• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.481-486
• /
• 1999

According to results of this research Fly-ash Cement permanent-form production was found to be possible by fly-ash mortal. The compress strength 350kg/$\textrm{cm}^2$, banding strength 120kg/$\textrm{cm}^2$ were possible material separting and bleeding by excessive W/C rate was decreased permanent-form made by polymer solved high price of polymer by fly-ash. Model material was made by result of first research. There were no minute-crack on beam form and out surface of form was very smooth, So filling degree seemed desirable length of form after steaming curing was maintained as expected. with these results production of form seemed possible. In the banding load test, fly-ash showed increase of maxim load 12% than RC. in the case of minute-crack, comparing with RC, fly-ash showed no crack at connect. at the first stage under continuing loading size of crack increased. These phenomena seemed to be based on contribution of stress of inner bars in permanent-form. in the test of defection, fly-ash shower about 10% beam load increase than RC. in the case of beam defection, RC showed sudden decrease of tolerance at maxim load and total breaking, but permanent-form showed breaking of bending maintaining defection with contribution of steel stress ($\Phi$6 wire-mash). There phenomenic seemed to be attributed to increase of surface and steel tolerance of form. According to construction explacemaion, it was guessed that each panel was constructed by conner-steels in form edge. so cohesiveness was small. on these bases. keeping width of horizontal band 30cm, form-panel of 20mm width was found to be of use. Permanent-form was found to be efficient in compressibleness, defection, safety and use of Fly-ash mortal.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.906-909
• /
• 2006

The secondary electron emission coefficient $({\gamma})$ of the cathode is an important factor for improving the discharge characteristics of AC-PDPs because of its close relationship to discharge voltage. In AC-PDPs, MgO is most widely used as a surface protective layer. In this experimental, we have investigated the electronic structure of the energy band structure of the MgO layer responsible for the high ${\gamma}$. The MgO layers have been deposited by electron beam evaporation method, where the $O_2$ partial pressures have been varied as 0, $5.2{\times}10^{-5}$ torr, $1.0{\times}10^{-4}$ torr, and $4.1{\times}10^{-4}$ torr, in this experiment. It is noted that work function that is energy gap between surface and first defect level of MgO layer has the lowest value for the highest O2 partial pressure of $4.1^{\ast}10^{-4}$ Torr.

• 전자공학회논문지 IE
• /
• v.47 no.4
• /
• pp.1-9
• /
• 2010

This paper describes a ultrasonic signal processing front-end IC for distance range meter and body detector. The burst shaped ultrasonic signal is generated by a self oscillator and its frequency range is about 40[kHz]-300[kHz]. The generated ultrasonic signal transmit through piezo resonator. The another piezo device transduce from received ultrasonic signal to electrical signals. This front-end IC contained low noise amplifier, band pass filter, busrt detector and time pulse generator and so on. This IC has two type of new idea for improve function and performance, which are self frequency control (SFC) and Variable Gain Control amplifier (VGC) scheme. The dimensions and number of external parts are minimized in order to get a smaller hardware size. This device has been fabricated in a O.6[um] double poly, double metal 40[V] High Voltage CMOS process.

• Spatial Information Research
• /
• v.21 no.2
• /
• pp.45-54
• /
• 2013

Analytical and simulation error models have the ability to describe (or realize) error-corrupted versions of spatial data. But the different approaches for modeling positional errors require an internal validation that ascertains whether the analytical and simulation error models predict correct positional errors in a defined set of conditions. This paper presents stochastic simulation models of a point and a line segm ent to be validated w ith analytical error models, which are an error ellipse and an error band model, respectively. The simulation error models populate positional errors by the Monte Carlo simulation, according to an assumed error distribution prescribed by given parameters of a variance-covariance matrix. In the validation process, a set of positional errors by the simulation models is compared to a theoretical description by the analytical error models. Results show that the proposed simulation models realize positional uncertainties of the same spatial data according to a defined level of positional quality.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.66.2-66.2
• /
• 2017

The Korea Astronomy and Space Science Institute plans to develop a coronagraph in collaboration with National Aeronautics and Space Administrative (NASA) and install it on the International Space Station (ISS). The coronagraph is an externally occulted one stage coronagraph with a field of view from 2.5 to 15 solar radii. The observation wavelength is approximately 400 nm where strong Fraunhofer absorption lines from the photosphere are scattered by coronal electrons. Photometric filter observation around this band enables the estimation of 2D electron temperature and electron velocity distribution in the corona. Together with the high time cadence (< 12 min) of corona images to determine the geometric and kinematic parameters of coronal mass ejections, the coronagraph will yield the spatial distribution of electron density by measuring the polarized brightness. For the purpose of technical demonstration, we intend to observe the total solar eclipse in 2017 August for the filter system and to perform a stratospheric balloon experiment in 2019 for the engineering model of the coronagraph. The coronagraph is planned to be installed on the ISS in 2021 for addressing a number of questions (e.g. coronal heating and solar wind acceleration) that are both fundamental and practically important in the physics of the solar corona and of the heliosphere.

