• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2698-2705
• /
• 1994

In this paper, the fluid flow and stirring in a rectangular tank focussing on the effect of the plate length is studied numerically and experimentally. the flow model and the method of analysis are the same as those reported previously. The stirring effect changes considerably when the plate length is varied. When the plate is short, the friction at the bottom wall reduces the strength of the vortical flow resulting in a lower stirring effect. When the plate is long, the stirring effect is decreased due to the growth of the regular regions near the lower corners. The stirring effect is the best when the plate length is roughly half the width of the container.

• 에너지공학
• /
• 제10권3호
• /
• pp.266-271
• /
• 2001

투과 흐름이 있는 수평 다공질 유체층에서 부력에 의하여 발생하는 자연대류 현상을 선형 안정성 이론을 사용하여 해석하였다. 다공질 층에서의 유동 특성을 나타내기 위하여 Dacrcy 법칙을 사용하였다. 선형 안정성 해석 결과를 근거로 자연대류 발생점 근처에서 비선형 해석을 하여 열전달 상관관계를 얻었다. 해석 결과 투과 흐름의 세기가 커짐에 따라 계는 점점 안정해 지고, Darcy-Rayleigh수의 변화에 따른 Nusselt수의 변화는 감소하였다.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.427-435
• /
• 2015

This paper provides the numerical results of a simulation of the flow around a propeller working beneath the free surface. A finite volume method is used to solve the unsteady Reynolds averaged Navier-Stokes (URANS) equations, where the wave-making problem is solved using a volume-of-fluid (VOF) method. The numerical analysis focuses on the propeller wake structure affected by the free surface, where we consider another free surface boundary condition that treats the free surface as a rigid wall surface. The propeller wake under the effect of these two free surface conditions shows a reduction in the magnitude of the longitudinal and vertical flow velocities, and its vortical structures strongly interact with the free surface. The thrust and torque coefficient under the free surface effect decrease about 3.7% and 3.1%, respectively. Finally, the present numerical results show a reasonable agreement with the available experimental data.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.61-67
• /
• 2007

Numerical simulation of laminar flow over two spheres in a side-by-side arrangement is carried out to investigate the effect of the inter-sphere spacing on the flow characteristics. The Reynolds numbers considered are 100, 250, and 300, covering the steady axisymmetric, steady planar-symmetric, and unsteady planar-symmetric flows in the case of a single sphere. Results show that the drag and lift coefficients and wake structures are significantly modified depending on both the Reynolds number and the spacing between the spheres. At Re=100, the flow is steady planar-symmetric irrespective of the spacing, but it shows some variation according to the spacing at Re=250 and 300. That is, the flow maintains planar symmetry of the single-sphere wake at large spacings, while it loses the symmetry at small spacings due to the generation of new asymmetric vortical structures. It is also shown that the drag and lift coefficients generally increase with decreasing inter-sphere spacing because the high pressure region is formed near the gap between the spheres.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.8-14
• /
• 2003

난류혼합층에서 속도비 변화에 따른 입자의 운동형태에 대하여 수치해석적 연구를 수행하였다. Turbulent closure를 목적으로 Subgrid모델을 바탕으로 한 LES를 적용하여고 입자 운동을 해석하기 위해 Lagrangian 방법을 적용하였다. 입자의 직경이 10, 50, 100, 150, 200${\mu}m$인 입자들이 분리판 끝단에서 정지한 상태로 혼합층에 유입이 되고, 큰-크기 와류구조에 영향을 받아 혼합층 내로 확산이 되어진다. 혼합층의 성장특성은 속도비 변화에 매루 민감하여, 입자의 확산은 혼합층의 속도비와 입자 직경의 변화에 따라 거동을 달리함을 알 수 있었다. 또한 Stokes 수와 입자확산의 관계를 나타내었다. 그 결과로 St~1인 경우 입자의 확산이 유동장의 확산보다 빠르게 일어나나, St<<1과 St>>1인 경우는 입자의 확산이 잘 일어나지 않음을 알 수 있다.

• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.927-936
• /
• 1998

In the fully developed pipe flow, when jet is injected in cross to the flow there are complex transition flows caused by interaction of the cross flow and jet. These interactions are studied by means of the flow visualization methods and frequency analysis using a hot-wire anemometer. The velocity range of cross flow of the pipe is 0.3 m/s ~ 1.2 m/s and the corresponding Reynolds number, R$\sub$p/, based on the pipe diameter is 2.25 * 10$\^$3/ ~ 9.02 * 10$\^$3/. The velocity ratio (R), jet velocity/cross flow velocity, is chosen from 2 to 10. A circular cylinder is placed in the pipe instead of jet to observe the vortex shedding from the solid body. To compare the jet and circular cylinder flow, the vortical structure is analyzed in both cases and the structure of vortices and the origin of its formation are investigated, especially. The vortex shedding of the dominant coherent structure is compared between the jet flow and the circular cylinder flow. In the case of the jet flow, the Strouhal numbers are different depending on the existence of the upright vortex as well as the velocity ratio (R).

