• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.4
• /
• pp.112-120
• /
• 2006

Multicarrier code division multiple access(MC-CDMA) system that combines multicarrier modulation with CDMA offers robustness to frequency selective fading and can support higher rate data transmission with higher spectral efficiency. A new asynchronous MC-CDMA system to implement multiple data rate communications is proposed in this paper. In a W-CDMA downlink the orthogonal variable spreading factor(OVSF) code is used for variable spreading factor for various multimedia traffic. Proposed system utilizes the OVSF code that generated by generation property for spreading. The proposed MC-CDMA system use different lengths of OVSF code as a spreading code according to their data rate. The groupwise processing is accomplished by code grouping in OVSF code generation tree. For the analysis of average BER performance, numerical method and computer simulation were used. We also compare the system performance with that of a single rate MC-CDMA system used orthogonal code as a spreading code.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.391-391
• /
• 2004

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.69-70
• /
• 2007

The code division multiple access (CDMA) system capacity is limited by the amount of interference of the system. To reduce the unnecessary interference, this paper proposes optimized cell identification (ID) codes for site selection diversity transmission (SSDT) power control in wideband code division multiple access system of third generation partnership project (3GPP). The proposed SSDT cell ID codes are designed to minimize the problem and to be easily decoded using simple fast Hadamard transformation (FHT) decoder.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.465-467
• /
• 1989

Many Korean graphic cards have been produced. But, due to the diversity of korean code system all korean graphic cards produced have been adapted in specific code system. Therfore, considering in KSC-5601-1987, the paper propose a Korean decoder independent of code system

• Journal of Astronomy and Space Sciences
• /
• v.4 no.2
• /
• pp.101-106
• /
• 1987

The current distribution of galaxies may contain clues to the condition of the universe when the galaxies condensed and to nature of the subsequent expansion of the universe. The development of this large scale structure can be studied by employing N-body computer simulations. The present paper describes the code developed for this purpose. The computer code calculates the motion of collisionless matter acting under the force of gravity in an expanding flat universe. The test run of the code shows the error less than 0.5% in 100 iterations.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.384-388
• /
• 2002

X-band(8-12㎓)에서 50W의 고출력을 내는 진행파관 증폭기를 설계하고 제작하여 측정하였다. 본 연구에서는 전자빔과 전자파가 상호작용을 일으키는 Interaction Circuit을 나선형구조로 구성하였고 저속파구조의 분산특성을 얻기 위해 Sheath helix 모델링 이론을 적용하였고 HFSS(High Frequency Structure Simulator) Code를 사용해 분산특성을 얻었으며 이를 바탕으로 제작하여 측정하였다. 또한 2D-MAGIC Code를 통해 전파 빔과 전자파와의 상호작용관계와 증폭기의 성능을 예측하였다. 시뮬레이션 결과 포화입력전력 100 mW를 넣었을 때 10㎓에서 43W의 출력전력과 26㏈의 이득을 얻을 수 있었으며 측정을 통해 입력전력 30mw일 때 8W의 출력, 24㏈의 이득을 얻을 수 있었다.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3692-3699
• /
• 2023

The Rare isotope Accelerator complex for ON-line experiments in Korea houses several accelerator complexes. Among them, the µSR facility will be initially equipped with a 600 MeV and 100 kW proton beam to generate surface muons, and will be upgraded to 400 kW with the same energy. Accelerated proton beams lose approximately 20% of the power at the target, and the remaining power is concentrated in the beam direction. Therefore, to ensure safe operation of the facility, concentrated protons must be distributed and absorbed at the beam dump. Additionally, effective dose levels must be lower than the legal standard, and the beam dumps used at 100 kW should be reused at 400 kW to minimize the generation of radioactive waste. In this study, we introduce a tailored method for designing beam dumps based on the characteristics of the µSR facility. To optimize the geometry, the absorbed power and effective dose were calculated using the MCNP6 code. The temperature and stress were determined using the ANSYS Mechanical code. Thus, the beam dump design consists of six structures when operated at 100 kW, and a 400 kW beam dump consisting of 24 structures was developed by reusing the 100 kW beam dump.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.551-560
• /
• 2012

The Wolsong-1 (W-1) Phase-B pre-simulations were carried out in preparation for tests to be conducted for the restart of the reactor after a major refurbishment project that included replacement of the pressure tube. These pre-simulations for Wolsong-1 Phase-B differ from those in the past that were performed for the Wolsong-1,2,3,4 tests in that these tests use the WIMS/DRAGON/RFSP-IST code suite for verification of the tests and gadolinium instead of the traditional PPV/MULTICELL/RFSP code system and boron as poison in the moderator system. The use of gadolinium is deemed not to have domestically accumulated experience gained from the previous Phase-B tests. Thus, it is appropriate to conduct a study in order to gain a correct understanding and interpretation of potential differences in test results stemming from using gadolinium rather than boron. Although the calibration of the reactivity device will not be noticeably different using boron and gadolinium at a constant moderator temperature, the temperature dependency of the neutronic behavior due to the presence of gadolinium in the moderator system might be pronounced. The results of the pre-simulations using gadolinium revealed that the moderator temperature reactivity coefficients indeed showed significant differences in comparison with those with boron. In order to secure the validity of the analysis results, the newly acquired WIMS/DRAGON/RFSP-IST code suite was verified against the W-2,3,4 Phase-B test results. The results of the new code suite verifications revealed some overall improvements in accuracy; justification of the use of the code can be claimed for the validation of the W-1 Phase-B test results.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.1
• /
• pp.31-39
• /
• 2017

In this study, to estimate the combination of earthquake magnitude ($M_w$) and distance (R) corresponding to the design spectrum defined in Korean Building Code (KBC) 2016, the response spectra predicted from the attenuation relationships with the variation of $M_w$ (5.0~7.0) and R (10~30km) are compared with the design spectrum in KBC 2016. Four attenuation relationships, which were developed based on local site characteristics and seismological parameters in Southern Korea and Eastern North America (ENA), are used. As a result, the scenario ground motions represented by the combinations of $M_w$ and R corresponding to the design spectrum for Seoul defined in KBC 2016 are estimated as (1) when R =10 km, $M_w=6.2{\sim}6.7$; (2) when R = 15 km, $M_w=6.5{\sim}6.9$; and (3) when R = 20 km, $M_w=6.7{\sim}7.1$.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.665-674
• /
• 2013

This paper presents the development and validation methods of the FUTURE (FUel cycle analysis Tool for nUcleaR Energy) code, which was developed for a dynamic material flow evaluation and economic analysis of the nuclear fuel cycle. This code enables an evaluation of a nuclear material flow and its economy for diverse nuclear fuel cycles based on a predictable scenario. The most notable virtue of this FUTURE code, which was developed using C# and MICROSOFT SQL DBMS, is that a program user can design a nuclear fuel cycle process easily using a standard process on the canvas screen through a drag-and-drop method. From the user's point of view, this code is very easy to use thanks to its high flexibility. In addition, the new code also enables the maintenance of data integrity by constructing a database environment of the results of the nuclear fuel cycle analyses.