• 한국재료학회지
• /
• 제26권4호
• /
• pp.200-206
• /
• 2016

This study was carried out to investigate the effect of W substitution on the precipitation behavior of ${\chi}$ and ${\sigma}$ phases in super duplex stainless steel. The ${\chi}$ phase was precipitated at the interface of ferrite / austenite phases and inside the ferrite phase at the initial stage of aging. With an increase in the aging time, the volume fraction of the ${\chi}$ phase increased, and then decreased with the transformation from the ${\chi}$ phase to the ${\sigma}$ phase. The ${\sigma}$ phase was precipitated later than the ${\chi}$ phase, and the volume fraction of x phase increased with the increase in the aging time. The ferrite phase was decomposed into the new austenite (${\gamma}2$) and ${\sigma}$ phases by aging treatment. The decomposition of the ferrite phase into the ${\gamma}2$ and ${\sigma}$ phases was retarded by W substitution for Mo. The volume fraction of the ${\chi}$ phase increased and that of the ${\sigma}$ phase decreased due to W substitution. The ${\chi}$ and ${\sigma}$ phases were intermetallic compounds, which had lower nickel concentration, and higher chromium, molybdenum, and tungsten concentrations. The ${\chi}$ phase has higher molybdenum and tungsten concentrations than those of the ${\sigma}$ phase. The amounts of chromium and nickel in the ${\chi}$ and ${\sigma}$ phases did not change, but these phases have higher concentrations of molybdenum and tungsten due to W substitution for Mo.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.214-219
• /
• 2000

In this paper the structural dielectric and piezoelectric properties of Pb［(M $g_{1}$2// $W_{1}$2/)$_{x}$-(N $i_{1}$3//N $b_{2}$3/)$_{0.15-x-(Zr_{0.5})}$ $Ti_{0.5}$)$_{0.85}$］ $O_3$ (x=0.0~0.10) ceramic were investigated with the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$. According to the substitution of Pb(M $g_{1}$2//W/1/2/) $O_3$ curie temperatures were slightly decrease due to the decrease of the tetrag-onality of crystal structure and coercive fields were decreased. Up to the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ 3mol%,remnant polarization dielectric constant piezoelectric constant were increased. Dielectric constant and electro-mechanical coupling factor( $k_{p}$, $k_{31}$ ) were appeared the highest value of 2230, 0.64, and 0.38 and piezoelectric constant( $d_{33}$ , $d_{31}$ ) was the largest value of 418, 202($\times$10$^{-12}$ /C/N), respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/N) respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ was 3mol%.s 3mol%.%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권2호
• /
• pp.209-213
• /
• 2005

This study was conducted to determine the optimum substitution level of dried leftover food (DLF) in formula feed for Hanwoo (Korean Native Cattle) steers. A total of forty growing steers were assigned to 5 treatments based on substitution level of DLF (at 0, 25, 50, 75 and 100% level of formula feed). The experiment was carried out with growing steers from 6 months of age to 24 months of age. Average daily gain (ADG) was not affected by DLF substitution level up to 75% of formula feed. However ADG decreased at 100% substitution level. Daily feed intakes were similar among treatments but the amount of feed per 1 kg gain increased with increasing substitution level of DLF. Dressing percentage was around 62% in all treatments without any significant differences. Proportion of quality beef higher than grade 1 was the greatest from animals fed 25% substitution level of DLF. Economic efficiency for Hanwoo steer operator was the highest with 50% substitution level of DLF.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.207-214
• /
• 1997

