• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1236-1238
• /
• 1994

TiAlN thin films were prepared by a multi target r.f magnetron sputtering system under different conditions. We have investigated the resistivity and T.C.R. (Temperature Coefficient of Resistance) characteristics of TiAlN films deposited on $Al_2O_3$ and glass substrates by sputtering in an $Ar:N_2$ gas mixture. We used Al and Ti metal as Target Material and $Ar:N_2$ gas as working gas. We varied the partial pressure ratio of $N_2/Ar$ from 0.2/7 to 1.0/6.2 (SCCM). And the R.F power of Ti and Al Target also were varied as 160/240, 200/200 and 240/160(W). In this experiment, we can get the precision thin film resistor with a very low T.C.R. (Temperature Coefficient of Resistance) below 25 ppm ${\Omega}/^{\circ}C$.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ]박막은 DC 마그네트론 스퍼터링법을 이용하여 다양한 스퍼터링 파라미터(전력 $0.6{\sim}5.2\;kw$, 기판온도 실온${\sim}350^{\circ}C$, 산소량 $0{\sim}50\;sccm$($O_2+Ar$ 90 sccm, 압력은 약 1 mtorr))를 통하여 증착되었다. TiO-N박막도 가스의 유량비를 제외하고는 $TiO_2$박막과 같은 스퍼터링 조건하에서 증착되었다. 이러한 스퍼터링 파라미터에서 증착된 박막의 전기적 특성을 분석하기 위하여 시트저항을 측정하였고, 박막의 두께(${\alpha}$-step), 표면 거칠기(AFM), 형성 조직(FE-SEM, XRD)을 분석하여 최적 스퍼터링 파라미터를 도출하였다. 최적 스퍼터링 파라미터에서 제조된($TiO_2$, TiO-N)박막을 이용하여 광활성도를 평가하기 위하여 VOCs물질 중 toluene, 반응성 염료인 Suncion Yellow를 대상 물질로 선정하여 적용성 연구를 수행하였다. 실험에서 광촉매 박막은 적용물질에 대해서 광활성을 양호하게 보였으며, 특히 TiO-N광촉매 박막은 가시광 영역에서도 최대 33%의 톨루엔(5 ppm) 제거 효율을 나타내었다.

• Tribology and Lubricants
• /
• 제10권3호
• /
• pp.18-28
• /
• 1994

Sliding friction between a spherical pin of 8mm in diameter and flat (disk) substrates coated with vacuum-deposited thin film was measured under ultra high vacuum pressure for various materials, various rates of film supply (8~210 nm/min), various sliding velocities (1.5~67.0 mm/s). It was found that the most effective lubrication was obtained when the adhesion between $Si_3N_4$ pin and SUS440C disk was high and that between $Si_3N_4$ pin and $Si_3N_4$ disk was low. When In film was used as a lubricant between $Si_3N_4$ pin and stainless steel disk, the friction coefficient had a value as low as 0.04. In this case, the normal load W and the sliding speed V were expressed as 10N and 24 mm/s for $10^{-6}Pa$. The dependence of $\mu$ on the thickness h of the Ag film, which was used as a lubricant between $Si_3N_4$ pin and SUS440C (Q) disk was expressed as $\mu$=0.12 for W=10N and V=24mm/s when the film was thicker than 100nm. A brief discussion on these relations is presented from the viewpoint of the real contact area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.718-721
• /
• 2004

The $(Sr_{0.9}Ca_{0.1})TiO_3$(SCT) thin films are deposited on Pt-coated electrode$(Pt/TiN/SiO_2/Si)$ using RF sputtering method at various substrate temperature. The optimum conditions of RF power and $Ar/O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about $18.75[{\AA}/min]$. The crystallinity of SCT thin films were increased with increase of substrate temperature in the temperature range of $100\sim500[^{\circ}C]$. The dielectric constant of SCT thin films were increased with the increase of substrate temperature, and changed almost linearly in temperature ranges of $-80\sim+190[^{\circ}C]$. The current-voltage characteristics of SCT thin films showed the increasing leakage current as the substrate temperature increases.

