in JCPDS data. The lattice parameter of N-W alloy rods increased by $0.004{\AA}$ for 1 atomic % of W, which indicates the formation of a Ni-W solid solution due to the substitution of nickel atoms by tungsten atoms of larger size.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.344-352
• /
• 1993

The purpose of this study is to investigate the possibility of the non-destructive quality evaluation for food by the acoustic non-linear parameter B/A which is a measure of the non-linearity of the state equation of the medium in terms of pressure and density. The B/A of water, corn oil O/W(oil in water) emulsion and milk were measured by using a sound velocity measuring system. The B/A value of water was measured for ascertaining reliability of our experimental system. Corn oil W/W emulsion was prepared as a model of milk . It was proved that the B/A value of O/W emulsion was related to the oil concentration by a law of mixture. We applied this result to milk and obtained satisfactory results for predicting the milk fat concentration.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.418-422
• /
• 2001

To achieve a high performance in direct vector control of induction motor, it is essential to correct estimation of rotor flux. The accuracy of flux observers for induction machines inherently depends on parameter sensitivity. This paper presents an analysis method for conventional flux observers using Parameter Sensitivity. The Parameter sensitivity is defined as the ratio of the percentage change in the system transfer function to the percentage change of the parameter variation. We define the ratio between real flux and estimated flux as the transfer function, and analyzed a parameter sensitivity of this transfer function by simulation.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2158-2173
• /
• 2004

In this paper, the higher order terms in the crack tip stress fields are investigated macroscopically for more realistic assessment of structural material behaviors. For reactor pressure vessel material of A533B ferritic steel, effects of crack size and temperature have been evaluated using 3-point SENB specimens through a series of finite element analyses, tensile tests and fracture toughness tests. The T-stress, Q-parameter and q-parameter as well as the K and J-integral are calculated and mutual relationships are investigated also. Based on the evaluation, it has proven that the effect of crack size from standard length (a/W=0.53) to shallow length (a/W=0.11) is remarkable whilst the effect of temperature from -20$^{\circ}C$ to -60$^{\circ}C$ is negligible. Finally, the cleavage fracture toughness loci as a function of the promising Q-parameter or q-parameter are developed using specific test results as well as finite element analysis results, which can be applicable for structural integrity evaluation considering constraint effects.

• 대한화장품학회지
• /
• 제47권4호
• /
• pp.273-280
• /
• 2021

자외선차단 제형은 내수성이 중요하므로 수상이 유상에 분산되는 water-in-oil (W/O) 에멀젼으로 만드는 것이 바람직하다. 이 경우에는 오일 특유의 무겁고 끈적이는 사용감 때문에 이를 보완하는 방법으로 실리콘계 오일을 사용한다. 이러한 오일은 유기 자외선차단제와의 상용성이 낮아 에멀젼의 안정성에 문제가 되고 있다. 본 연구에서는 자외선차단 제형의 W/O 에멀젼에서 다양한 오일들 간의 상용성을 Hansen solubility parameter(HSP)를 이용하여 수치적으로 도출하였다. HSP는 물질의 분산, 극성 및 수소 결합을 나타내는 지표로 물질간의 상용성을 판단하는데 유용하다. 본 연구에서는 HSP가 다른 다양한 오일을 선정하여 W/O 에멀젼을 제조하고 제형의 시간에 따른 점도 변화 및 안정성을 조사하여 HSP 수치와의 상관관계 또는 일치성을 고찰하였다. HSP를 이용하면 상용성이 높은 오일 선택을 용이하게 할 수 있었다. 또한, W/O 에멀젼에서 유상의 상용성이 높으면 점도의 경시변화가 작았으며 freeze-thaw cycle (-15 ℃ ~ 45 ℃) 조건에서 안정성이 향상된 것을 확인하였다. 향후 HSP를 통해 성분 구성을 최적화한다면 사용감이 우수하면서 안정성을 확보한 W/O형 자외선차단 제형 개발에 도움이 될 것이라 기대된다.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.233-241
• /
• 2007

A lumped parameter model is proposed for the analysis of dynamic behaviour of a Passive Hydraulic Engine Mount (PHEM), incorporating inertia track and throttle, which is characterized by effective and efficient vibration isolation behaviour in the range of both low and high frequencies. Most of the model parameters, including volume compliance of the throttle chamber, effective piston area, fluid inertia and resistance of inertia track and throttle are identified by an experimental approach. Numerical predictions are obtained through a finite element method for responses of dynamic stiffness of the rubber spring. The experiments are made for the purpose of PHEM validation. Comparison of numerical results with experimental observations has shown that the present PHEM achieves good performance for vibration isolation.

• 한국소음진동공학회논문집
• /
• 제13권4호
• /
• pp.281-289
• /
• 2003

Recently, as high-rise buildings increase steeply, sub-structures of them are often supported on in-homogeneous foundation. And there are many machines in sub-structures of buildings, and slabs of sub-structures are affected by vibration which they make. This paper deals with vibration of plates with concentrated masses on in-homogeneous foundation. Machines on plates are considered as concentrated masses. In-homogeneous foundation is considered as assigning $k_{w1}$ and $k_{w2}$ to Winkler foundation parameters of central region and side region of plate respectively, and foundation is idealized to use Pasternak foundation model which considered both of Winkler foundation parameter and shear foundation parameter. In this paper, applying Winkler foundation parameters which $k_{w1}$and $k_{w2}$ are 10, $10^2$, $10^3$ and shear foundation parameter which are 10, 20 respectively, first natural frequencies of thick plates with concentrated masses on in-homogeneous foundations are calculated.