Strength experimental on mortar which use Quenched Blast-Furnace Slag as aggregate was carried our for a fundamental study of application possibility of Quenched Blast-Furnace Slag as aggregate. It gives the following results. The strength of mortar use Quenched Blast-Furnace Slag is decrease as substitution rate is higher. As W/C rate increase, the strength decrease, but the strength decrease of fine aggregate rate 1:3 is lower than 1:2. The relation with fine aggregate is that the amount of fine aggregate is inversely proportional to strength. Th relation with age is proportional to strength and strength rate of going is lower than general mortar in 28 age the change of strength proportionately with W/C rate is that as W/C rate increases, th strength is drop ; it shows that it has same tendency as general mortar sand or crushed sand, but while W/C rate increase the strength is as high as general mortar. The reason can be assumed that water content per unit needed to Quenched Blast-Furance Slag is more than in case of sand. In addition, the relation with substitution rate is that the strength is the strongest at substitution rate 25% and 50% ; that is , sometimes it is higher than mortar which use sand 100%. In addition, long age strength of mortar which use Quenched Blast-Furnace Slag as aggregate is about to be studied in the last.

• 비파괴검사학회지
• /
• 제24권1호
• /
• pp.29-37
• /
• 2004

22Cr-5Ni 2상 스테인리스강의 합금원소 중 몰리브덴(Mo) 원소를 텅스텐(W)으로 치환하여 크리프거동에 미치는 영향을 조사하였다. 그리프시험은 $600^{\circ}C$와 $650^{\circ}C$의 온도에서 실시하였다. $650^{\circ}C$ 크리프 시에는 취약한 금속간화합물인 ${\sigma}$상이 석출하였으며 이것은 크리프수명을 급격히 감소시키는 역할을 하였다. Mo에 대한 W원소의 치환은 일반적으로 ${\sigma}$상의 석출을 지연시킨다고 알려져 있으나, 2wt.%까지 W 치환을 실시한 본 연구범위에서는 크리프 수명 및 최소 크리프속도에 뚜렷한 영향을 미치지 못하였다. 크리프손상의 정도를 평가하기 위하여 크리프시편에 대한 초음파검사를 실시하였다 크리프온도 $600^{\circ}C$에서는 크리프시편의 수명이 증가함에 따라 음속이 비례적으로 증가하였으나 $650^{\circ}C$에서는 반대로 감소하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.99-104
• /
• 2001

Slag product has the possibility as alternative aggregate and sand under the circumstance of natural resource shortage. Copper slag is the by-product produced in process of copper industry. Recycling the slag in construction industry could give positive effects on the environmental preservation. This study presents that the fundamental properties of high strength concrete which used copper slag as alternative sand. Testing factors are concrete's slump, bleeding, air contents and compressive strength. The results of this study are as follows. (1) Mixing of W/C 30%, substitution rate 25% shows the best slump. As substitution rates are going up, concrete slump is uprising and air contents are downsizing. (2) The bleeding of concrete becomes more serious as substitution rates are going up. (3) The best compressive strength of copper slag concrete is achieved in mixing of W/C 30%, substitution rate 25%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.40-45
• /
• 1999

This experimental study presents the strength properties of mortar using the blast-furnace slag sand. The mix disign of this study is based on the each three classes of unit water; (250, 275, 300)kg/㎥ and four classes of W/C; (45, 50, 55, 60)% and substitution rate(0, 25, 50, 75, 100)%. It gives following result. As W/C ratio increase, the strength is decrease. In case of mortar using air-cooled blast-furnace slag sand, the 3-days and 7-days compression strength is increase as substitution rate is higher. But in case of the mortar using the quenched blast-furnace slag sand, the compression strength is decrease as substitution rate is higher.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.417-421
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric ceramics for LTCC (Low-Temperature Cofired Ceramic) multilayer piezoelectric actuator, PMW-PMN-PZT ceramics using $0.2wt%\; Li_2CO_3$ and $0.25wt%\;CaCO_3$ as sintering aids were investigated according to the varation of PMW substution. Composition ceramics could be sintered at $900^{\circ}C$ by adding sintering aids. As the amount of PMW substitution increased, the crystal structure of PMW-PMN-PZT ceramics moved from tetragonal phase to rhombohedral phase gradually, and MPB(Morphotrophic Phase Boundary) region appeared at 2 mol% PMW substitution. At the sintering temperature of $900^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}r$), piezoelectric constant(d33) and Curie temperature(Tc) of 2 mol% PMW substituted PMW-PMN-PZT ceramics showed the optimal values of $7.88g/cm^3$, 0.58, 1002, 1264, 352 pC/N and $336^{\circ}C$, respectively, for LTCC multilayer piezoelectric actuator application.

