• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.11
• /
• pp.1-8
• /
• 2014

Recently, damages resulting from light trespass that affects the human body (sleep) as one of light pollution control elements of outdoor Luminaires equipment are leading to continuous civil complaints and disputes and this is gradually expanding into a social problem. Accordingly, this study considers the need to develop a shielding plate in consideration of light distribution performance as an efficient measure to cope with damages from light trespass. Therefore, this study developed a shielding plate for LED Luminaires with a fine view that maximally inhibited light toward the backlight area compared to existing shielding plates and verified its performance.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.211-218
• /
• 2017

The catch performance of the silver-white jig for automatic jigging machine, developed to improve the effectiveness of LED fishing lamp in catching squid, was compared to that of the conventional green jig. The vessels used in this investigation were Haesong-ho (A-vessel), a training vessel of Gangwon State University and Haengbok-ho (B-vessel), a commercial fishing boat. In the case of the A-vessel, five to eight automatic jigging machines were used in the fishing operation with a 31.3 kW LED fishing lamp in summer. As for the B-vessel, fourteen automatic jigging machines were used with a 43.2 kW LED fishing lamp in autumn and winter. The results showed that the catch performance of the silver-white jig was similar to that of the green jig in the case of the A-vessel (p>0.05). However, in the case of the B-vessel, the catch performance of the silver-white jig was superior to that of the green jig in both winter (p<0.05) and autumn (P<0.001). Based on the catch performance results regarding the B-vessel in autumn, it is expected that the annual income increase that can be earned by using the silver-white jig will be KRW 26,385,000.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.231-238
• /
• 2023

Microporous gel films of 29 m were prepared by the gel drawing of UHMWPE/soybean oil blend (4:6, w/w) up to 800%. The stretched films containing the optimal photoinitiator concentration, depending on the film thickness, was cross-linked under 365 nm LED-UV irradiation and the oil was extracted with n-hexane, resulting in a gel fraction of 95 % or more. With the formation of the cross-linked structure, the melt-down temperature and melt-down elongation increased by 16 ℃ and by 63% respectively. Also the thermal stability of the crosslinked UHMWPE was proved by the area shrinkage under the heat treatment decreased to 3.8 % compared to 17.4 % for the pristine film, and by the reductions in the combustion heat. The enhanced thermal stability of the crosslinked UHMWPE microporous membranes can be used for various industrial applications such as filters, electric vehicles and energy storage systems.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.133-141
• /
• 2010

The protective effect of a mixed powder from solid-cultured and liquid-cultured Lentinus edodes mycelia (2:1, w/w) (designate LED) on the carbon tetrachloride ($CCl_4$)- and ethanol-induced hepatotoxicity of male Sprague-Dawley (SD) rat was investigated. In the $CCl_4$-induced rat hepatotoxicity experiment, rats of 4 groups (6 rats/group) were administere with Normal (0.2 ml distilled water), Control (0.2 ml distilled water), LED (LED 200 mg/kg BW + 0.2 ml distilled water), and Silymarin (200 mg/kg BW + 0.2 ml distilled water), p.o., daily for 2 weeks. Afterwards, all groups except for the Normal group were subjected to abdominal injection with $CCl_4$ ($CCl_4$ : corn oil, 1:1 v/v; 0.5 ml/kg BW). For the ethanol- induced rat hepatotoxicity experiment, rats were divided into 5 groups (5 rats/group): Normal; Pair-fed control (PFC); Control (ethanol); LED (ethanol + LED 200 mg/kg BW); and Silymarin (ethanol + silymarin 200 mg/kg BW). Rats of the Normal and PFC groups were fed a basal liquid diet, and rats of the Control, LED, and Silymarin groups were fed a liquid ethanol diet containing LED or Silymarin. Eight weeks later, blood and liver samples were collected to analyze biomarkers. In $CCl_4$-induced SD rats, LED elevated hepatic superoxide dismutase (SOD), catalase, and glutathione peroxidase (GSH peroxidase) activities and thiobarbituric reactive substances (TBARS) were reduced, resulting in the reduction of glutamate-oxalate transaminase (GOT), glutamate-pyruvate transaminase (GPT) and lactic dehydrogenase (LDH) activities in plasma. Similar results of these enzymes and biochemical markers in both liver tissues and plasma were seen in ethanol-induced hepatotoxicity of SD rats. In addition, elevated alcohol dehydrogenase (ADH) activity and reduced expression of cytochrome p450 mixed monooxygenase enzyme (CYP2E1) were seen in liver tissues from ethanol-treated rats by LED treatment. These effects of LED were similar to those of Silymarin. In in vitro experiments, LED showed antioxidant activity in a 2,2-diphenyl-1-picrylhydrazyl (DPPH) system and mouse liver mitochondria system induced by NADPH/$Fe^{2+}$ and cumine hydroperoxide (CuOOH). These results indicate that LED protected SD rat hepatotoxicity, induced by $CCl_4$ and ethanol, through its antioxidative activity and might be useful as a material for protection from hepatoxicity in humans.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.165.1-165.1
• /
• 2016

