• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.242-250
• /
• 2006

The impacts of equivalence ratio on the flow structure and flame dynamics in a model gas turbine combustor are investigated using large eddy simulation(LES). Dynamic k-equation model and G-equation flamelet model are employed as LES subgrid model for flow and combustion, respectively. As a result of mean flow field for each equivalence ratio, the increase of equivalence ratio brings about the decrease of swirl intensity through the modification of thermal effect and viscosity, although the same swirl intensity is imposed at inlet. The changes of vortical structure and turbulent intensity etc. near flame surface are occurred consequently. That is, the decrease of equivalence ratio can leads to the increase of heat release fluctuation by the more increased turbulent intensity and fluctuation of recirculation flow. In addition, the effect of inner vortex generated from vortex breakdown on the heat release fluctuation is increased gradually with the decrease of equivalence ratio. Finally, it can be identified that the variations of vortical structure play an important role in combustion instability, even though the small change of equivalence ratio is occurred.

• 한국연소학회지
• /
• 제11권4호
• /
• pp.27-35
• /
• 2006

The impacts of equivalence ratio on flow structure and flame dynamic in a model gas turbine combustor are investigated using large eddy simulation(LES). Dynamic k-equation model and G-equation flamelet model are employed as LES subgrid model for flow and combustion, respectively. As a result of mean flow field for each equivalence ratio, the increase of equivalence ratio brings about the decrease of swirl intensity through the modification of thermal effect and viscosity, although the same swirl intensity is imposed at inlet. The changes of vortical structure and turbulent intensity etc. near flame surface are occurred consequently. That is, the decrease of equivalence ratio can leads to the increase of heat release fluctuation by the more increased turbulent intensity and fluctuation of recirculation flow. In addition, the effect of inner vortex generated from vortex breakdown on the heat release fluctuation is increased gradually with the decrease of equivalence ratio. Finally, it can be identified that the variations of vortical structure play an important role in combustion instability, even though the small change of equivalence ratio is occurred.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.289-292
• /
• 2009

다중 스월 환형 연소기의 난류 유동장을 Large Eddy Simulation(LES)와 병렬 계산 기법을 사용하여 모사하였다. 해석에 이용된 연소기 모델은 GEAE 의 LM6000 연소기이다. 연소기 내에서 와류의 생성과 소멸은 단일 인젝터 해석결과와 유사하나, 인젝터간 상호 인접구간에서의 와류의 충돌은 인젝터간 와류 강도가 다르며, 이로 인하여 복잡하고 강한 압력파가 연소실 내에 전파됨을 확인하였다. 특히 다중 스월인젝터를 모사하므로서 횡방향의 압력 진동이 수치적으로 포획되었다.

• 한국가시화정보학회지
• /
• 제8권3호
• /
• pp.12-21
• /
• 2010

Swirling flows are found in very wide range of applications, for examples, cyclone separators, spraying machines, heat exchangers and jet pumps, ect. Relatively, little work has been done on the swirl flow using flow visualization techniques. This study deals with many visualization techniques to study on swirling flow. These techniques are related to oil films methods, smoke, dye liquids, liquid crystal, stroboscope light, smoke wire, white light, naphthalene sublimation, LDV(lase doppler Velocimetry) and PIV(particle image velocimetry). The present work has handled single, annular, carved tube, swirl expansion and swirl wake using several visualization methods in the vertical and horizontal circular tube.

• 한국항공우주학회지
• /
• 제42권7호
• /
• pp.535-543
• /
• 2014

비세장형, 둥근 앞전을 가지고 스팬이 1.0m로 축소된 BWB형 UCAV에 대해 완전난류, 천이 모델을 사용하여 전산해석을 수행하였다. 자유류는 받음각 -4도부터 26도까지 50m/s이며, 평균 시위 기준 레이놀즈수는 $1.25{\times}10^6$이다. 멀티블록 6면체 격자와 함께 완전난류 모델과 천이 모델의 결과를 비교하여 천이효과가 공력 특성에 미치는 영향을 살펴보았다. 풍동 실험과 비교한 결과 양/항력 계수는 해석범위 내에서 잘 일치하였으며, 피칭 모멘트는 높은 받음각에서 작게 예측됨과 동시에 난류모델에 따라 결과가 크게 달라졌다. 압력분포와 skin friction line, 축 방향 속도장을 이용하여 와류구조의 거동과 천이현상이 미치는 영향을 살펴본 결과, 천이효과를 고려하는 것이 UCAV의 정확한 와류 구조와 공력특성 예측에 필요한 것으로 확인하였다.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1227-1238
• /
• 2000

