• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1643-1653
• /
• 2014

This paper presents the design and implementation of a wind-solar hybrid power system for LED street lighting and an isolated power system. The proposed system consists of photovoltaic modules, a wind generator, a storage system (battery), LED lighting, and the controller, which can manage the power and system operation. This controller has the functions of maximum power point tracking (MPPT) for the wind and solar power, effective charging/discharging for the storage system, LED dimming control for saving energy, and remote data logging for monitoring the performance and maintenance. The proposed system was analyzed in regard to the operation status of the hybrid input power and the battery voltage using a PSIM simulation. In addition, the characteristics of the proposed system's output were analyzed through experimental verification. A prototype was also developed which uses 300[W] of wind power, 200[W] of solar power, 60[W] LED lighting, and a 24[V]/80[Ah] battery. The control system principles and design scheme of the hardware and software are presented.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.77-79
• /
• 2009

The paper is to evaluate for reliability of 4W LED Lamp using internal converter by ALTs(Accelerated Life Tests). The recently, some of KS were established by law of LED Modules for Lighting(KS C 7651, 7652, 7653, 7655, 7656, 7657, 7658 and 7659), but reliability assessment methods of LED Lamps had not been established. Therefore, the paper aided companies to perform accelerated life testing(temperature 60 $^{\circ}C$, humidity 90 %) for themselves.

• Journal of Applied Reliability
• /
• v.11 no.3
• /
• pp.267-279
• /
• 2011

LEDs have been used extensively in the mobile device, automobile, and general lighting because they are semi-permanent, long life, less power consumption, reliable and environmentally friendly. In this paper, the accelerated degradation test(ADT) for a general lighting 4W LED Lamp using external converter is considered. The conditions of ADT are high temperature and high humidity. We show that its life time is log-normally distributed with same parameters under both a normal condition and an accelerated condition, and also derive an accelerated factor.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.21-28
• /
• 2015

Purpose: Although security lights are used to secure pedestrian visibility and safety at nighttime, they can generate light trespass in the neighboring residential space. To prevent this, standards for acceptance limits on vertical illuminance and light pollution by the windows of residential buildings are presented. Method: This study thus representatively selected three types of lamps and, through an evaluation and analysis of the physical and subjective discomfort glare per lamp, proposed a discomfort glare index for each lamp. The evaluation and analysis according to the lamps were conducted through experiments. The variables were the security lights' lamps (NH 100W, MH 70W, LED 50W), installation angles ($0^{\circ}$, $20^{\circ}$), and installation distances (3m, 5m, 7m, 9m). Result: According to the results of the discomfort glare evaluation depending on the angles and distances of the security lights, the following minimum standards are proposed: for NH 100W, a discomfort glare index of 30 and an installation distance of 4m; for MH 70W, a discomfort glare index of 32 and an installation distance of 4m; and, for LED 50W, a discomfort glare index of 31 and an installation distance of 6m, respectively. In addition, this paper recommends the use of MH 70W, when the road width is 4m-6m, and LED 50W, when the road width is over 6m, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.240-245
• /
• 2017

In order to study for the growth of fish in the aquaculture industry, the behavior analysis of rock bream (Oplegnathus fasciatus) depending on the temperature and LED lights was conducted. In this study, water temperatures from 10 to 30 degrees were used. One red light (wave length: 622 nm; light power: 811 mW) and one green light (wave length: 518 nm; light power: 648 mW) were used. Behavior of the rock bream was analyzed at an average moving distance for one minutes (AMD) and a rate of movement. The mean AMD were respectively 5.3 m, 7.3 m and 3.0 m in the red LED light, green LED light and control condition. The mean rates of movement were 77%, 88% and 61% respectively in the red LED light, green LED light and control condition. The mean AMD during 24 hours were 3.1 m, 3.1 m and 3.3 m respectively in the red LED light, green LED light and control condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.127-127
• /
• 2010

최근 Light-emitting diodes (LEDs: 발광다이오드) 디바이스의 고휘도, 저전력, 긴 수명, 다양한 색연출 가능, 친환경 소자 등의 장점으로 LED 디바이스가 flat panel display(FPD)의 back light unit (BLU) 를 비롯해 실내 외 조명과 자동차 전조등 분야 이외에도 의료, 인테리어 사업을 비롯한 각종 전자 통신 기기의 정보 처리 기기의 표시소자 등, 여러 제품 군에 적용되는 가운데 큰 관심을 받고 있다. 하지만 이러한 여러 가지 장점에도 불구하고 LED 모듈에서의 junction temperature가 높은 방열 특성이 나쁘다는 단점은 아직 해결되지 않고 있는 실정이다. LED 소자 모듈에서의 junction temperature가 높을 경우 소비되는 에너지가 많을 뿐만 아니라 LED 소자의 발광효율이 떨어지고 수명이 급격히 저하 되어, 결국에는 신뢰성 특성이 현저히 저하 되는 결과가 초래되기 때문이다. 따라서 본 논문에서는 LED 디바이스의 열저항을 낮추기 위해 고방열 세라믹 기판을 이용해 LED 디바이스의 방열 특성을 향상시킨 결과를 제시한다. 고방열 세라믹 기판을 제작하여 LED 칩을 실장시킨 다음 LED 열저항 특성을 측정하였다. 이때 고방열 세라믹 기판은 Al2O3와 AlN이 사용되었으며 제작한 세라믹 기판의 강도, 표면 roughness, 미세구조 등을 살펴보고 이 기판들의 열전도도를 측정하였다. 제작 공정방법에 따라 세라믹 기판의 미세구조를 비롯한 기계적, 열적 특성이 현저히 변하였으며 이때 LED 칩을 실장 하여 측정한 열저항 특성 값도 함께 변하였다. Al2O3의 열저항 값은 3.003 K/W 으로 측정 되었으며, AlN의 열저항 값은 3.003k/W 으로 측정되었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.119-124
• /
• 2007

24" LCD Monitor용 LED BLU를 개발하기 위하여 1.5W R,G,G,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발 하였고 LED를 pulse로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발하였다. 또한 Color Sensor와 ICM (Integrated Color Management) IC를 사용하여 Color를 Control하는 제어회로 부분도 개발을 하였다. 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 ICM IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은 $L558{\times}W359{\times}H30$으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.107-109
• /
• 2007

LED is expected as an environmentally friendly light source with its good reliability and long lifetime. A few ten mW white LED can substitute for the indicator light source, and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lamps. Since the optical technology used for several mW white LED light source uses only 30% to 50% of the light, it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.4
• /
• pp.201-206
• /
• 2014

LED lighting,considered to be a new growth industry, has attracted a great deal of attention due to its higher illumination and longer life time than existing light sources. In this study, high-efficiency and long-life LED fog lamps for automobiles were developed, which can substitute the existing 27 W halogen fog lamps for a used car market. For this purpose, the number of LED modules, the body, heat sink, and the output of the fog lamp were first optimized through a numerical analysis. Then, a 10 W-class LED fog lamp was prototyped based on the optimized numerical model, and the performance of the fog lamp was successfully verified through the experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.282-282
• /
• 2010

LED Device was designed of electronic circuits of electrical power part for used Pspice student version and used Infrared LED lamps of load part. LED was used Computerized Electronic Medical Infrared Thermographic Imaging System for body surface Investigation of variable Body thermal asymmetry. It was knowledge body thermal Asymmetry of body surface and quantity body surface of electromagnetic wave to inflow electrical power part.