• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.4
• /
• pp.281-287
• /
• 2000

Major chemical components of sweet drink and vinegar prepared with Liriopis tuber were investigated sensory quality. The contents of total soluble solid, total sugar, non-reducing sugar, total saponin, ash and protein in the processed of LIriopis products ranged 7.71~10.67%, 4.94~9.77%, 1.98~4.67%, 0.80~0.59%, 0.40~0.36%, and 0.44~0.49%, respectively. In addition, levels of succinic, malic and acetic acid in the products ranged 78.9~96.3, 23.6~6.3 and 12.7~2686.0mg/100ml respectively. Meanwhile, the sweet drink contained 1.89mg%(w/v) of hydroxyprolin, 0.39mg%(w/v) of glutamic acid, 0.22mg%(w/v) of arginie, 0.15mg%(w/v) of citruline and 0.11mg%(w/v) of potassium. The vinegar contained 2.89mg%(w/w) hydroxyprolin, 248.2$\mu$g/100ml glutamic acid, 99.2$\mu$g/100ml arginine, 205.5$\mu$g/100ml citruline and 143.46$\mu$g/100ml potassium.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.143-152
• /
• 1988

This study was conducted to obtain basic data which affected engine performance of the power tiller being widely used in the rural area. Among the various factors affected engine performance, only flywheel weight was considered as the major factor in this study. Fuel consumption ratio, motoring loss, torque, vibration and mechanical efficiency of the engine tested were measured and analyzed on the four levels of flywheel weight (32.2, 29.7, 26.4, 24.2 kg). The results obtained were as follows: 1. The maximum output of 6 and 7.5 kW engine was 7.43 kW and 7.85 kW respectively. When flywheel weight was reduced from 32.2 kg to 24.2 kg, output power of the engine was increased 0.27 kW in 6 kW engine and increased 0.39 kW in 7.5 kW engine. 2. The fuel consumption ratio was decreased from 300.8 to 296.8 g/kW-hr in 6 kW engine and decreased from 313.6 to 312.8 g/kW-hr in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 3. The mechanical efficiencies of the engine was increased from 76.1 to 76.8% in 6 kW engine and increased from 76.7 to 77.0% in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 4. When the flywheel weight was reduced from 32.2 kg to 24.2 kg, a tendency of a little decrease of vibration at X- and Z-axis in 6 kW engine and of a little increase of vibration at Y-axis in 6 kW engine and all directions in 7.5 kW engine was observed. 5. Motoring losses was decreased from 2.33 to l.76 kW in 6 kW engine and decreased from 2.46 to 1.84 kW in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. From the above results and the flywheel weight calculated theoretically, it was recommendable that the flywheel weight should be reduced about 7 kg in 6 kW engine and about 10 kg in 7.5 kW engine, respectively.

• Journal of Veterinary Clinics
• /
• v.40 no.1
• /
• pp.44-49
• /
• 2023

The purpose of this study was to evaluate body temperature changes in rabbits anesthetized using water-filtered infrared-A (wIRA). Ten rabbits were used for this study. For the experimental group (wIRA group; wG, n = 5), the experimental equipment was used and irradiated using wIRA. The control group (CG, n = 5) did not have any warming device. There were no significant differences in heart rate, respiration rate, and end tidal CO₂ (EtCO₂) between wG and CG. After 80 min, the core body temperature of wG rabbits was significantly higher than that of CG rabbits. The surface body temperature was significantly higher while receiving wIRA support at all time points after 5 min. In conclusion, in rabbits under inhalation anesthesia, the surface body temperature was better maintained than the core body temperature when using wIRA.

