• 생물환경조절학회지
• /
• 제31권4호
• /
• pp.401-408
• /
• 2022

최근 원예작물의 지속가능한 생산을 위한 작물 생육환경 센싱 기반 복합환경제어시스템 연구와 산업적 이용이 부각되면서, 노지재배에 적용하기 적합한 토양센서 활용 방안 연구가 활발히 이루어지고 있다. 본 연구는 산업 및 연구 현장에서 많이 사용되고 있는 TEROS 12 FDR 센서(frequency domain reflectometry sensor)를 노지 과수원의 토양에 알맞게 활용하기 위하여 국내 세 지역 과수원 토양의 토성별 FDR 센서 활용 방법을 제시하고자 수행하였다. 실제 과수가 재배되고 있는 각 과수원에서 토양을 채취하여, 토성 및 토양수분보유곡선을 조사하였으며, 토양별 TEROS 12 센서 Raw 값과 이에 대응하는 용적수분함량 값을 선형 회귀 분석, 3차 회귀 분석을 통해 보정식을 얻은 뒤 제조사에서 제공하는 광질 토양 보정식과 비교 분석하였다. 채취한 세 과수원의 토양은 모두 토성이 달랐으며, 토성에 따라 각 보수력에 따른 용적수분함량 수치에 차이가 있었다. 또한, TEROS 12 센서 보정식에서는 모든 토양에서 3차 회귀 분석 보정식이 결정계수 0.95 이상으로 가장 높게 나타났으며, RMSE도 가장 낮게 나타났다. 제조사에서 제공하는 보정식을 사용하여 TEROS 12 센서의 용적수분함량을 보정할 경우 토양에 따라 실제 수치에 비해 최대 0.09-0.17m³·m^-3가량 낮게 나타나, FDR 센서 사용시 적용 토양에 알맞은 보정이 반드시 선행되어야 함을 확인하였다. 또한 토성에 따라 토양의 보수력 구간에 따른 용적수분함량 범위의 차이가 있었으며, 토양 용적수분함량의 수치 해석에 보수력 정보가 수반되어야 할 것으로 나타났다. 또한, 사질이 많은 토양에서는 관수 개시점 측정을 위해 FDR 센서를 활용하는 데 있어 용적수분함량 측정 범위가 상대적으로 좁아 정밀도가 떨어질 것으로 판단되었다. 결론적으로 토양에서 FDR 센서를 통해 토양수분의 변화를 알맞게 해석하고 노지에서 알맞은 관수 시점을 선정하기 위해서는, 적용 토양의 수분보유특성을 파악하고 FDR 센서 보정을 선행하여 올바른 토양 수분 정보 제공이 필요할 것이다.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.175-179
• /
• 1992

본 연구에서는 LPG 기관을 천연가스 이용기관으로 변경하고자 할 때 발생하는 출력 감소를 보안하기 우하여, 공기연료 혼합비 조절, 점화시기조절, 과급효과 방법에 의한 출력향상 효과를 파악하였다.

• 한국미생물·생명공학회지
• /
• 제24권6호
• /
• pp.738-742
• /
• 1996

An efficient packed-bed type biofilm reactor charged with immobilized phototrophs was developed to treat organic wastewater at an extremely high volumetric loading rate. The packed bed reactor (PBR) charged with porous ceramic beads was superior to a fluidized-bed reactor suspended with activated carbon powders in terms of many aspects such as BOD removal efficiency, operational stability, and overall economics. For wastewater with BOD concentration as high as 20, 000mg/l, the BOD removal efficiency was maintained above 90% when the hydraulic retention time (HRT) was longer than 1 day. The allowable volumetric BOD loading rate of this reactor (20gBOD/l day) is more than ten-folds higher than that of an ordinary activated sludge method. The behaviour of the reactor was represented well by a Monod type kinetic equation with a maximum specific BOD loading rate(P) of 22.2gBOD/l day and a half saturation constant(K$_{s}$) of 1, 750 mgBOD/l.