• Journal of Applied Biological Chemistry
• /
• 제62권3호
• /
• pp.299-304
• /
• 2019

본 연구에서는 주박을 발효식품에 이용하기 위하여 요구르트 제조의 주원료인 탈지분유를 주박 효소 당화물로 대체(10, 20, 30, 50%)한 실험군과 탈지분유만을 사용한 대조군을 상업용 Bifidobacterium longum, Lactobacillus acidophilus, Streptococcus thermophilus 혼합 균주로 요구르트 발효를 실시하면서 발효특성을 비교하고, 발효 후 요구르트의 관능특성과 저장성을 조사하였다. 요구르트의 pH는 배양시간에 따라 급격히 감소하여 발효 12시간 후 대조군은 4.30, 주박 효소 당화물 첨가군은 3.96~4.16으로 주박 효소 당화물의 사용량에 비례하여 감소하였다. 적정산도는 pH와 유사하게 증가하였으나 발효 12시간 후 대조군은 0.93%, 주박 효소 당화물 첨가군은 0.84~1.04%로 탈지분유의 대체율이 낮은 조건(10~20%)에서는 대조군보다 산의 생성이 증가되었지만 탈지분유의 30% 이상을 대체하면 산의 생성이 감소하였다. 젖산균 생균수는 발효 9시간까지 급격하게 증가하여 대조군과 주박 효소 당화물 첨가군 모두 8.18~8.24 log CFU/g를 나타내었으나 발효 18시간 후 탈지분유의 30~50%이 대체된 요구르트의 생균수는 7.54~7.69 log CFU/g로 감소하였다. 관능평가 결과 맛과 전체적인 기호도 항목에서 탈지분유의 10~20%를 주박 효소 당화물로 대체하여 제조한 요구르트가 대조군과 유의적인 차이가 없었다. 탈지분유의 일부를 주박 효소 당화물로 대체한 요구르트를 $4^{\circ}C$에서 14일간 저장하는 동안 pH와 적정산도의 변화는 미미하였다. 그러나 젖산균 생균수는 주박 효소 당화물의 사용량에 비례하여 감소하였고, 탈지분유의 10~20%를 주박 효소 당화물로 대체하여 제조한 요구르트에서 저장 11일까지 생균수가 $10^7CFU/g$ 이상으로 유지되었다.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.75-79
• /
• 2013

This study was carried out to investigate the precipitation behavior of the ${\chi}$ phase and the impact toughness of 25%Cr-7%Ni-2%Mo-4%W super duplex stainless steel. The ${\chi}$ phase was precipitated in the early stage of aging, and with the increasing aging time. However, after reaching a maximum value, the number decreased as a result of the gradual transformation of the ${\chi}$ phase into the ${\sigma}$-phase. It was proved that the ${\chi}$ phase was an intermetallic compound, which represented a lower nickel concentration, higher chromium and molybdenum concentrations, and very higher tungsten concentration compared to the matrix phases. It also showed higher molybdenum and tungsten concentrations than the ${\sigma}$ phase. The decomposition of the ferrite phase into the ${\gamma}_2$ and ${\sigma}$ phases was retarded by W substitution for Mo. Thus, the number of ${\chi}$ phases increased. The impact value was decreased by the substitution of W for Mo. The impact toughness rapidly decreased with time when the ${\chi}$ phase began to precipitate in the initial stage of aging. The impact toughness was, therefore, greatly influenced for the precipitation of the ${\chi}$ phase.