• Genomics & Informatics
• /
• v.2 no.2
• /
• pp.75-80
• /
• 2004

In a variety of animal species, the perinatal exposure of experimental animals to the 2,3,7,8-tetrachlorodibenzo­p-dioxin (TCDD) leads to the immune dysfunction, which is more severe and persistent than that caused by adult exposure. We report here the changes of gene expression and the identification of the marker-genes representing the dioxin exposure. The expressions of the transcripts were analyzed using the 11 K oligonucleotide­microarray from the bone marrow cells of male C57BL/6J mice after an intraperitoneal injection of $1{\mu}g$ TCDD/kg body weight at various time intervals: gestational 6.5 day(G6.5), 13.5 day(G13.5), 18.5 day(G18.5), and postnatal 3 (P3W)and 6 week (P6W). The type of self-organizing maps(SOM) representing the specific exposure dioxin could be identified as follows; G6.5D(C14), G13.5D(C0, C5, C10, C18), G18.5D(7): P3W(C2, C21), and P6W(C4, C15, C20). The candidate marker-genes were restricted to the transcripts, which could be consistently expressed greater than $\pm$2-fold in three experiments. The resulting candidates were 85 genes, the characteristics of that were involved in cell physiology and cell functions such as cell proliferation and immune function. We identified the biomarker-genes for dioxin exposure: smc -like 2 from SOM C14 for the dioxin exposure at G6.5D, focal adhesion kinase and 6 other genes from C0, and protein tyrosine phosphatase 4a2 and 3 other genes from C5 for G13.5D, platelet factor 4 from C7 for G18.5D, fos from C2 for P3W.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.1008-1016
• /
• 2013

SAR measurement which was applied only to the mobile phone has been expanded in the Korean radio regulation law to the portable wireless communication equipments within 20 cm from the human body since Jan. 2012. The two-way radio operating at 150 MHz frequency band was newly included following the revised radio regulation in the target equipment of measurement. SAR measurement system at 150 MHz satisfying this regulation is necessary accordingly for SAR conformity assessment. The international SAR measurement standard(IEC 62209-2) includes the evaluation method on frequencies above 300 MHz, and the commercial SAR measurement system can measure SAR above 300 MHz only. The size of the reference dipole antenna(760 mm, return loss: -27.57 dB) and flat phantom ($1,300 mm(L){\times}900 mm(W){\times}200 mm(H)$), targeted SAR values for numerical analysis(1 g: 1.08 W/kg, 10 g: 0.77 W/kg) for SAR validation evaluation at 150 MHz frequency are proposed in this paper. The suggested dipole antenna and flat phantom are assembled and used to verify the conformity assessment of commercial SAR measurement system. The measured SAR values of 1 g and 10 g were obtained respectively to be 1.13 W/kg, 0.81 W/kg, and they satisfied the effective range(within ${\pm}10$ %) of IEC international standard. The standards based on this study are expected to be used for the domestic SAR measurement standard and IEC(International Electrotechnical Commission) international standard.

• Microbiology and Biotechnology Letters
• /
• v.26 no.5
• /
• pp.435-441
• /
• 1998

Optimal conditions for the production of natural color, betacyanin were investigated by varying light intensity, C/N ratio, concentrations of phosphate and kinds of elicitors. Batch cultivation was employed to characterize cell growth and betacyanin production of 32 days. The maximum specific growth rate, ${\mu}$$\sub$max/, was 0.3 (1/day) for batch cultivation. The maximum specific production rate, q$\^$max/$\sub$p/, was enhanced 0.11 (mg/g-cell/day) at 3 klux. A light intensity of 3 klux was shown to the best for both cell growth and betacyanin production. The maximum specific production rate was 0.125 (mg/g-cell/day) at 0.242 (1/day), the maximum specific growth rate. The dependence of specific growth rate on the light lintensity is fit to the photoinhibition model. The correlation between ${\mu}$ and q$\sub$p/ showed that the product formation parameters, ${\alpha}$ and ${\beta}$$\sub$p/ were 0.3756 (mg/cell) and 0.001 (mg/g-cell/day), respectively. The betacyanin production was partially cell growth related process, which is different from the production of a typical product in plant cell cultures. In C/N ratio experiment, high carbon concentration, 42.1 (w/w) improved cell growth rate while lower concentration, 31.6 (w/w) increased the betacyanin production rate. The ${\mu}$$\sub$max/ and q$\^$max/$\sub$p/ were 0.26 (1/day) and 0.075 (mg/g-cell/day), respectively. Beta vulgaris L. cells under 1.25 mM phosphate concentration produced 10.15 mg/L betacyanin with 13.46 (g-dry wt./L) of maximum cell density. The production of betacyanin was elongated by adding 0.1 ${\mu}$M of kinetin. This also increased the cell growth. Optimum culture conditions of light intensity, C/N, phosphate concentration were obtained as 5.5 klux, 27 (w/w), 1.25 mM, respectively by the response surface methodology. The maximum cell density, X$\sub$max/, and maximum production, P$\sub$max/, in optimized conditions were 16 (g-dry wt./L), 12.5 (mg/L) which were higher than 8 (g-dry wt./L), 4.48 (mg/L) in normal conditions. The ${\mu}$$\sub$max/ and q$\^$max/$\sub$p/ were 0.376 (1/day) and 0.134 (mg/g-cell/day) at the optimal condition. The overall results may be useful in scaling up hairy root cell culture system for commercial production of betacyanin.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.150-154
• /
• 2005