표면활성화 접합은 이종 소재의 표면을 제어하여 직접 접합하는 기술이다. 본 연구에서는 표면활성화 접합을 이용하여 고 방열특성의 LED용 히트스프레더(heat spreader)를 제작하기 위하여 $Al-Al_2O_3$ 복합소재를 제조하였다. LED 제품의 히트스프레더는 LED에서 발생하는 열을 한 곳으로 집중하는 것을 막아 열을 분산하는 금속판을 의미한다. 최근의 LED 제품은 고출력화에 의한 발열량의 급증으로 MCL(Metal Clad Laminate)를 이용하여 LED 칩에서 발생된 열을 외부로 배출하는 모듈구조를 나타내는 경우가 대다수이다. LED에서 열이 증가하게 되면 LED의 효율이 감소하고, 수명이 줄어드는 현상을 보이기 때문에 방열특성은 매우 중요하다. 따라서 고출력화되어 LED 칩에서 발생되는 열을 제어하는 기술이 이슈화 되고 있다. 기존의 히트스프레더 구조는 통상적으로 Al/절연층(폴리머)/Al으로 폴리머의 열전도율이 1W/mk로 고출력화에 의해 급증하는 LED의 발열량을 충분히 해소시키기 어렵다. 본 연구에서는 급증하는 LED의 방열량을 해소시키기 위해서 기존의 Al/폴리머/Al의 구조를 $Al/Al_2O_3/Al$의 구조로 개발하기 위해서 HV-SCDB 기술을 이용한 $Al-Al_2O_3$ 복합소재 제조 및 접합특성에 관하여 연구하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.7
• /
• pp.19-25
• /
• 2014

In the LED lighting applications, because LED packages are the origin of heat generation, there are thermal design problem on heat sinks. In the thermal design, it is important to consider the total volume and the total weight of heat sink simultaneously. In this study, an Al 6063 heat sink was optimized using Computational Fluid Dynamics(CFD) simulation tool for the cooling of 30W LED module, and then the cooling performance and the total weight of heat sinks with Al 6063 and Thermal Conductive Polycarbonate(TCP) were compared under the same conditions. As the result of simulation, an Al 6063 heat sink was optimized with 22 ea. of fins and 1.6 mm of fin thickness. LED Junction Temperature of the TCP Heat Sink was $5.6^{\circ}C$ higher, but total weight of it was 47 % less than the Al 6063.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.510-511
• /
• 2017

In this paper, we have studied to minimize the lifetime and fault occurrence of LED fixtures, which have a short lifetime and frequent faults. In the current LED chip, the lifetime is semi-permanent, but compared to the lifetime of the LED chip, Drivers do not last long. In recent years, low-priced LED illuminators such as those from China have entered the market, and many consumers are perceiving LED illuminators. In order to solve these problems, we designed an LED illuminator of 25W class by using AC Direct IC, which has a longer lifetime than the conventional driver, by removing the electrolytic capacitor in the LED driving driver which is the cause of the failure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1038-1042
• /
• 2003

LED(Light Emitting Diodes)를 이용한 LCD 백라이트는 현재까지 모바일용의 $2{\sim}3$ 인치정도의 소형모델에서 상용화되고있다. 현재 동종분야에서 $5{\sim}7$ 인치 이상의 중대형에서는 아직 검토나 개발단계인 것으로 파악되고 있다. LED의 특징인 장수명, 고색순도, Robustness 등의 장점에도 불구하고 광효율이나 경제적측면에서 아직 형광램프 Type 에 비해 개선점이 남아있는 것도 개발지연 이유중의 하나다. 최근에 일부 광원업체에서 소비전력 5W로 높은 출광효율을 갖는 고휘도를 가진 LED가 개발되고있다. 고색재현성을 요구하는 TV등의 민수용 디스플레이시장이 커지는 현 추세에 한 방법으로 3색의 고휘도 LED광원을 사용한 백 라이트를 개발했다. R(Red), G(Green), B(Blue)의 3색 점광원 다수를 이중도광판 구조의 장변에 일정 간격으로 배열하여 최종 출사면에서 백색이 되도록 소정의 구성비로 설계하였다. 점광원간의 간격으로 인해 발생되는 혼색도를 보완하기위해 광원과 출사면까지의 광경로를 점광원이 아닌 튜브형의 형광광원 사용시보다 일정량 길게 설계해야 되는데, 이것으로 인해 출광효율이 형광램프구조에 비해 떨어지는 결과로 나타났다. 본 연구에서는 17인치 모니터구조의 백라이트에서 색재현성 105%와 소비전력 67W에서 표면휘도 $2000cd/m^2$ 정도를 달성하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.388-393
• /
• 2018

In this paper, We developed a high efficiency reflector integrated type 50W AC direct connection type engine to realize miniaturization and weight reduction of product without using SMPS and to design a multistage varistor circuit Reduced costs by reducing the number of parts High reliability is achieved by using a circuit structure that does not use an electrolytic capacitor, thus increasing the lifetime of the LED. In addition, it is possible to manufacture an AC direct-coupled type driving device by using an IC semiconductor and apply an AC direct-coupled type driving device integrated with a reflector so that the lifetime of the device can be fully utilized for the lifetime of the LED, A light source having a plurality of light emitting diode channels including a plurality of light emitting diode channels arranged in series is driven with a rectified voltage.