• 전자공학회논문지 IE
• /
• v.45 no.3
• /
• pp.42-49
• /
• 2008

This paper proposes a new beamforming algorithm to select beamforming gain or/and diversity gain in CDMA2000, W-CDMA, W-LAN channel according to signal environment on the multipath. In this paper, we present the criteria to obtain deversity gain at any point that based on quantized experimental value. Proposed method proposes represents a performance better than conventional algorithm adopting the largest two eigenvector when angle spread is exit. From the results of performance analysis through various simulation, it is confirmed that proposed method is far superior about $3{\sim}4$ times compare to conventional method in signal environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.601-609
• /
• 2002

In multi-path wireless channels with time-variant delay profile, a mobile station measures the received signal strength and report it to network which performs network control function such as handover. In order to improve the maximum ratio combining (MRC) gain, it also should search the strongest signal paths and measure their time offsets fast and exactly. This paper proposes some methods of fast and exactly measuring the multi-path signal strength and time offset. Since the W-CDMA system adopts antenna diversity technique for the next generation high speed packet access (HSDPA) service, we derive the optimum design parameter values for the proposed methods through computer simulations under the HSDPA conditions o( low speed of mobile, of no power control, and of multi-path wireless environment with transmit and receive antenna diversity. Finally, we prove the validity of the proposed methods by showing the improvement of the bit error rate (BER) performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.227-232
• /
• 2000

This study applied asynchronous W-CDMA(3GPP) system that is suggested as an access method of IMT-2000, multimedia communication in next generation, and estimated fading channel by using pilot symbol different from traditional IS-95. And then, it applied PIC(Parallel Interference Cancellation) as multiple access interference cancellation and analyzed performance depending on the power rate between DPCCH(Control) and DPDCH(Data). As a result of simulation, it showed the best performance in C:D = 3:7 and 4:6, where set up as five users in case of hand design, and showed the best performance in C:D = 3:7, where did as ten users.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.3-6
• /
• 2008

In this paper, we propose the folded PIFA with its made an alteration to a factor of resonance for L-slot PIFA. Proposed antenna maintain diminished size patch and improve each bandwidth of GSM(0.88$\sim$-0.96 GHz) and W-CDMA(1.92$\sim$2,17 GHz) for miniaturized repeater. The non-slot step folded PIFA's structure that design of essence was general L-slot PIFA for dual-band. It has no U-slot, multi band and the another slot. The parameters of proposed antenna were optimized for dual-band and compact size by folded singleness patch. Proposed antenna by using folded singleness patch take satisfaction main point, bandwidth of GSM and W-CDMA, compact patch size($39{\times}21{\times}13mm^3$). The antenna was designed by FDTD simulation tool and it was made from result of simulation. Measured data shown that the proposed non-slot step folded PIFA was strong possibility.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.155-160
• /
• 2003

Owing to the advances in ADC and DSP technologies, signals in If band, which once had to be processed in analog technology, can new be digitally processed. This is referred to as "Digital IF" or "Digital Radio", which is a preliminary stage of SDR. Applying the digital radio technology to a multi-carrier receiver design, a processing gain is generated through an over-sampling of input data. In the digital receiver, decimation is performed for reducing the computational complexity CIC and half band filter is used together with the decimation as an anti-alising filter. The CIC filter, however, should introduce the roll-off phenomenon in the passband, which causes the receiving performance to be considerably degraded due to the distorted Passband flatness of receiving filter. In this paper, we designed a CIC roll-off compensation filter for W-CDMA digital receiver. The performance of the proposed compensation filter is confirmed through computer simulations in such a way that the BER is minimized by compensating the roll-off characteristics.off characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.68-75
• /
• 2012

The load-insensitivity of the balanced power amplifier(PA) for W-CDMA handset applications is analyzed. The load impedances of the two parallel amplifiers in the balanced PA depending on the output load mismatch are mathematically calculated and with the result, the phase of reflection coefficient at which the linear output power is severely degraded is investigated. From the analysis, we proposed that the linearity of the balanced PA at the phase can be improved by properly increasing the transistor size and thus, multiple balanced PA's with different transistor size are designed and simulated. The simulation result showed that the balanced PA with larger transistor size has improved linear output power under VSWR=4:1.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.611-617
• /
• 2000

Asynchronous mode W-CDMA system is kmown to be quite appropriate to the next generation mobile communication system, especially in a non-homogenious cellular architecture. In this case, however, each base station needs to use different spreading code for identification, so it is a demeanding task for a mobile terminal to find the best cell site and get an accurate code synchronization at the beginning of a communication. Since slow acquisition of a base station could mean the failure of initiation, a fast algorithm to accelerate the cell search process is essential. In this paper, a new cell search algorithm based on the binary code position modulation within the code block is proposed. Different cell sites are identified by different hopping code sequences, andeach position modulation is performed by the hopping code. The proposed algorithm is proved to make the cell search time in most places in a cell much shorter than the previous algorithms, and to make the receiver implementation simpler.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1355-1362
• /
• 2004

In this paper, we present the performance analysis of a multi-path searcher operating over Rayleigh fading channels when multiple transmit antennas are employed in the down-link of W-CDMA system. The simulation results for the receiver operating characteristics (ROC) for 1, 2, and 4 transmit antennas are presented to corroborate the theoretical analyses. We also propose a procedure to find the optimum parameters of double-dwell serial searcher according to the number of the multiple transmit antennas. Our analyses and simulations indicate that post-detection integration is not necessary when the number of transmit antennas is more than two. Finally, we found that increasing transmit diversity order does not necessarily improve the detection performance when the received pilot signal strength is relatively low. Therefore, this gives us a practical criterion on increasing transmit diversity order.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.853-864
• /
• 2001

In this paper, system model is based on proposed standardization by 3GPP(Asynchronous IMT-2070 system), and we have analyzed the performance of the DS-CDMA/QPSK which cancelled self-interference, so that occurs when the received signal time is delay by multipath fading. We proposed the new scheme that designed for self-interference cancellation and the system performance is calculated in Rician fading and Rayleigh fading channel. The proposed rake receiver can be achieved a gain of about 1 [dB]∼6 [dB] more than generally rake receiver, and will be a very effective method to improve the performance of IMT-2000, and these data can be available for modem design of DS-CDMA.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.105-113
• /
• 1995

For the case of using analog FM system and CDMA system together in the mobile communications, we experimentally calculate the appropriate frequency offset to improve the frequency efficiency by analizing the interference between both systems. As the results of the analysis, we obtained that frequency offset is 840KHz(Path Loss : 80dB) and 720KHz(Path Loss : 120dB) for the Path Loss when a output of CDMA Base Station is 0.91 W ERP. Therefore, to minimize the frequency offset, a output of Base Station will be controlled corresponding to Cover Area.