• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1025-1030
• /
• 2016

The big problem of accidents at sea is negligent watch, it causes collision, fender bender, stranding, rollover, and sinking of fishing vessel. Most accidents happens without an eyewitness, it is difficult to identify the cause of the accident. VDR(: Voyage Data Recorder) is needed to identify a cause of the accident, the VDR is not usually used for fishing vessel because of high cost. Thus, this paper designs and develops a VDR system for fishing vessel. If the system is used, cause of a sea accident can be quickly identified. Also, a VDR system can be used for appropriate measures to fix a cause of the accident. Finally, it also can be helpful to prevent maritime accidents.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.927-933
• /
• 2014

Ship Power Management System(SPMS) based on Communication Network(CN) is one of the most significant factor for a safe voyage. Therefore, most of the vessels are using greater capacity generator than necessary to prevent pulsating load for safety purposes. However, It provokes low-load damage and reduces generator efficiency that using large capacity generator. Accordingly, in this paper propose hybrid power system for prevent damage of pulse load. Simulation using NI's LabVIEW was conducted for the design of the power system based on actual navigation data of the ship. Also, propose applying methods for hybrid power system in connection with the auxiliary power system for safe navigation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5442-5447
• /
• 2013

This paper focuses on development of SCAAM(Ship Collision Avoidance Assignment Model) for avoiding ship collison at sea. We take a new look at DCPA, TCPA, VCD, collision concept for ship collision avoidance and propose SCAAM using DCPA pre-assignmented by a ship master on information collected by other ship's AIS, GPS (course-speed, destination, length, width, tonnage etc). If A ship is a collision situation, the ship master makes a decision where the ship makes a evasion voyage or not continually using SCCAM. If ship master decides a evasion voyage, the ship is voyaged by CORLEGS (International Regulations for Preventing Collisions at Sea). This paper contributes to safety navigation by decreasing the ship collision accident by human's error.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.427-438
• /
• 2019

It was important to estimate the full-scale operating performance including actual RPM and engine power of a ship since the operation efficiency during a voyage could be evaluated from the values. In the previous research, an entire voyage was simulated by following recorded speeds obtained from AIS and full-scale measurement data. Although reasonable tendencies were observed in the estimated speed, actual RPM, and engine power, it was impossible for them to be completely corresponded with the measured values due to the difference between actual operation and mathematical model. In this paper, alternative approaches to cope with the speed, actual RPM, and engine power were suggested by following the given speed, RPM, and power respectively. After entire voyages were simulated according to a given value, the effects of the value on the estimated performance were investigated. And, it was confirmed that the appropriate approach could be differently chosen according to the aim of the simulation or given value.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.3
• /
• pp.263-269
• /
• 2015

This paper proposes a new approach for solving the weather routing problem by dividing it into two phases with the goal of fuel saving. The problem is to decide two optimal variables: the heading angle and speed of the ship under several constraints. In the first phase, the optimal route is obtained using the Real-Time Adaptive A* algorithm with a fixed ship speed. In other words, only the heading angle is decided. The second phase is the speed scheduling phase. In this phase, the original problem, which is a nonlinear optimization problem, is converted into a geometric programming problem. By solving this geometric programming problem, which is a convex optimization problem, we can obtain an optimal speed scheduling solution very efficiently. A simple case of numerical simulation is conducted in order to validate the proposed method, and the results show that the proposed method can save fuel compared to a constant engine output voyage and constant speed voyage.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.343-348
• /
• 2010

As the marine transportation has increased, the safe maneuvering system has been required. SOLAS obligated regulations for carrying AIS(Automatic Identification System) onboard. This system provides navigational information including identification, classification, position, a ship's course and voyage status from own vessel to ground and other vessels. Being utilized in the most development of application service for safe maneuvering, they are to be managed systematic. In this paper, we introduce a database system to manage the voyage status and navigational information of AIS message. It is classified by static or dynamic. An electronic navigational chart display system is implemented to verify the design.