• Composites Research
• /
• v.29 no.4
• /
• pp.179-185
• /
• 2016

A self-charging supercapacitor is constructed through simple integration of the energy storage and photo exited materials at the photo electrode. The large band gap of $NiO/Fe_3O_4$ heterostructure generates photo electron at the photo electrode and store the charges through redox mechanism at the counter electrode. Sulfanilic acid azocromotrop/reduced graphene oxide layer at the photo electrode trapped the photo generated hole and store the charge by forming double layer. The solar supercapacitor device is charged within 400 s up to 0.5 V and exhibited a high specific capacitance of ~908 F/g against 1.5 A/g load. The solar illuminated supercapacitor shows a high energy and power density of 33.4 Wh/kg and 385 W/kg along with a very low relaxation time of ~15 ms ensuring the utility of the self charging device in the various field of energy storage and optoelectronic application.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.411-414
• /
• 2002

The CdTe semiconductor detector has a higher detection efficiency for x-rays and $\square$amma rays and a wider energy band gap compared with Si and Ge semiconductor detectors. Therefore, the size of the detector element can be made small, and can be operated at room temperature. The interaction between a CdTe detector and incident x-rays is mainly photoelectric absorption in the photon energy range of up to 100 keV. In this energy range, Compton effects are almost negligible. We have developed a 256 channel CdTe array detector system for monochromatic x-ray CT using synchrotron radiation. The CdTe array detector system, the element size of which is 1.98 mm (h) x 1.98 mm (w) x 0.5 mm (t), was operated in photon counting mode. In order to improve the spatial resolution, we tilted the CdTe array detector against the incident parallel monochromatic x-ray beam. The experiments were performed at the BL20B2 experimental hutch in SPring-8. The energy of incident monochromatic x-rays was set at 55 keV. Phantom measurements were performed at the detector angle of 0, 30 and 45 degrees against the incident parallel monochromatic x-rays. The linear attenuation coefficients were calculated from the reconstructed CT images. By increasing the detector angle, the spatial resolutions were improved. There was no significant difference between the linear attenuation coefficients which were corrected by the detector angle. It was found that this method was useful for improving the spatial resolution in a parallel monochromatic x-ray CT system.

• The Plant Pathology Journal
• /
• v.22 no.2
• /
• pp.125-130
• /
• 2006

An isolate of Peanut stunt virus (PSV) isolated from black locust tree (Robinia pseudo-acacia L.) showing severe mosaic and malformation symptoms, was designated as PSV-Rp. PSV-Rp was characterized by the tests of host range, physical properties, RNA and coat protein composition and RT-PCR analysis. Nucleotide sequences of the cucumoviruses CP genes were also used for identification and differentiation of PSV-Rp. Six plant species were used in the host range test of PSV-Rp. PSV-Rp could be differentiated from each Cucumovirus strain used as a control by symptoms of the plants. The physical properties of PSV-Rp virus were TIP $65^{\circ}C$, DEP $10^{-3}$, and LIP $2{\sim}3$ days. In dsRNA analysis, PSV-Rp consisted of four dsRNAs, but satellite RNA was not detected. Analysis of the coat proteins by SDS-PAGE showed one major protein band of about 31 kDa. RT-PCR using a part of Cucumovirus RNA3 specific primer amplified ${\sim}950bp$ DNA fragments from the crude sap of virus-infected black locust leaves. RFLP analysis of the RT-PCR product could differential PSV-RP from CMV The nucleotide sequence identity between the PSV-Rp CP and the TAV-P CP genes and the PS-V-RP CP and CMV-Y CP genes were 61.6% and 40.5%, respectively. On the other hand, the nucleotide sequence identity of the PSV-Rp CP gene was $70.9%{\sim}73.4%$ in comparison with those of PSV subgroup I (PSV-ER and PSV-J) and 67.3% with that of PSV subgroup II(PSV-W). Especially, the nucleotide sequence identity of PSV-Rp CP gene and that of PSV-Mi that was proposed recently as the type member of a novel PSV subgroup III was 92.4%.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.233-239
• /
• 1990

The effect of alachlor treatment on peroxidase synthesis in oat root tips was studied. Alachlor caused increase in the amount of soluble peroxidase in oat root tips, peroxidase activity increase as the rate of alachlor application increased, Alachlor treatment of oats with $1{\times}10^{-6}M$, peroxidase activity increased 0.20 unit higher than that of nontreatment. After 12hr, 65mM of peroxide treatment of oats inhibited 16% root growth, and 130 mM peroxide treatment caused 59% inhibition. With PAGE of peroxidase extracted from normal root tips, PAGE give 4 species($P_2$, $P_3$, $P_4$, and $P_5$ band) of peroxidase. Alachlor significantly activated isoperoxidase. Three isoperoxidase($P_1$, $P_6$, and $P_7$) are synthesized at a increased concentration of alachlor, SDS-PAGE analysis of proteins extracted from oat root tips showed that they were made up of subunits blow 100 kD polypeptide.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.1
• /
• pp.48-53
• /
• 1999

The study was carried out to investigate the effects of hydrolysis conditions such as treatment times and concentrations on the solubility of insoluble sericin using the hydrochloric acid solution. When insoluble sericin was hydrolyzed by HCl solution, the solubility was increased with the higher treatment concentration. As the results of electrophoresis of sericin powder obtained by the HCl treatment, a distinguishable band was not confirmed. Average degree of polymerizations(A.D.P.) of sericin hydrolyzed by HCl solution were about 4.2~5.9 and average molecular weights(M.W.) were about 470~670. The longer hydrolysis time reduced the whiteness of sericin powder. As the results of amino acid analysis, the amino acid compositions of the sericin powder from HCl treatment were sililar to that of insoluble sericin, but Tyr. and Arg. were not detected in the powder obtained by HCl treatment. In DSC analysis, thermal deformation and pyrolysis peak located at near 220$^{\circ}C$ and 330$^{\circ}C$.