• 대한화학회지
• /
• 제15권6호
• /
• pp.359-366
• /
• 1971

5종의 유기 가황촉진제에 대하여 EHT법을 적용하였다. 전자밀도, 원자궤도함수의 계수 등을 이용하여 각 화합물의 촉진 반응을 검토하였으며 결과로 유기 가황촉진 반응은 라디칼 반응 임을 입증하였다

• 폴리머
• /
• 제37권3호
• /
• pp.269-275
• /
• 2013

화학적 구조가 다른 thiuram계 TMTD(tetramethyl thiuram disulfide), DPTT(dipenta-methylene thiuram tetrasulfide), thiazole계 MBT(2-mercapto benzothiazole), MBTS(2,2-dithiobis(benzo-thiazole)), sulfenamide계 CBS(n-cyclohexyl benzothiazyl-2-sulfenamide), NOBS(n-oxydiethylene benzo-thiazyl-2-sulfenamide), 아연이 포함된 thiuram계 ZDBC(zinc di-n-butyl-dithiocarbamate)를 사용하여 각각의 촉진제가 실리카와 카본블랙으로 충전된 천연 고무 복합소재의 가황 속도 및 가황 지수에 미치는 영향을 비교 평가하였다. 양 시스템에서 가황 속도는 thiuram계, thiazole계, sulfenamide계의 순서로 동일한 경향을 보였다. 각 촉진제에 대하여 실리카 컴파운드는 카본블랙 컴파운드에 비해 $t_{s2}$, $t_{10}$, $t_{90}$에 도달하는 시간이 느리게 나타났으며 느린 가황 지수(CRI)를 나타내었다.

• 공업화학
• /
• 제22권2호
• /
• pp.144-148
• /
• 2011

본 연구에서는 화학적 구조가 다른 thiuram 계 촉진제인 TMTD (tetramethyl thiuram disulfide), thiazole 계 촉진제인 MBTS (2,2-dithiobis(benzothiazole)), sulfenamide 계 촉진제인 CBS (n-cyclohexyl benzothiazyl-2-sulfenamide)를 사용하여 각각의 촉진제가 실리카가 충전된 천연고무의 가황 특성에 미치는 영향을 비교 평가하였다. TMTD는 상대적으로 빠른 가류 속도와 높은 최대 토크값($T_{max}$), 우수한 기계적 물성을 보였고 MBTS는 상대적으로 중간 정도의 가황 시간과 낮은 $T_{max}$, 기계적 물성을 보였다. 마지막으로 CBS는 느린 가황 시간을 나타낸 반면 상대적으로 우수한 $T_{max}$와 기계적 물성을 나타냈다. 유사한 가황 특성 경향은 카본블랙이 충전된 천연고무 컴파운드에서도 찾아볼 수 있었다.

• Elastomers and Composites
• /
• 제17권3호
• /
• pp.151-158
• /
• 1982

The purpose of this study is to get comparitive results on the combined accelerator systems comprised of MBT, MBTS, DPG and CBS with TMTD, TMTM, Zn-MDC and DPG to SBR compound. Vulcanization characterstics and physical properties of the combined accelerators have been studied by mean of the Mooney viscometer, tensile testing machine, aging chamber and so on. According to the test results, TMTD with DPG system has shown faster Mooney scorch time than other system. The vulcanizate comprise of Zn-MDC with DPG and TMTD with DPG accelerator system has taken advantage of heat resistance.

• 공업화학
• /
• 제22권4호
• /
• pp.411-415
• /
• 2011

본 연구에서는 화학적 구조가 다른 thiuram계 tetramethyl thiuram disulfide (TMTD), dipenta methylene thiuram tertasulfied (DPTT), thiazole계 2-mercapto benzothiazole (MBT), 2,2'-dithiobisbenzothiazole (MBTS), sulfenamide계 n-cyclohexyl benzothiazyl-2-sulfenamide (CBS), n-oxydiethylene benzo-thiazyl-2-sulfenamide (NOBS)를 사용하여 각각의 촉진제가 실리카가 충진된 천연고무의 가황 특성 및 기계적 물성에 미치는 영향을 비교 평가하였다. TMTD는 상대적으로 빠른 가류 속도와 높은 최대 토크값($T_{max}$), 우수한 기계적 물성을 보였고 MBT, MBTS는 상대적으로 중간 정도의 가황 시간과 $T_{max}$, 기계적 물성을 보였다. 마지막으로 NOBS는 느린 가황 시간과 낮은 기계적 물성을 나타낸 반면 중간 값의 $T_{max}$를 나타냈다.

