• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.63-63
• /
• 2018

본 연구는 플라즈마 전해 산화 (PEO) 및 RF (Radio Frequency) 스퍼터링을 이용한 2 단계 접근법에 의해 처리 된 MgO / Ni-Cr의 고내식성 이중층 코팅을 제조하기 위해 수행되었다. 이를 위해 $100mA/cm^2$ 교류 조건에서 180 s PEO를 한 후 150W 에서 900s RF 스퍼터링을 수행 하였다. 코팅의 형태는 주사전자현미경(SEM)을 사용하여 관찰되었으며 코팅의 상조성은 X-선 회절(XRD) 및 X-선 광전자 분광법(XPS)을 사용하여 분석하였다. SEM 이미지는 스퍼터링 된 Ni-Cr이 크랙의 대부분과 미세한 미세 공극을 덮어 코팅 결함이 감소함을 보여 주었다. 따라서, 코팅 된 샘플의 거칠기 값은 스퍼터링 공정 후에 감소되었다. 단면 이미지로부터, 스퍼터링된 코팅층은 낮은 두께 때문에 거의 검출되지 않았다. EDS, XRD 및 XPS를 사용한 조성 분석은 금속 상태의 형태로 Ni 및 Cr 존재를 나타내었고 XPS에서 NiCr2O4 부동태 피막이 검출되었다. MgO / Ni-Cr 이중층 코팅의 내부식성은 MgO / Ni-Cr 이중층을 가진 샘플의 금속 원소와 비교하여 우수한 부식 특성을 나타내는 전위 역학적 분극 시험 및 전기 화학적 임피던스 분광법으로 평가 하였다.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.181-186
• /
• 2015

In this study, the effect of the friction stir welding (FSW) was compared with that of the gas tungsten arc welding (GTAW) on the microstructure and microhardness of Cu-Ni alloy weldment. The weldment of 10 mm thickness was fabricated by FSW and GTAW, respectively. Both weldments were compared with each other by optical microstructure, microhardness test and grain size measurement. Results of this study suggest that the microhardness decreased from the base metal (BM) to the heat affected zone (HAZ) and increased at fusion zone (FZ) of GTAW and stir zone (SZ) of FSW. the minimum Hv value of both weldment was obtained at HAZ, respectively, which represents the softening zone, whereas Hv value of FSW weldment was little higher than that of GTAW weldment. These phenomena can be explained by the grain size difference between HAZs of each weldment. Grain size was increased at the HAZ during FSW and GTAW. Because FSW is a solid-state joining process obtaining the lower heat-input generated by rotating shoulder than heat generated in the arc of GTAW.

• Journal of Magnetics
• /
• 제7권3호
• /
• pp.94-97
• /
• 2002

The dependence on nickel oxide thickness and a ferromagnetic layer thickness in unidirectional and isotropic exchange-coupled NiO/NiFe(Fe) bilayer films was investigated by magnetic force microscopy to better understand the relation between magnetic domain structure and exchange biasing at microscopic length scales. As the NiO thickness increased, the domain structure of unidirectional biased films formed smaller and more complex in-plane domains. By contrast, for the isotropically coupled films, large domains generally formed with increasing NiO thickness including a cross type domain with out-of plane magnetization orientation. The density of the cross domain is proportional to exchange biasing field, and the fact that the domain mainly originated from the strongest exchange coupled region was confirmed by imaging in an applied external field during a magnetization cycle.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.679-682
• /
• 2002

Layered Na0.7[Ni0.05Mn0.95]O2 compounds have been synthesized by a sol-gel method, using glycolic acid as a chelating agent. Na0.7[Ni0.05Mn0.95]O2 precursors w ere used to prepare layered lithium manganese oxides by ion exchange for Na by Li, using LiBr in hexanol. Powder X-ray diffraction shows the layered Na0.7[Ni0.05Mn0.95]O2 has an O3 type structure, which exhibits a large reversible capacity of approximately 190 mA h g-1 in the 2.4-4.5 V range. Na0.7[Ni0.05Mn0.95]O2 powders undergo transformation to spinel during cycling.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.111-114
• /
• 2001

Short-length and long-length Ni tapes were fabricated by powder processing, cold rolling and recrystallizatioon heat treatment. In the case of the short-length Ni tape, both in-plane and out-of-plane texture were less than $10^{\circ}$. In the case of the long-length Ni tape, the degree of texture is lower than that of the short-length Ni tape. The relationship between the texture formation and the processing parameter is reported.