To overcome the problems associated with chemical pesticides, biological pest controls agent extracted from Ginkgo biloba was studied. Insecticidal activities components in Ginkgo biloba extracts were analyzed using high performance liquid chromatography (HPLC). This results of HPLC analysis, GG-W80 were included bilobalide $611\;{\mu}g/kg$, ginkgolide A $37\;{\mu}g/kg$ and ginkgolide B $243\;{\mu}g/kg$, while YG-W80 were included bilobalide $214\;{\mu}g/kg$ and ginkgolide B $46\;{\mu}g/kg$. The biological activity of Ginkgo biloba extracts were conducted to repellent and pesticidial effect of Tetranichus urticae, Aphis gossypii and Myzus persicae treated with Ginkgo biloba leaves extracts. Mortalities of adult T. urticae to green Ginkgo biloba extracts (GG-W80) and yellow Ginkgo biloba extracts (YG-W80) were shown 98.3% and 20.0%, respectively. From these results, terpenes components in Ginkgo biloba extracts could be use for biological controls for T. urticae.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.105-113
• /
• 2006

This paper presents the results of an experimental investigation carried out to evaluate the mechanical properties of concrete mixtures in which fine(S) and coarse(G) aggregate was fully replaced with fly ash(FA). And flowability reduction problem in a large amount of fly ash concrete settled addition water($W_f$) in concrete mixture. In the test, water-cement ratio($W_c/C$) was 0.35, 0.45, and water-fly ash ratio($W_f/FA$) was 0.35, 0.45. The fly ash replacement is two different method of P and Q. The P method is mix property that the fly ash and addition water($W_f$) weight is equal to the aggregate weight [ $FA+W_f$ = G (or S)]. The Q method is mix property that fly ash is equal to aggregate weight, and added addition water($W_f$) [$FA+W_f$ > G (or S)]. Test were performed for properties of fresh concrete and compressive strength were determined at 3, 7, 28 and 91 days. The result, compressive strength was improvement that $W_c/C=0.35$, $W_f/FA=0.35$ and fine aggregate replacement in P method series than others. The flowability at Q method was improvement result than P method, but compressive strength was not. Test results indicate significant improvement in the strength properties and flowability of plain concrete by the inclusion of fly ash as fully replacement of fine and coarse aggregate, and can be effectively the fly ash replacement method.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.2
• /
• pp.124-129
• /
• 2006

The grades of burley tobacco stems and scraps were classified followed by the nicotine and nitrate contents by using the cluster analysis. The chemical components of the burley tobacco stems and scraps gathered from 2002 to 2005 were analyzed with auto analyzer. According to the nicotine contents and the nitrate contents, the burley stems and scraps could be classified three groups, respectively. In case of the burley scraps, the AB3T, AB4TR, B1T and B2T grades belonged to the $1^{st}$ a group. The C1W and C2W grades belonged to the $2^{nd}$ group and the CD3W and CD4TR belonged to the $3^{rd}$. In case of the burley stems, the AB3T and AB4TR grades belonged to the $1^{st}$ group. The B1T, B2T, C1W and C2W grades belonged to the $2^{nd}$ group and the CD3W and CD4TR belonged to the $3^{rd}$ group. This classification of raw materials depending on the similarity in the chemical components might be helpful to control the properties of the Reconstituted Tobacco sheet.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.236-241
• /
• 2019

This paper will read about a multichannel frequency-modulated continuous wave (FMCW) radar sensor with switching transmit (TX) antennas is developed at W-band. To achieve a high angular resolution, a uniform linear array consisting of 5 switching-TX and 12 receive (RX) antennas is employed with the digital beamforming technique. The overall radar front-end module comprises a W-band transceiver and TX/RX antennas. A multichannel transceiver module consists of 5 up-conversion and 12 down-conversion channels, where one of the TX channels is sequentially switched ON. For developing transmitter, we developed an HPA (high power amplified) MMIC chip for W-band radar system and fabricated a transmitter module using this chip. In order to develop the W-band transmitter, we analyzed the important antenna transition structure from HPA MMIC line to W/G (Waveguide)antenna via M/S(microstrip) and fabricated it with 5 transmission channels. As a result, the output power of the transmitter was within 1 dB of the error range after analysis and measurement under normal temperature and environmental conditions.