• Elastomers and Composites
• /
• 제14권2호
• /
• pp.83-102
• /
• 1979

The purpose of this dissertation is to study some of the vulcanization characteristics of rubber-bound antioxidants such as G-1, [N-(3-methacryloyloxy-2-hydroxypropyl)-N'-phenyl-p-phenylene diamine] and acryl, acrylamide & acrylester substituted hindered phenols. The influence of these antioxidants upon vulcanization characteristics in NR and SBR compounds in the presence of vulcanizing accelerators such as MSA, TT, DM, M & D was evaluated by means of Oscillationg Disk Cure Meter. The comparison was also made between the influence of rubber-bound antioxidants and that of conventional non-reactive antioxidants such as N-alkyl substituted PADA series. Regarding the influence of reactive type antioxidant G-1 mixed with accelerator TT upon vulcanization characteristics, rapid onset of vulcanization and higher degree of cross-linking were discovered, whereas in the case of accelerator M and DM, the result was slow onset of vulcanization and lesser degree of cross-linking. The comparison of vulcanizing characteristics among acrylic substituted hindered phenols as antioxidants was made under several vulcanization accelerator systems. Under such systems, MSA-S combined accelerator caused the onset of vulcanization to slow down and lowered the degree of cross-linking. Finally in the case of hindered phenol derivatives containing longer substituent, the delayed onset of vulcanization and the lowered degree of cross-linking could be discerned.

• Elastomers and Composites
• /
• 제19권1호
• /
• pp.13-31
• /
• 1984

The purposes of this dissertation are to demonstrate that DSC theromoanaytical methods of vulcanization can provide useful informations on the vulcanization characteristics of industrial formulations and also provides the potential basis for a rapid and complete method of sulfur and vulcanizing accelerator analysis for quality control. The influences of those factors such as heating rate, scan temperature, vucanizing accelerator's type and concentration upon vulcanization exotherm in NR and NBR compounds in the presence of vulcanizing accelerators such as TMTD,MBTS,DPG,TMTM,CBS, and MBT were evaluated by means of DSC. In order to examine the credibility in the DSC method, the same samples which were used for DSC method were studied to compare the DSC results with the ODR (Oscillating Disk Rheometer) data. The results obtained were as follows 1. In the DSC dynamic experiments, the observed enthalpy results from vulcanization depends upon the heating rate; In the range of 2 to $20^{\circ}C/min$ of heating rate, as the heating rate was increased the enthalpy change was also increased. However, over the heating rate of $30^{\circ}C/min$ it was observed that the enthalpy change was decreased as the heating rate was further increased. Without regard to the change of enthalpy, tremendous instantaneous heat evolving was observed in the range of high heating rates. 2. For the samples which are added with various vulcanizing accelerators, the activation energies of vulcanization were as follows; 3. Regarding to the influences of vulcanizining accelerator's types upon the characteristics of vulcanization exotherm, NR and NBR compounds in the presence of thiuramsulphide compounds type accelerators such as TMTD, TMTM, were exhibited sharper and higher vulclanization exotherm than others. From the resuts of DSC thermograms which was distributed in even shape in the broad temperature range, it was clearly shown that the guanidine compounds type accelerator such as DPG acts as a delayed acting accelerator. 4. In the comparison of DSC and ODR results, the dependency of temperature in the cure rate and the observed conversions show good agreements between two results. 5. In the same curatives, by the comparison of glass transition temperatures, it was possible to predict relative values of maximum torques. Consequently, from the present studies, it is shown that the DSC thermoanalytical method can provide an alternate new method for rapid and complete quality control analysis of rubber industry.

• Elastomers and Composites
• /
• 제17권4호
• /
• pp.215-225
• /
• 1982

The purpose of this study is to get comparitive results on the combined accelerator systems comprised of MBT, MBTS, DPG and CBS with TMTD, TMTM and Zn-MDC to SBR compound. Vulcanization characterstics and physical properties of the combined accelerators have been studied by means of the Mooney viscometer, the Monsanto disc rheometer, tensile testing machine, aging chamber and so on. According to the test results, DPG, MBT and Zn-MDC system have show faster Mooney scorch time and optimum cure time than other systems. The Vulcanizate comprise of DPG, MBT and TMTD accelerator system has taken adventage of tensile strength, elongation, 100% modulus, resilience, compresion set.

• Elastomers and Composites
• /
• 제22권4호
• /
• pp.333-339
• /
• 1987

A modern kinetic evaluation method for nonisothermal reactions measured with Differential Scanning Calorimetry(DSC) is presented. It is based on multiple linear regression analysis using a number of curve points in a selectable range of conversion. The obtained kinetic data are the basis to compute a reaction process under any condition e.g. isothermal or adiabatic. The DSC measurements was performed on a Mettler TA3000 SYSTEM with the built in evaluation software. Mainly the following reactions are discussed: vulcanization of natural rubber compounds containing vulcanizing accelerators. The purpose of this work is to analyse the vulcanization kinetics of typical NR vulcanization systems using DSC. These systems were chosen because they are typically reactive elastomer and are commercially important.

• 폴리머
• /
• 제38권3호
• /
• pp.406-410
• /
• 2014

아연이온이 포함된 thiuram 구조를 가진 zinc dibutyldithiocarbamate(ZDBC)와 아연이온을 포함하고 있지 않은 thiuram계 촉진제인 tetramethylthiuram disulfide(TMTD), dipentamethylenethiuram tetrasulfide(DPTT)를 실리카가 충전된 천연고무에 첨가하여 가황특성 및 기계적 물성(모듈러스, 인장강도, 신장률)에 미치는 영향을 비교 평가하였다. ZDBC는 가장 빠른 반응개시시간(t10)과 높은 보강성(R.I.), 그리고 marching 거동을 보였다. 메커니즘을 고찰하고 제시하였다.