• 동력기계공학회지
• /
• 제4권1호
• /
• pp.74-80
• /
• 2000

This present study was investigated effect of Ni contents on the high temperature strength characteristic in 9Cr ferritic heat-resistant steel added 1.7%W in place of Mo in order to restraint laves phase formation. Precipitation amount of carbide, number of particle per unit area and particle size of carbide were decreased with increase of Ni content. In the steels, carbides of $M_{23}C_6$ type was mainly precipitated, but laves phases could not precipitated. Tensile and yield strength, creep strength and creep rupture time was decreased, but elongation were increased due to decreasing of particle number per unite area and carbide amount precipitated with increase of Ni content.

• 한국표면공학회지
• /
• 제39권5호
• /
• pp.210-214
• /
• 2006

In order to enhance the electromagnetic shielding efficiency of commercialized cold-rolled steel sheets, we have prepared Ni deposited steel sheets by the electrodeposition method. Surface alloying with Ni and Fe was achieved on a steel sheet by diffusion annealing process. Shielding effectiveness measurement results showed that annealed Ni electrodeposited steel sheets enhanced the shielding efficiency up to about 3 dB in the frequency range of 20 to 200Hz, compared with that of non-deposited steel sheets.

• Bulletin of the Korean Chemical Society
• /
• 제24권7호
• /
• pp.906-910
• /
• 2003

Hydrothermal reactions of Ni(NO₃)₂· 6H₂O with trans-1,2-bis(4-pyridyl)ethylene (bipyen), in the presence of a linear 2,6-naphthalene dicarboxylic acid (NDCH₂) and a bent 4,4'-oxybis(benzoic acid) (OBCH₂), gave a 2-D coordination polymer [Ni(NDC)(bipyen)(H₂O)] (1) and also a 2-D coordination polymer [Ni(OBC)(bipyen)]· H₂O (2), respectively. A reversible de-coordination and re-coordination of an aqua ligand was observed for polymer 1. Polymer 2 has an undulated 2-D network based on 50-membered rectangular grids, each of which has the dimension of 13.61 × 13.17 Å.

• 한국재료학회지
• /
• 제15권11호
• /
• pp.735-740
• /
• 2005

The phase transformation of Ni-B diffusion barrier by Cu diffusion was studied. The Ni-B diffusion barrier, thickness of 10(Inn, was electrolessly deposited on the electroplated Cu interconnect. The specimens were annealed either in Ar atmosphere or in $H_2$ atmosphere from $300^{\circ}C\;to\;800^{\circ}C$ for 30min, respectively. Although the Ni-B coated specimens showed the decomposition of $Ni_3B$ above $400^{\circ}C$ in both Ar atmosphere and $H_2$ atmosphere, Ni-B powders did not show the decomposition of $Ni_3B$. The $Ni_3B$ was decomposed to Ni and B in hi atmospherr: and the metallic Ni formed the solid solution with Cu and the free B was oxidized to $B_2O_3$. However, both the boron hydride and free B were not observed in the diffusion barrier after the annealing in $H_2$ atmos There. These results revealed that the decomposition of $Ni_3B$ by Cu made the Cu diffusion continued toward the Ni-B diffusion barrier.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.55-58
• /
• 2003

FeMn based spin valves often consist of a NiFe/FeMn/NiFe trilayer structure. We have investigated the evolution of exchange bias at the bottom and top interfaces in the NiFe(5nm)/FeMn(x)/NiFe(5nm) trilayer structure as a function of FeMn thickness in the range 3 nm to 30 nm. The XRD results indicate (111) textured growth for NiFe and FeMn layers. The magnetization studies using VSM show two hysteresis loops corresponding to the bottom NiFe seed layer and top NiFe layers with greater bias for the bottom NiFe layer, for FeMn thickness equal to and above 5 nm. The larger exchange bias for the bottom seed layer is confirmed by the surface sensitive MOKE hysteresis loop measurements which show gradual weakening of the MOKE hysteresis loop for the bottom NiFe layer with increasing FeMn thickness. The observed large exchange bias in a spin valve structure is usually attributed to the pinning NiFe layer on top of the FeMn layer, even when a NiFe seed layer of a few nm thickness is present, whereas, in reality it may be arising from the bottom seed layer, as shown by the present study.