• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.923-928
• /
• 2002

Experimental and analytical study were conducted to develop the confined model of reinforced high strength concrete tied columns subjected to monotonically increasing concentric axial compression. Twenty-one large-scale columns(260$\times$260$\times$1200mm) used high strength concrete of 50 and 85MPa were fabricated to simulate an actual structural members size. Test results indicated that gains of strength and ductility of high strength concrete columns could be increased, if efficient arrangements and volumetric ratios of transverse reinforcements were provided. The proposed model satisfactorily predicted the experimental stress-strain curves for high strength concrete up to 100MPa.

• 한국농공학회지
• /
• 제41권2호
• /
• pp.80-91
• /
• 1999

This paper presents the stress-strain , volumetric strain characteristics of the Pocheon weathered residual granite soil with variation of the initial water content under drained conditions. A series of consolidated drained triaxial compressiion tests and isotrpc compression tests with various initial water content on specimens were performed. All material parameters of Lade's double work hardening model were determined by using the results of tests. Most aspects of the soil behavior measured in the triaxial compression tests were reproduced with good accuracy by the constitutive model . Therefore double work hardening model has been shown to be applicable to weathered residual granite soil.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.587-592
• /
• 2005

Hydrolyzates from lignocellulosic biomass contain a mixture of simple sugars; the predominant ones being glucose, cellobiose and xylose. The fermentation of such mixtures to ethanol or other chemicals requires an understanding of how each of these substrates is utilized. Candida lusitaniae can efficiently produce ethanol from both glucose and cellobiose and is an attractive organism for ethanol production. Experiments were performed to obtain kinetic data for ethanol production from glucose, cellobiose and xylose. Various combinations were tested in order to determine kinetic behavior with multiple carbon sources. Glucose was shown to repress the utilization of cellobiose and xylose. However, cellobiose and xylose were simultaneously utilized after glucose depletion. Maximum volumetric ethanol production rates were 0.56, 0.33, and 0.003 g/L h from glucose, cellobiose and xylose, respectively. A kinetic model based on cAMP mediated catabolite repression was developed. This model adequately described the growth and ethanol production from a mixture of sugars in a batch culture.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.961-964
• /
• 2010

A semi-empirical fluctuation term is presented to improve a classical equation of state (EOS) for volumetric properties in the critical region. The term is based on the two assumptions: (1) The Helmholtz energy is individually divided into classical and long-range density fluctuation contribution (2) All molecules form cluster near the critical region due to long-range density fluctuation. To formulate such molecular cluster, we extended the Veytsman statistics originally developed for the cluster due to hydrogen bonding. The probability function in the statistics is modified to represent the characteristics of long-range density fluctuation vanishing far from critical region. The proposed fluctuation contribution was incorporated into the Sanchez-Lacombe EOS and the combined model with 6 adjustable parameters has been tested against experimental VLE data. The combined model is found to well represent flatten critical isotherm for methane and top of the coexistence curve for the tested components. The prediction results for caloric data are in good agreement with the experimental data.

• 대한원격탐사학회지
• /
• 제17권2호
• /
• pp.141-153
• /
• 2001

A semi-empirical polarimetric backscattering model for bare soil surfaces is presented. Based on measurements by using polarimetric scatterometers and the JPL AirSAR, as well as the theoretical models, the backscattering coefficints $\sigma$$^0_w$, $\sigma$$^0_{hh}$ and $\sigma$$^0_{vh}$, and the parameters of the copolarized phase-difference probability density function, namely the degree of correlation $\alpha$ and the copolarized-phase-difference $\zeta$, are modeled empirically in terms of the volumetric soil moisture content m$_v$ and the surface roughness parameters $k_s$ and $k_l$, where k=2$\pi$f/c, s is the rms height and l is the correlation length.

• Geomechanics and Engineering
• /
• 제25권2호
• /
• pp.75-87
• /
• 2021

Because the hydraulic/mechanical behaviour of unsaturated soil is more complicated than that of saturated soil, one of the most important issues in modelling unsaturated soil is to properly couple its stress-strain relationship with its water retention characteristics. Based on the results of a series of tests, the stress-strain relationship and the changes in suction and saturation of unsaturated completely decomposed granite (CDG, also called Masado) vary substantially under different loading/hydraulic conditions. To precisely model the hydraulic/mechanical behaviour of unsaturated Masado, in this study, the superloading concept was firstly introduced into an existing saturated/unsaturated constitutive model to consider the structural influences. Then a water retention curve (WRC) model considering the volumetric change in the soil, in which the skeleton and scanning curves of the water retention characteristics were assumed to shift in parallel in accordance with the change in the void ratio, was proposed. The proposed WRC model was incorporated into the constitutive model, and the validity of the newly proposed model was verified using the results of tests conducted on unsaturated Masado, including water retention, oedometer and triaxial tests. The accuracy of the proposed model in describing the stress-strain relationship and the variations in suction and saturation of unsaturated Masado is satisfactory.

