• Journal of the Korean Magnetic Resonance Society
• /
• v.5 no.2
• /
• pp.110-117
• /
• 2001

$^{19}$ F imaging of mice was carried out. For $^{19}$ F imaging, 5-flouro-uracil (5-FU) was injected into a mouse and in vivo detection of the catabolism of 5-FU to a-fluoro-P-alanine (FBAL) was carried out. The chemical shift selective (CHESS) imaging technique was employed. The 19F spectra and images give temporal and spatial information of the metabolism for 5-FU in mice.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.146-153
• /
• 2008

High-power communication jammer has to include the switched filter bank to eliminate the harmonic signals generated by amplifier. Generally, the switched filter bank consists of in-out switches and several filters. This paper describes the design of high-power switched filter bank, particularly the high-power filter bank operating over 20$\sim$110MHz frequency range. The filters designed have insertion loss less than 0.3dB, VSWR less than 1.25:1, and harmonic suppression more than 35dB. Also, the switched filter bank can endure upto 2kW high-power signal with very low harmonic level within $30{\mu}s$ switching speed.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.110-115
• /
• 1998

An axisymmetric Navier-Stokes procedure has been developed to analyze the pulse jet flow in a ceramic filter unit for the dust dislodging process. Using Baldwin-Lomax turbulence model as a closure relationship, the SIAF(Scalar Implicit Approximate Factorization) algorithm together with the ${\delta}^k-Correction$ iterative time marching scheme is adopted to solve the unsteady compressible Navier-Stokes equations. After some validation tests, the code has been applied to solve the pulse jet flow and examine the effects of geometry and reservoir pressure condition on the pressure level inside the filter unit. To avoid dealing with the uncertainty of such factors as the cohesion of the collected dust and the adhesion of the dust to the medium and also to simplify the analysis, the filter wall is assumed to be impermeable. The results for various test cases are presented.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.110-114
• /
• 2002

Generally, brushless DC motor(BLDCM) driving system uses hall sensors or encoders as the mechanical position or speed sensors. It is necessary to achieve the informations of rotor position for driving trapezoidal type brushless DC motor without any position sensor. This paper proposes a sensorless driving system with rotor absolute position detector circuit which acquires both commutate phase and commutate time by analyzing motor phase voltages. Proposed system is applied to a 10k[W] rating motor which actually used in electrical vehicles of HONDA co.,ltd. The experimental results will show the validity of the proposed system and the practical use of proposed sensorless drive algorithm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.284-289
• /
• 2004

Since polymer materials at elevated temperatures are usually rate-sensitive, the analysis of RTP process requires considering the effect of the rate-dependent. The material behavior that exhibits rate-sensitivity is called visco-plastic. A two-dimensional visco-plastic finite element formulation which constitutive equation is based on the formulation proposed by Perzyna is presented. This Paper is purposed to calcuate pressure distribution on PMMA in compression process and to predict the relationship with defects after demolding process. This paper analyzes, both analytically and numerically, the pressure distributions on the surface of PMMA during open-die RTP process. In this research, PMMA is used to be simulated at $110^{\circ}C$ near the transition temperature.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.242-244
• /
• 2015

ZnO:Ga thin films were deposited by RF magnetron sputtering technique from ZnO (3 wt.% $Ga_2O_3$) target onto glass substrates under various RF power. The influence of RF power on the structural, electrical, and optical properties of ZnO:Ga thin films was investigated by X-ray diffraction, atomic force microscopy, Hall method and optical transmission spectroscopy. As the RF power increases from 50 to 110W, the crystallinity is deteriorated, the root main square surface roughness is decreased and the sheet resistance is increased. The increase of sheet resistance is caused by decreasing carrier concentration due to interstitial Ga ion. All films are transparent up to 80% in the visible wavelength range and the adsorption edge is a red-shift with increasing RF power.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.59-59
• /
• 2000

Recently low resistance of bus line is required for large screen size TFT-LCD panels. As a result, lower resistance Al-alloy is currently reviewed extensively. The resistivity is required smaller than 10 $\mu$$\Omega$cm. In this paper, Al-Nd thin film were deposited on glass substrates by D.C. magnetron sputtering system under various condition. Its properties were characterized by SEM, AFM, XRD, 4-ping-probe. The optimal condition of Al-Nd was 12$0^{\circ}C$, 125W, 0.4Pa, 30sccm(Ar) and 35$0^{\circ}C$, 20min. annealing. At that condition the resistivity of Al-Nd(2wt.%) was about 4 $\mu$$\Omega$cm. The minimum contact resistance of ITO/Nd was about 110$\mu$$\Omega$cm in the condition of 30$0^{\circ}C$, Ar 30 sccm. O2.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2000.11a
• /
• pp.108-110
• /
• 2000

A 12-w feeding trial was conducted with 600 38-wk-old layers to evaluate the nutritive value of high oil corn(HOC) in layer diets. For the control, a commercial corn-soybean meal basal diet was used. An iso-calorie diet(HOC-ISO) was prepared replacing corn with HOC in the control diet. In addition a third diet was prepared by simply replacing corn with HOC on 1:1 basis to give a high energy diet(HOC-1:1). There were 5 replicates per treatment, and 40 birds per replicate. Birds were housed in an open-sided layer house equipped with wire cages. Feed and water were provided ad libitum, and 17L:7D lighting program was adopted. No significant difference (P>0.05) was found among dietary treatments in laying performance. Also physical qualities of eggs were not significantly affected by the feeding of HOC. Although not significant, HOC-ISO tended to improve the laying rate during the summer. The HOC feeding significantly increased the polyunsaturated fatty acids contents in egg yolk, especially the linoleic acid The AME contents of Chinese yellow corn, U.S. corn, and HOC were 3177, 3158 and 3387 kcal/kg respectively.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.107-110
• /
• 1996

연료전지 발전방식중 용융탄산염형 연료전지 발전방식은 동작온도가 $650^{\circ}C$의 고온에서 동작되기 때문에 발전효율이 높고 석탄가스를 연료로 사용할 수 있으며 또한 배기가스를 이용하여 복합발전시스템으로 구성할 수 있는 등 전력사업에 적용가능성이 가장 큰 새로운 발전방식이다. 이와 같은 이유로 전력연구원에서 개발하고 있는 2kW급 용융탄산염형 스택은 전극유효면적이 1,000$ extrm{cm}^2$인 단위전지를 20단 적층한 Co Flow형 MCFC스택으로, 연료로, 연료극에 H2, CO2, H2O 혼합가스를 그리고 산소극에는 공기, CO2 혼합가스를 이용하여 150A 정부하 상태에서 초기성능이 전압 14.28V, 출력 2.142W의 발전 운전시험에 성공하였고 이때 스택의 단위전지 평균전압은 0.714V를 나타내었다.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2013

The design model and key parameters of the material design for the control of induced magnetic flux at the near-field and efficient power transfer in a modified wireless power transfer (WPT) system with a large air gap of wireless electric vehicles were investigated through analytical simulations for magnetic vector and time-domain transient analysis. Higher saturation magnetic core with low core loss induced a stronger vertical magnetic field by the W-type primary coil in the WPT system with a gap of 20 cm at 20 kHz, which is shown from the vector potentials of the magnetic induction. The transient analysis shows that the higher magnetic fluxes through the pick-up cores lead to a linear increment of the alternating voltage with a sinusoidal waveform in the non-contact energy transfer system.