This study examines the effects of the discretization schemes on numerical solutions of viscoelastic fluid flows. For this purpose, a temporally evolving mixing layer, a two-dimensional vortex pair interacting with a wall, and a turbulent channel flow are selected as the test cases. We adopt a fourth-order compact scheme (COM4) for polymeric stress derivatives in the momentum equations. For convective derivatives in the constitutive equations, the first-order upwind difference scheme (UD) and artificial diffusion scheme (AD), which are commonly used in the literature, show most stable and smooth solutions even for highly extensional flows. However, the stress fields are smeared too much and the flow fields are quite different from those obtained by higher-order upwind difference schemes for the same flow parameters. Among higher-order upwind difference schemes, a third-order compact upwind difference scheme (CUD3) shows most stable and accurate solutions. Therefore, a combination of CUD3 for the convective derivatives in the constitutive equations and COM4 for the polymeric stress derivatives in the momentum equations is recommended to be used for numerical simulation of highly extensional flows.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.467-473
• /
• 2007

스텔스 무인전투기 형상 주위 유동장의 수동에서의 흐름가시화 시험을 통한 기본 공력 특성 파악 연구가 수행되었다. 시험은 자유류 속도 12.7 cm/sec와 평균시위 기준 레이놀즈수 $1.4{\times}10^4$에서 수행되었다. 물감을 사용하여 가시화된 와류의 생성 및 붕괴 현상은 앞서 수행된 힘과 모멘트 측정 결과와 비교되었다. 시험 결과 낮은 받음각에서는 동체와 날개 junction 와류가 큰 영향을 주지만, 높은 받음각 영역에서는 전방동체 와류 거동이 공력에 지배적인 영향을 줌을 확인하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.10-23
• /
• 2008

The development of pre-set wavelength G$\ddot{o}$rtler vortices are studied in the boundary-layer flows on concave surfaces of 1.0 and 2.0 m radius of curvature. The wavelengths of the vortices were pre-set by thin wires of 0.2 mm diameter placed 10 mm upstream and perpendicular to the concave surface leading edge. Velocity contours were obtained from velocity measurements using a single hot-wire anemometer probe. The most amplified or dominant wavelength is found to be 15 mm for free-stream velocity of 2.1 m/s and 3.0 m/s on the concave surface of R = 1 m and 2 m, respectively. The velocity contours in the cross-sectional planes at several streamwise locations show the growth and breakdown of the vortices. Three different regions can be identified based on the growth rate of the vortices. The occurrence of a secondary instability mode is also shown in the form of mushroom-like structures as a consequence of the non-linear growth of the G$\ddot{o}$rtler vortices. By pre-setting the vortex wavelength to be much larger and much smaller than the most amplified one, the splitting and merging of G$\ddot{o}$rtler vortices can be respectively observed.

• Corrosion Science and Technology
• /
• 제19권3호
• /
• pp.115-121
• /
• 2020

In this study, erosion tests and erosion-corrosion tests of Al5083-H321 aluminum alloy were conducted at various flow rates in seawater. The erosion tests were conducted at a flow rate of 0 to 20 m/s, and erosion-corrosion tests were performed by potentiodynamic polarization method at the same flow rate. Characteristic evaluation after the erosion test was conducted by surface analysis. Characteristic evaluation after the erosion-corrosion test was performed by Tafel extrapolation and surface analysis. The results of the surface analysis after the erosion test showed that surface damage tended to increase as the flow rate increased. In particular, intermetallic particles were separated due to the breakdown of the oxide film at 10 m/s or more. In the erosion-corrosion test, the corrosion current density increased as the flow rate increased. Additionally, the surface analysis showed that surface damage occurred in a vortex shape and the width of the surface damage tended to increase as the flow rate increased. Moreover, damage at 0 m/s, proceeded in a depth direction due to the growth of pitting corrosion, and the damaged area tended to increase due to acceleration of the intermetallic particle loss by the fluid impact.

• 대한기계학회논문집B
• /
• 제35권4호
• /
• pp.385-390
• /
• 2011

본 연구에서는 미세채널과 나노채널의 교차부에 불균형 동전기성을 이용한 미세혼합기를 개발하였다. 채널 내 용액의 혼합은 인가된 전압에 의한 전기삼투유동과 미세채널과 나노채널 교차 부에서의 불균형 동전기성에 의한 와류현상에 의해 이루어진다. 미세채널은 PDMS 을 이용하여 소프트리소그래피 공정으로 제작하였고, 나노채널은 미세채널의 특정위치에 전기적 충격에 의한 PDMS 의 파괴로 매우 간단하게 제작하였다. 혼합성능을 평가하기 위하여 형광물질인 Rhodamine B 용액을 이용하여 혼합 전과 후의 형광 분포를 분석하였으며, 약 90%의 혼합을 얻을 수 있었다. 본 연구의 미세혼합기는 복잡한 공정을 요구하지 않고 매우 간단하게 제작되었으며, 생화학시료 분석을 위한 미세시스템에 활용될 수 있다.