• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.118-126
• /
• 2004

이산와류법(discrete vortex method)을 이용하여 진통하는 평판들로부터 추력발생을 연구하였다. 평판들과 후류들은 이산와류로 나타내었다. 진동하는 평판들 사이의 복잡한 공력상호작용을 정확히 계산하기 위하여 와핵모델(vortex core model)과 와핵첨가법(vortex core addition scheme)을 사용하였다. 단일 평판이 히빙진동을 할 경우 나타나는 후류를 계산하여 기존의 유동가시화 결과와 비교하였다. 피칭진동 시 평판에서 발생하는 후류형상이 평판들의 추진 특성에 미치는 영향을 조사하였다. 3가지 방식(1. 하나의 평판은 고정 다른 평판은 진동, 2. 두개의 평판이 같은 위상으로 진동, 3. 두개의 평판이 반대의 위상으로 진동)으로 진동하는 평판들의 추진특성을 계산하였다. 반대의 위상으로 진통하는 평판이 가장 큰 추진력을 보였다.

• Journal of Ship and Ocean Technology
• /
• 제1권2호
• /
• pp.19-30
• /
• 1997

The accurate prediction of the flow and the pressure distribution near the tip of the blade is crucial in determining the tip vortex cavitation inception which usually occurs on the blade tip or inside the core of the tip vortex just downstream of the blade tip. An improved boundary element method is applied to the prediction of the flow around propeller blades, with emphasis at the tip region. In the method, the Blow adapted grid and a higher order panel method, which combines a hyperboloidal panel geometry with a hi-quadratic dipole distribution, are used in order to accurately model the trailing wake geometry and the highly rolled-up regions in the wake. The method is applied to several propeller geometries and the results have been found to agree well to the existing experimental data. Inviscid flow methods are able to predict the pressures at the tip as well as the shape of the trailing wake. On the other hand, they are unable to determine the flow inside the viscous core of the tip vortex, where cavitation inception often occurs. Thus, a method is presented that treats the flow inside the viscous core. The inner flow is treated with a 2-D Clavier-stokes solution without making any assumptions for axisymmetric flow and conicity of the flow along the tip trajectory. The method can thus allow the treatment of general propeller blade configurations. The velocity and pressure distributions inside the core are shown and compared to those from other numerical methods.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.661-669
• /
• 1999

The evolutionary structure of a tip vortex in the initial period have been investigated by the two-dimensional LDV system. Circumferential and axial components of mean velocities, their turbulences and Reynolds stresses were measured by the phase averaging technique at seven different wake ages within one revolution of the rotor. Core growth was also analyzed. It was resulted that circumferential velocity components showed a Rankine combined vortex shape and their circulation profiles viewed in the radial direction were close to the n = 2 model of Vatistas' algebraic formula, while axial velocity components seemed to have the Gaussian profiles In these measured ranges with the base width of three times of core radii. Peaks of circumferential velocities and core radii showed distinct asymmetric behaviors before the wake age of $150^{\circ}$ over inboard and outboard sides of the slipstream, but they became symmetric afterwards. Turbulence profiles which had two peaks Inside the core radii in the earlier wake age were also changed to single peaks after $150^{\circ}$. These trends imply that the tip vortex was barely mature at this wake age.

• 한국해양공학회지
• /
• 제36권2호
• /
• pp.108-114
• /
• 2022

Most studies on the shape of the steady vortex ring have been based on the Stokes stream function approach. In this study, the velocity approach is introduced as a trial approach. A contour dynamics method for fluid velocity is used to analyze the Norbury-Fraenkel family of vortex rings. Analytic integration is performed over the logarithmic-singular segment. A system of nonlinear equations for the discretized shape of the vortex core is formulated using the material boundary condition of the core. An additional condition for the velocities of the vortical and impulse centers is introduced to complete the system of equations. Numerical solutions are successfully obtained for the system of nonlinear equations using the iterative scheme. Specifically, the evaluation of the kinetic energy in terms of line integrals is examined closely. The results of the proposed method are compared with those of the stream function approaches. The results show good agreement, and thereby, confirm the validity of the proposed method.

