• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.955-962
• /
• 2016

In this paper, we propose a design method for speed controller, current control of a Brushless Direct Current(: BLDC) motor using disturbance rejection techniques. Disturbance assumes a back electromotive force occurring in the electrical system and the variation of the load acting on the rotary shaft from the outside of the motor. And it assumed to be constant during the time interval and the Luenberger's observer design. So that the error of the observer about the system status can converge to zero show how to set the appropriate gain. Further, to stabilize the whole system, and proposes a method for setting the appropriate PI gain control to improve the tracking performance. By applying the proposed controller to 120W BLDC motors were tested for the ability to follow the velocity and current reference. Since the simulation results of the steady state error is within 0.1%, we were able to show the usefulness of the tracking performance of the proposed controller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1677-1685
• /
• 2001

In this paper, we propose a call admission control scheme that can be performed within guaranteeing of required QoS(Quality of Services) in DS-CDMA(Direct Sequence-Code Division Multiple Access) reverse link. It has been performed rely on a physical channel numberonly and based on quality of received signal from MODEM(modulator/demodulator) part in established study. In other methods, the standard for services would have been set from statistical analysis of users\` location and using received power level in BTS(Base Transceiver Station). These ways bring about not only system loads but time delay or great differences from real environment. To solve these problems, we propose a call drop rate estimation algorithm for the purpose of call admission control based on measured value at LNA(Low Noise Amplifier) ports of BTS(Base Transceiver Station) in real time. This method proposed in this paper estimates a quality of offered service in real time, reduce system loads and shorten time delay which is needed to determine the standard for call admission control. But it requires a additional 17W complexity which can measure received signal power in BTS and estimate call drop rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.29-42
• /
• 1990

In this paper, We use the APL as IDL when simulation a 16-bit SIP. It was possible for IDL to represent and describe a structure of a H/W which other HDL have not. Because We partitioned whole system to various modules when desingning processor, We adpoted a direct decoding method. A designed each modules are executed according to 12-bit control word was inputed through experimental framework, Which were composed to symbolized instructions. In here, By setting instruction codes of the SIP using binary code, We composed instruction format and assembler instruction, and verified the SIP behaviour that try to implement by entering a presented instruction set through experimental framework. In a presented SIP, Because inputing program are a symbolized language, Designer and user will easily understand behaviour of system. Especially, Because we can immediatly specify a unit function within SIP, We will use variously and easily the library cell.

• Journal of ILASS-Korea
• /
• v.28 no.1
• /
• pp.43-48
• /
• 2023

The waste-heat-recovery boiler with water spray (HR-B/WS) applies the heat exchange between the inlet air and exhaust gas with the water spray into the inlet air. The evaporation of water in the inlet air promotes heat recovery from the exhaust gas so that thermal efficiency can be improved by the enhanced condensing effect. The NOx emission can also be reduced by lowering the flame temperature due to the dilution effect of the water. In this study, the validity of this concept is examined by the practical boiler test performed with a 24 kW condensing boiler under the full load condition according to the water injection amount. The theoretical amount of water injection is calculated under the assumption of full evaporation of the sprayed water, which is calculated as 50 g/min. Since the injected water cannot evaporate fully in the actual system, the maximum water spray amount is set as 100 g/min. The results showed that the water injection can increase the thermal efficiency up to 95.59% and reduce NOx and CO emissions simultaneously to 8.9 ppm and 35 ppm at 0% of O₂. Although the heat energy loss increased due to the unevaporated water, the increase in water injection amount caused higher thermal efficiency due to the increased amount of the evaporated water.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3628-3633
• /
• 2012

This paper proposes a model of the real time monitoring system based on Ubiquitous Sensor Network (USN) for the detection and prediction of landslides. For this purpose, the real time monitoring system with tilting sensor and USN was set up and the performance was conducted. The performance was accomplished by conducting both field examinations and the experimental evaluation of the monitoring system. The results of this study show that the angle $0^{\circ}$, $-10^{\circ}$, $-20^{\circ}$ and $0{\sim}-30^{\circ}$ of sensor position detected by the sensor module coincide with the data measured from USN monitoring system by giving a sampling time 100[msec]. Consequently, the proposed model of the real time monitoring system with tilting sensor based on USN will be widely used as a monitoring system in the exposure to dangerous landslide regions.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.31-47
• /
• 2008