• 한국전산유체공학회지
• /
• 제13권1호
• /
• pp.57-62
• /
• 2008

Laminar flows over a cube and a cuboid (cube extended in the streamwise direction) are numerically investigated for the Reynolds numbers between 50 and 350. First, vortical structures behind a cube and lift characteristics are scrutinized in order to understand the variation in vortex shedding characteristics with respect to the Reynolds number. As the Reynolds number increases, the flow over a cube experiences the steady planar-symmetric, unsteady planar-symmetric, and unsteady asymmetric flows. Similar to the sphere wake, the planar-symmetric flow over a cube can be divided into two different regimes: single-frequency regime and multiple-frequency regime. The former has a single frequency due to regular shedding of vortices with the same strength in time, while the latter has multiple frequency components due to temporal variation in the strength of shed vortices. Second, the effect of the length-to-height ratio of the cuboid on the flow characteristics is investigated for the Reynolds number of 270, at which planar-symmetric vortex shedding takes place behind a cube. With the ratio smaller than one, the flow over the cuboid becomes unsteady asymmetric flow, whereas it becomes steady flow for the ratios greater than one. With increasing the ratio, the drag coefficient first decreases and then increases. This feature is related to the flow reattachment on the side faces of the cuboid.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.414-423
• /
• 1994

The planar laminar impingement jet with a confinement plate has been studied numerically. Discretzing the convection term with the QUICKER scheme, the full Navier-Stokes equations for fluid flow were solved using the well known SIMPLER algorithm. The flow characteristics with Reynolds number and jet exit velocity profile effects on it were considered for H=3, Re=200 - 2000. Results show that vortical flow forms in turn along the confinement and impingement plates as the Reynolds number increases and such a complicated flow pattern has never been reported prior. The jet exit velocity profile is shown to do an important role in determining the position of vortex flow and its size as well as in stagnation and wall jet flow region. Parabolic jet exit profile results in peak of skin friction 1.4-1.6 times greater than that of uniform profile. The channel height effects are also studied and shown to have an effect on flow pattern similar to that of Reynolds number. Also shown is that effects of the jet exit velocity profile becomes less significant over a certain channel height.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.181-185
• /
• 2010

고체로켓모터 추진제 그레인의 핀-슬롯 표면에서의 연소로 인해 생성된 고온, 고압의 연소가스는 그레인 핀-슬롯 및 내삽노즐을 통해 외부로 방출되면서 형성되는 유동은 매우 복잡하고 다양한 형태를 가진다. 핀-슬롯형 그레인 및 내삽노즐을 가지는 고체로켓모터의 2D, 3D 스케일모델에 대한 공기유동 모사시험을 수행하였으며, 회전력 발생 등과 같은 내부유동발생 메커니즘을 규명할 수 있는 효과적인 연기-유동장 가시화 기법의 적용방법에 대한 검토가 이루어 졌다. 실험모델의 투영부를 통해 다양한 광원 및 촬영장치 방향을 이용하여, 축류 실험모델 노즐 선단부에서의 비대칭 와류튜브에 의한 선회류를 가시화하였다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.39-44
• /
• 2008

Numerical simulations of laminar flow over a sphere are conducted to investigate the effect of the Reynolds number on the characteristics of vortex shedding. The Reynolds numbers considered are between 300 and 475, covering unsteady planar-symmetric and asymmetric flows. Results show that the unsteady planar-symmetric flow can be categorized into two different regimes: single-frequency regime and multiple-frequency regime. The former has a single frequency component due to periodic shedding of the vortices with the same strength in every shedding cycle, while the latter has multiple frequency components due to cycle-to-cycle variation in the strength of shed vortices with the shedding angle fixed. The multiple-frequency planar-symmetric flow, which is newly found in the present study, occurs at Re=330${\sim}$360 between the single-frequency planar-symmetric flow and the asymmetric flow. On the other hand, the asymmetric flow occurs at Re${\geq}$365, where the vortices shed from the sphere show variation both in strength and shedding angle unlike the planar-symmetric flow. Also, it is shown that the breaking of planar symmetry is closely related to the imbalance of vortical strength between a pair of streamwise vortices.