• Journal of the Korean Institute of Navigation
• /
• v.7 no.2
• /
• pp.65-113
• /
• 1983

A lot of studies of ship's economy are on the traditional fields such asreducing propulsion resistance, raising cargo handling rates and lessening building consts, but there are few researches on the merchant ship's economy concerning their deadweights and speeds according to shipping companies managerial cercumstances. Contrary to the contemporary trend that "the bigger, the better, if the cargo handling rate could increased sufficiently to hold down port time to that rate of smmaler vessels", this paper demonstrates the existence of certain limits in ship's size and speed according to the coditions of the freight rates, voyage distances, cargo handing rates, prices of fuel oil, interst rates etc. Fom the curves of criteria contour for various ship's deadweights and speeds which are depicted from the gird search method, one can get the costs and the yearly profit rates under the conditiions of large volume with long term contracts for the transportation of bulk cargoes. In estimating ship's transportation economy, the auther takes the position that the profit rate method is properer than the cost method, and introduces the calculation table of the voyage profit rate index. The use of the criteria contours will be of help to ship owners in determining the size and speed of the ship which will be built or purchased and serve in a certain trade route.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.184-198
• /
• 2020

Decisions of the design speed, MCR, and engine capacity have been empirically made by assuming the value termed the sea margin. Due to ambiguity regarding the effect of some factors on the sea margin, the value has been commonly decided based on experience. To evaluate the value from a new viewpoint, it is necessary to construct an approach to estimate the sea margin through an objective procedure based on a physical and mathematical model. In this paper, a framework to estimate the actual sea margin of an LNGC based on the maneuvering equations of motion is suggested by considering the hull, propeller, rudder, and given sea route under wind and waves. The fouling effect is additionally quantified as the increase of total resistance by considering the re-docking period. The operation data is reviewed to amend the increase of the total resistance considering the speed loss of a ship. Finally, the factor of how much the resistance increases due to fouling is newly obtained for the vessel. Based on the comparison of the estimated sea margin with the empirical range of the sea margin, the constructed framework is regarded as feasible.

• Journal of Korea Trade
• /
• v.27 no.3
• /
• pp.119-146
• /
• 2023

Purpose - As the severity of air pollution caused by the shipping industry is becoming evident, port authorities have started making efforts to reduce air pollutants. Considering the limitations of the currently implemented emission-control area (ECA) and vessel-speed reduction program (VSRP), which are narrow in the designation range and navigation behavior of ships, this study proposes an emission-control route (ECR) that can complement the aforementioned two environmental policies. Design/methodology - This study was conducted on Korea-China trade service routes (ports of call) of regular liners. This study employed vessel-specific data, which is from an automatic identification system (AIS), for 1,728 maritime transportations performed by 387 container vessels during one year (July 1, 2021, to June 30, 2022). Performing a scenario analysis, this study analyzed the effectiveness of reduced air-pollutant emissions. Findings - This study found that the implementation of ECRs could increase average voyage time by 12.38%-25.28% but reduced air-pollutant emissions by 29.02%-43.54%. Additionally, the increase in average voyage times reduces the anchorage time of ships outside ports, providing an incentive for ship operators to voluntarily participate in compliance with regulations, thereby contributing to the establishment of a virtuous cycle of air-environmental policies related to ships. Originality/value - This study aims to verify the policy effectiveness by designing an ECR scope for liner trade routes between Korea and China. Therefore, originality and the value of this study includes conceptualizing the ECR system, analyzing its environmental performance, and exploring new policies that can be implemented while complementing existing policies.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.55-73
• /
• 2011

The purpose of this study aims to analyse the effect of class arbitration under voyage charter with Asbatankvoy form. This study analyses the Stolt-Nielsen case as a data. In this case, One Class Rule requires an arbitrator to determine whether an arbitration clause permits class arbitration. The parties selected an arbitration panel, designated New York City as the arbitration site, and stipulated that their arbitration clause was silent on the class arbitration issue. The panel determined that the arbitration clause allowed for class arbitration, but the District Court vacated the award. But the Second Circuit reversed, holding that because petitioners had cited no authority applying a maritime rule of customs and usage against class arbitration, the arbitrators' decision was not in manifest disregard of maritime law; and that the arbitrators had not manifestly disregarded New York law, which had not established a rule against class arbitration. However, the Supreme Court held, imposing class arbitration on parties who have not agreed to authorize class arbitration is inconsistent with the Federal Arbitration Act.