• 대기
• /
• 제31권2호
• /
• pp.171-183
• /
• 2021

The sensitivity of the extratropical jet to the stratospheric mean state is investigated by conducting a series of idealized numerical experiments using a dynamic-core general circulation model. When the polar stratosphere is forced to be cold, the extratropical jet, defined by the 850-hPa zonal wind, tends to shift poleward without much change in its intensity. The opposite is also true when the polar stratosphere becomes warm. This jet response, however, is not exactly linear. A poleward jet shift under a cold vortex is much weaker than an equatorward jet shift under a warm vortex. The jet intensity change is also larger under a warm vortex. This result indicates that the stratosphere-troposphere downward coupling is more efficient for the warm and weak polar vortex. This finding is consistent with a stronger downward coupling during stratospheric sudden warming than vortex intensification events in the Northern Hemisphere winter, possibly providing a clue to better understand the observed stratosphere-troposphere downward coupling.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.397-404
• /
• 2001

The behavior of unsteady wake vortices for the two-dimensional flat plate is simulated by a discrete vortex method. The flat plates and their wakes are represented by vortex sheets. The vortex sheets are replaced with discrete vortices. The freely deforming wake sheets are computed as a part of solution and the ground effect is included by a image method. In order to predict wake shapes accurately and to model closely coupled aerodynamic interference, a vortex core model and a vortex core addition scheme are used. The simulated wake shapes convecting behind the plates in unsteady motion are compared to a flow visualization result and other numerical results. The present results agree well with them. The present method is also applied to the aerodynamic analysis of flat plates in tandem configuration in ground effect.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.85-88
• /
• 2006

Blade-vortex interaction (BVI) is one of the most important phenomena in rotor flow since it causes undesirable intense vibration and noise. Since three dimensional Euler or Navier-Stokes solutions to BVI require very high computational cost, BVI has been approximated by airfoil-vortex interaction (AVI) in chordwise planes. To describe more realistic situations with AVI, three dimensional vortex informations such as position, core size and strength are embedded artificially to Computational Aeroacoustics (CAA) calculation at each computational time step. To implement this requirement, in this paper, a technique called free vortex embedded method was used. And the solution by this method was compared with the solution by conventional method for interaction between freely convected vortex and airfoil. For the application to three dimensional free vortex embedded CAA, two dimensional free vortex embedded CAA method was validated in advance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.735-745
• /
• 2004

A linear cascade of NACA 65-1810 profiles are investigated for tip leakage flow characteristics. and calculation results are compared with experimental result. STAR-CD commercial code was used to solve the three dimensional incompressible Navier-Stokes equation that was adopted for steady flow and high Reynolds $\kappa$- $\varepsilon$turbulent model. Numerical calculation of a linear cascade is carried out to investigate effect of tip clearance on pitchwise variations of velocity Profiles. and static pressure distributions on the blade surface at spanwise positions. In case of evolution of tip vortex core location. tip vortex geometry and static pressure at the center of the tip vortex core compared with experimental results. Calculation results are agreed well with the experimental data, and validated. The static pressure losses by tip leakage flow at 2% tip clearance were more than those at 1% tip clearance.

• Journal of Ship and Ocean Technology
• /
• 제8권1호
• /
• pp.10-30
• /
• 2004

High-fidelity RANS simulations are presented for a ducted marine propulsor, including verification ＆ validation (V＆V) using available experimental fluid dynamics (EFD) data. CFDSHIP-IOWA is used with $\textsc{k}-\omega$ turbulence model and extensions for relative rotating coordinate system and Chimera overset grids. The mesh interpolation code PEGASUS is used for the exchange of the flow information between the overset grids. Intervals V＆V for thrust, torque, and profile averaged radial velocity just downstream of rotor tip are reasonable in comparison with previous results. Flow pattern displays interaction and merging of tip-leakage and trailing edge vortices. In interaction region, multiple peaks and vorticity are smaller, whereas in merging region, better agreement with EFD. Tip-leakage vortex core position, size, circulation, and cavitation patterns for $\sigma=5$ also show a good agreement with EFD, although vortex core size is larger and circulation in interaction region is smaller.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.38-43
• /
• 2011

When draining takes place through an axially located drain port in a cylindrical tank without any prevent, a vortex with an air core occurs. In this study, semi spherical concave and convex meshes with different size inner hole are used to find the air core can suppress. The study is carried out with different values of inner hole of mesh and different install direction of semi spherical mesh using PIV and measured velocity distribution. By providing a mesh, the air core can be prevented, even if the ratio of inner hole of mesh and diameter of cylinder is around 0.66. The experimental results show that a convex mesh type is more effective to suppress the air core generation than a concave mesh type.