• 한국정보통신학회논문지
• /
• 제4권3호
• /
• pp.705-711
• /
• 2000

반도체 제조공정과 미세가공 기술을 이용하여 $300^{\circ}C$의 동작온도에서 약 60 mW의 전력소모를 갖는 산화물 반도체 박막 가스센서 어레이를 제조하였다. 멤브레인의 우수한 열적 절연은 $0.1\mum\; 두께의\; Si_3N_4와\; 1\mum$ 두께의 PSG의 이중 층에 의한 것으로, 각각 LPCVD(저압화학 기상증착)와 APCVD(대기압 화학 기상증착)에 의해 제조되었다. 센서 어레이의 4가지 산화물 반도체 박막 감지물질로는 1 wt.% Pd가 도핑된 $SnO_2,\; 6 we.% A1_2O_3$가 도핑된 ZnO, $WO_3$, ZnO를 이용하였으며,4가지 감지물질의 베이스라인 저항은 $300^{\circ}C$ 에서 3일 동안의 에이징을 거친 후 안정됨을 보였다. 제조된 초소형 산화물 반도체 박막 가스센서 어레이는 여러 가지 가스의 노출 시 유용한 저항 변화를 나타내었으며 감도는 감지 물질에 강하게 의존함을 알 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.146.4-146
• /
• 1998

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1010-1013
• /
• 2006

To understand the exact charge carrier photogeneration properties of photoactive thin films consisting of a ${\pi}-conjugated$ polymer matrix and a triplet dopant, we prepared two types of polymer, poly(9-vinylcarbazole) (PVK) and poly[9,9-bis(2- ethylhexyl)fluorene-2,7-diyl] (PF2/6) doped with triplet emitters for organic light-emitting diodes (OLED), either iridium(III)fac-tris(2-phenylpyridine) $(Ir(ppy)_3)$ or iridium(III)bis[(4,6-fluorophenyl)- $pyridinato-N,C^2'$]picolinate (FIrpic), as thin film devices by using the conventional method. Those doped film devices, as well as pristine film devices, on ITO substrates were characterized by means of steady state photocurrent measurement for a wide spectral range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.88-91
• /
• 2000

The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/$SiO_2$/Si) using RF sputtering method. The crystallinity of SCT thin films is increased with increase of substrate temperature in the temperature range of 200~500$[^{\circ}C]$. V-I characteristics of SCT thin films show the increasing leakage current with the increases of deposition temperature. The conduction mechanism of the SCT thin films observed in the temperature range of 25~100$[^{\circ}C]$ can be divided into four characteristic regions with different mechanism by the increasing current.

• 한국결정성장학회지
• /
• 제17권2호
• /
• pp.47-51
• /
• 2007

저굴절 재료인 F-doped SiOC : H 박막을 Si 웨이퍼와 유리기판위에 rf power, 기판온도, 그리고 가스유량($SiH_4,\;CF_4$ and $N_2O$)을 변수로 하여 PECVD법으로 증착하였다. 기판 온도와 rf power증가에 따라 F-doped SiOC : H 박막의 굴절률은 감소하는 경향을 보였다. $N_2O$ 가스 유량이 감소함에 따라 증착된 박막의 굴절률은 감소하였으며, rf power가 180W 기판온도 $100^{\circ}C$, 그리고 $N_2O$ 가스를 첨가하지 않은 조건에서 증착한 박막은 최소 굴절률인 1.3778을 갖는 것을 알 수 있었다. Rf power 60W에서 180W로 증가시킴에 따라 증착된 박막의 불소 함량은 1.9at%에서 2.4at%로 증가하였으며 이러한 이유로 박막의 굴절률은 감소하는 경향을 나타냈다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.367-367
• /
• 2008

Aluminum nitride (AlN) thin films have been deposited on Si substrate by using reactive RF magnetron sputtering method in a gas mixture of Ar and $N_2$ at different $N_2$ concentration. It was found that $N_2$ concentration was varied in the range up to 20-100%, highly c-axis oriented film can be obtained at 50% $N_2$ with full width at half maximum (FWHM) $4.5^{\circ}$. Decrease in surface roughness from 7.5 nm to 4.6 nm found to be associated with decrease in grain size, with $N_2$ concentration; however, the AlN film fabricated at 20% $N_2$ exhibited a granular type of structure with non-uniform grains. The absorption peak was observed around 675 $cm^{-1}$ in fourier transform infrared spectroscopy (FTIR). It is concluded that the AlN film deposited at $N_2$ concentration of 50% exhibited the most desirable properties for the application of high-frequency surface acoustic devices.