As OWL(Web Ontology Language) has been selected as a standard ontology description language by W3C, many ontologies have been building and developing in OWL. The lena developed by HP as an Application Programming Interface(API) provides various APIs to develop inference engines as well as storages, and it is widely used for system development. However, the storage model of Jena2 stores most owl documents not acceptable into a single table and it shows low processing performance for a large ontology data set. Most of all, Jena2 storage model does not consider hierarchical structures of classes and properties. In addition, it shows low query processing performance using the hierarchical structure because of many join operations. To solve these issues, this paper proposes an OWL ontology relational database model. The proposed model semantically classifies and stores information such as classes, properties, and instances. It improves the query processing performance by managing hierarchical information in a separate table. This paper also describes the implementation and evaluation results. This paper also shows the experiment and evaluation result and the comparative analysis on both results. The experiment and evaluation show our proposal provides a prominent performance as against Jena2.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.180-194
• /
• 2017

Agricultural hazards management technology, which would allow individual farms to respond preemptively, has been developed. A preliminary system developed in the previous study provides precise weather forecasts by farms, notification of weather hazards by crops and delivery of response guidelines (http://www.agmet.kr). Although the GIS map-based alarm system has been implemented for a number of farmers and their farms, its user interface was not designed for individual users who seek information at their farms. In this study, we have developed a mobile application to provide early warnings of weather hazards up to 10 days in advance. A set of information including field-specific weather, crop growth stages and weather hazard alerts can be delivered to individual farmers through their mobile phone. This would guide users to access the map-based system using their smartphone to obtain field-specific weather information by the growth stage of cultivated crops. This would help the farmers make the better use of the existing weather-hazard GIS map-based alarm system.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.459-467
• /
• 2016

Due to the limited areal space for installation, borehole heat exchangers (BHEs) at depths deeper than 300 m are considered for geothermal heating and cooling in the urban area. The deep vertical closed-loop BHEs are unconventional due to the depth and the range of the typical installation depth is between 100 and 200 m in Korea. The BHE in the study consists of 50A (outer diameter 50 mm, SDR 11) PE U-tube pipe in a 150 mm diameter borehole with the depth of 300 m. In order to compensate the buoyancy caused by the low density of PE pipe ($0.94{\sim}0.96g/cm^3$) in the borehole filled with ground water, 10 weight band sets (4.6 kg/set) were attached to the bottom of U-tube. A thermal response test (TRT) and fundamental basic surveys on the thermophysical characteristics of the ground were conducted. Ground temperature measures around $15^{\circ}C$ from the surface to 100 m, and the geothermal gradient represents $1.9^{\circ}C/100m$ below 100 m. The TRT was conducted for 48 hours with 17.5 kW heat injection, 28.65 l/min at a circulation fluid flow rate indicates an average temperature difference $8.9^{\circ}C$ between inlet and outlet circulation fluid. The estimated thermophysical parameters are 3.0 W/mk of ground thermal conductivity and 0.104 mk/W of borehole thermal resistance. In the stepwise evaluation of TRT, the ground thermal conductivity was calculated at the standard deviation of 0.16 after the initial 13 hours. The sensitivity analysis on the borehole thermal resistance was also conducted with respect to the PE pipe diameter and the thermal conductivity of backfill material. The borehole thermal resistivity slightly decreased with the increase of the two parameters.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.435-444
• /
• 2006

Since artificial space objects are observable only in a short period of time and the characteristics of their motion is not exactly predictable, it is difficult to obtain both photometric and spectroscopic data by a set of observations. We have, therefore, designed a mount to load multi-optical instruments on the Kyung Hee University (KHU) satellite tracking and observation system for both photometric and spectroscopic observations of artificial space objects. In this paper, we have calculated the deformation of the remodeled mount using structural analyses for the loading of the multi-optical instruments. We have also deduced pointing errors of the mount occurring at tracking and observing artificial space objects. we have derived tracking reliably artificial space objects in our field of view and confirmed structural safety test of mount utilizing equivalent (von-mises) stress distribution.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.1
• /
• pp.27-34
• /
• 2010

Web crawlers are fundamental programs which iteratively download web pages by following links of web pages starting from a small set of initial URLs. Previously several web crawling orderings have been proposed to crawl popular web pages in preference to other pages, but some graph search techniques whose characteristics and efficient implementations had been studied in graph theory community have not been applied yet for web crawling orderings. In this paper we consider various graph search techniques including lexicographic breadth-first search, lexicographic depth-first search and maximum cardinality search as well as well-known breadth-first search and depth-first search, and then choose effective web crawling orderings which have linear time complexity and crawl popular pages early. Especially, for maximum cardinality search and lexicographic breadth-first search whose implementations are non-trivial, we propose linear-time web crawling orderings by applying the partition refinement method. Experimental results show that maximum cardinality search has desirable properties in both time complexity and the quality of crawled pages.