• 한국농공학회지
• /
• 제37권1호
• /
• pp.81-89
• /
• 1995

The aim of the work described in this paper is to develope a constitutive model for the prediction of an unsaturated Soil and to confirm the application of the model, which is composed of the elastic and plastic part in consideration of the matric suction and the net mean stress. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated. And the application of the model to silty sands is con- firmed by the comparison between test and predicted results. During drying-wetting and loading-unloading processes for isotropic states, the agreement between predicted and test results are satisfactory. And predicted deviator stresses are well agreed with test results in shearing process. Overall acceptable predictions are reproduced in high confining pressure. Usefulness of the model is confirmed for the unsat- urated soil except volumetric strain, which is not well agreed with the test results due to deficiency of dilatancy of the model in low confining pressure. It is, therefore, recom- mended to study the behavior of dilatancy for an unsaturated soil.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.56-63
• /
• 2020

The heat transfer phenomenon in the vicinity of the irradiated region of a focused laser beam of a DMT process greatly affects both the deposition characteristics of powders on a substrate and the properties of the deposited region. The goal of this paper is to investigate the heat transfer characteristics of a single bead deposition of Inconel 718 powders on S45C structural steel using a laser-aided direct metal tooling (DMT) process. The finite element analysis (FEA) model with a Gaussian volumetric heat flux is developed to simulate a three-dimensional transient heat transfer phenomenon. The cross-section of the bead for the FEA is estimated with an equivalent area method using experimental results. Through the comparison of the results of the experiments and those of the analysis, the effective beam radius of the bottom region of the volumetric heat flux and the efficiency of the heat flux model for different powers and travel speeds of the laser are predicted. From the results of the FEA, the influence of the power and the travel speed of the laser on the creation of a steady-state heat transfer region and the formation of the heat-affected zone (HAZ) in the substrate are investigated.

• 한국화재소방학회논문지
• /
• 제23권4호
• /
• pp.13-18
• /
• 2009

본 연구의 목적은 구난역을 갖는 철도 터널 내부의 연기 거동 특성을 분석하는 것이다. 특히 화재 위치 변화에 따른 연기 전파 특성에 대해 수치해석을 수행하고 이때 해석 조건으로 사용되는 발열량은 터널내 풀 화재(pool fire) 실험을 통해 결정된다. 사용된 연료는 n-heptane($C_7H_{16}$)이고, 각 변의 길이가 4cm인 정사각형 풀을 이용하였다. 본 연구에서는 상용코드인 FLUENT(Ver.6.3) 를 사용하여 수치해석을 수행하였고 화원 생성 현상은 MVHS(Modified Volumetric Heat Source) 모델을 통해 모사되었다. 해석 결과, 연기가 터널을 따라 전파되면서 구난역까지 영향을 미치는 것을 확인할 수 있었으며 따라서 배연시스템의 설치가 요구됨을 알 수 있다. 또한 교행로와 방화벽이 연기 제어에 기여함을 확인하였다.

• 한국철도학회논문집
• /
• 제11권3호
• /
• pp.294-299
• /
• 2008

본 연구는 구난역을 갖는 철도 터널 내에서 화재가 발생하였을 때 연기 전파 특성에 미치는 배연효과를 다루고 있다. 터널 화재 실험은 4cm의 정사각형 형태의 n-heptane$(C_7H_{16})$ 풀화재(pool fires)에 대해서 수행되었고 다양한 화재 발생위치에 따른 발열량을 측정하였다. 또한, 본 연구에서는 상용코드인 Fluent(Ver.6.3)를 사용하여 구난역을 갖는 철도 터널 내의 연층 전파 특성을 분석하였으며, MVHS(Modified Volumetric Heat Source) 모델을 사용하여 화재에 의한 연소생성물의 농도 및 거동을 예측하였다. 해석 조건은 다양한 화재 발생 위치에 따라서 측정 된 발열량을 이용하였다. 본 연구를 통해 교행로 내에 위치한 방화문에 의해 비사고터널로의 확산을 막을 수 있음을 보였고 특히, 배연시스템의 가동을 통해 유동방향을 변화시킴으로써 사고터널내의 연기 확산을 제어할 수 있음을 확인하였다.