• Journal of Multimedia Information System
• /
• 제5권1호
• /
• pp.35-42
• /
• 2018

Direct volume rendering (DVR) is an important 3D visualization method for medical images as it depicts the full volumetric data. However, because DVR renders the whole volume, regions of interests (ROIs) such as a tumor that are embedded within the volume maybe occluded from view. Thus, conventional 2D cross-sectional views are still widely used, while the advantages of the DVR are often neglected. In this study, we propose a new visualization algorithm where we augment the 2D slice of interest (SOI) from an image volume with volumetric information derived from the DVR of the same volume. Our occlusion-based DVR augmentation for SOI (ODAS) uses the occlusion information derived from the voxels in front of the SOI to calculate a depth parameter that controls the amount of DVR visibility which is used to provide 3D spatial cues while not impairing the visibility of the SOI. We outline the capabilities of our ODAS and through a variety of computer tomography (CT) medical image examples, compare it to a conventional fusion of the SOI and the clipped DVR.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.224-231
• /
• 1997

Microscopic examination for the morphological estimation of wear debris on the oil-lubrcated moving system is an accepted method for machine condition and fault diagnosis. However wear particle anaysis has not been widely accepted industry because it is dependent on expert interpretation of particle morphology and relies on subjective assessment criteria. This paper was undertaken to estimate the morphology of wear debris on the oil-lubricated movig system by computer image analysis. The wear test was performed under different sliding conditions using a wear test device made in our laboratory and wear testing specimen of the pin-on-disk-type was rubbed in pararline series base oil. In order to describe characteristics of debris of various shape and size, four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) have been developed and outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.11-18
• /
• 1997

Scientific volume visualization addresses the representation, manipulation, and rendering of volumetric data sets, providing mechanisms for looking closely into structures and understanding their complexity and dynamics. In the past several years, a tremendous amount of research and development has been directed toward algorithms and data modeling methods for a scientific data visualization. But there has been very little work on developing a mathematical volume model that feeds this visualization. Especially, in flow visualization, the volume model has long been required as a guidance to display the very large amounts of data resulting from numerical simulations. In this paper, we focus on the mathematical representation of volumetric data sets and the method of extracting meaningful information from the derived volume model. For this purpose, a B-spline volume is extended to a high dimensional trivariate model which is called as a flow visualization model in this paper. Two three-dimensional examples are presented to demonstrate the capabilities of this model.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.42-51
• /
• 1998

A 150 m$\^$3//hr, 30 kg/cm$\^$2/, air-cooled 3-stage reciprocating air compressor is designed to be used in starting large diesel engines of ships. A basic design procedure is presented to meet the targeted pressure and flow rate, and especially a volumetric efficiency of 80%. Temperature and stress analysis of the 1st stage cylinder are performed using axisymmetric FEM modelings. The dynamics of valve system is analyzed and stress at the 1st stage valve seat caused by valve impact is evaluated. To reduce friction loss and wear at the compressor engine system tribological design issues are reviewed and good design practices are suggested. Finally, forced-air pin-type interstage coolers are designed to dissipate generated compression heat at each stage.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.86-98
• /
• 2002

Defining the relationship between the quality of injection molded parts and the process condition is very complicate because of lots of factor are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation even though restricted application. In this research, Neural Network applied for finding optimal processing condition. The percent of volumetric shrinkage compared on each case and show neural network can be successfully applied selecting optimum condition not only within factor level but also between factor level.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.221-223
• /
• 2005

To make real 3D vision available, we have established a volumetric 3D display system that based on rotating LED matrix. The paper introduced a method to correct the problem that pixels are not symmetrical but circumferential in space, which causes the resolution of the edge area much lower than that of the central area.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.393-405
• /
• 2009

The Purpose of this paper is to show the applicability of a methodology, developed by the authors, with which to perform the mechanical optimization of space truss structures strongly restricted. This methodology use a parameter call "Volumetric Displacement", as the Objective Function of the optimization process. This parameter considers altogether the structure weight and deformation whose effects are opposed. The Finite Element Method is employed to calculate the stress/strain state and the natural frequency of the structure through a structural linear static and natural frequency analysis. In order to show the potentially of this simple methodology, its application on a large diameter telescope structure (10 m) considering the strongly restriction that became of its use, is presented. This methodology, applied in previous works on continuous structures, such as shell roof and fluid storage vessels, is applied in this case to a space truss structure, with the purpose of generalize its applicability to different structural topology. This technique could be useful in the morphology design of deployable and retractable roof structures, whose use has extensively spread in the last years.