• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.76-77
• /
• 2022

본 논문에서는 다시점에서의 자세 추정 결과를 정합하여 3D 볼류메트릭 데이터 시퀀스의 3D 자세 추정 결과의 떨림을 줄이는 방법을 제안한다. 볼류메트릭 모델을 중심으로 원을 그리며 일정 각도 간격의 시점에서 본 모델을 평면에 투사한다. 투영하여 얻은 2D 영상에 대해 Openpose를 이용하여 2D 자세 추정을 진행한 뒤, 2D 관절 정보를 정합하여 3D 관절 위치를 국한한다. 각도 간격에 따라 다른 3D 관절의 떨림의 정도를 수치화하여 표로 나타내고, 안정적인 결과를 위한 최소 조건을 확인하였다.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.1-6
• /
• 2014

This paper describes a method of estimating and evaluating the volumetric errors of multi-axis machine tools. The estimation method is based on a generic model that was developed from conventional kinematic error models for the geometric and thermal errors to help predict the volumetric error easily in various configurations. To demonstrate the advantages of the model, an application in the early stages of a five-axis machine tool design is presented as an example. The model was experimentally evaluated for a four-axis machine tool by using the data from ISO230-6 and R-test measurements to compare the estimated and measured volumetric errors.

• 터널과지하공간
• /
• 제15권2호
• /
• pp.137-144
• /
• 2005

이 연구에서는 최소자승법을 이용하여 절리의 직경분포를 추정하는 방법을 개발하였다. 이전에 Song and Lee가 제안한 방법에서는 현장에서 조사한 양끝내포선(contained trace) 분포로부터 무한 조사창에서 정의되는 절리선(joint trace) 길이 분포를 먼저 구하고 이 후에 직경분포를 구하게 된다. 그러나 새로 제안한 방법을 사용하면 중간 추정과정없이 현장에서 얻은 양끝내포선 분포로부터 바로 절리의 직경분포를 구할 수 있다. 이전의 방법과 비교할 때 새로 제안된 방법은 표본의 크기가 작을 때 조금 더 높은 추정정밀도를 보이며, 직경분포를 추정하는 과정에서 절리의 기하학적 파라미터의 하나인 체적빈도(volumetric frequency)도 제공한다. 새로운 추정법의 검증을 위해 Monte Carlo 시뮬레이션을 적용하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 춘계 총회 및 학술발표회
• /
• pp.45-46
• /
• 1994

기체분리막의 성능을 평가하기 위한 Manometric method의 몇가지 투과측정장치 중, High-Vacuum technique는 기체 투과계수, 확산계수 및 용해도계수의 정확한 값을 얻는데 가장 유용한 장치이다. 그러나 이 장치는 비용이 비싸고, 조작법이 복잡하며, 투과실험시 계 내의 투과측의 농도를 분석할 수 없고, 측정시간이 많이 걸리는 단점이 있다. 따라서 보다 간단하고 일반적인 측정장치는 막내 기체 확산계수의 측정에는 정확도가 떨어지지만, Low-Vacuum Technique 측정장치가 더 많이 사용되고 있다. Volumetric method는 조작법이 간단하며, 계 내의 농도분석이 가능하고, 측정시간이 빠르며, 비용이 적게 드는 장점이 있다. 일반적으로 Volumetric 투과특정장치로 투과계수는 얻었지만, 확산계수에 대해서는 극소수의 연구자들만이 언급하고 있다. 이는 실험하는 방법의 어려움과 기체의 막내 농도분포에 대해 수학적으로 적합한 모델의 해를 얻지 못한데 있다. 최근데 Lee 등은 Volumetric method을 이용한 확산계수의 평가에 대해 연구하여 신뢰성 있는 결과를 보여주었다. 따라서 본 실험은 Volumetric method를 이용하여 막내 기체 확산계수의 측정을 위해 온도, 압력및 분자직경에 따라 Standing time의 예측에 대해 검토하였다.

• Journal of information and communication convergence engineering
• /
• 제19권3호
• /
• pp.180-187
• /
• 2021

In this paper, we present a computational volumetric reconstruction method for three-dimensional (3D) photon counting imaging with enhanced visual quality when low-resolution elemental images are used under photon-starved conditions. In conventional photon counting imaging with low-resolution elemental images, it may be difficult to estimate the 3D scene correctly because of a lack of scene information. In addition, the reconstructed 3D images may be blurred because volumetric computational reconstruction has an averaging effect. In contrast, with our method, the pixels of the elemental image rearrangement technique and a Bayesian approach are used as the reconstruction and estimation methods, respectively. Therefore, our method can enhance the visual quality and estimation accuracy of the reconstructed 3D images because it does not have an averaging effect and uses prior information about the 3D scene. To validate our technique, we performed optical experiments and demonstrated the reconstruction results.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.325-330
• /
• 2014

Eddy current induction is used in a wide range of electronic devices, for example in detection sensors. Due to the advances in computer hardware and software, the need for 3D computation and system comprehension is a requirement to develop and optimize such devices nowadays. Pure theoretical models are mostly limited to special cases. On the other hand, the classical use of commercial Finite Element (FE) electromagnetic 3D models is not computationally efficient and lacks modeling flexibility or robustness. The proposed approach focuses on: (1) implementing theoretical formulations in 3D (FE) model of a detection device as well as (2) an automatic Volumetric Estimation Method (VEM) developed to selectively model the target finite elements. Due to these two approaches, this model is suitable for parametric studies and optimization of the number, location, shape, and size of PCB receivers in order to get the desired target discrimination information preserving high accuracy with tenfold reduction in computation time compared to commercial FE software.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.224-231
• /
• 1997

Microscopic examination for the morphological estimation of wear debris on the oil-lubrcated moving system is an accepted method for machine condition and fault diagnosis. However wear particle anaysis has not been widely accepted industry because it is dependent on expert interpretation of particle morphology and relies on subjective assessment criteria. This paper was undertaken to estimate the morphology of wear debris on the oil-lubricated movig system by computer image analysis. The wear test was performed under different sliding conditions using a wear test device made in our laboratory and wear testing specimen of the pin-on-disk-type was rubbed in pararline series base oil. In order to describe characteristics of debris of various shape and size, four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) have been developed and outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring.

• 한국정보컨버전스학회:학술대회논문집
• /
• 한국정보컨버전스학회 2008년도 International conference on information convergence
• /
• pp.145-150
• /
• 2008

This thesis explores the problem of reconstructing a three-dimensional(3D) scene given a set of images or image sequences of the scene. It describes efficient methods for the 3D reconstruction of static and dynamic scenes from stereo images, stereo image sequences, and images captured from multiple viewpoints. Novel methods for image-based and volumetric modelling approaches to 3D reconstruction are presented, with an emphasis on the development of efficient algorithm which produce high quality and accurate reconstructions. For image-based 3D reconstruction a novel energy minimisation scheme, Iterated Dynamic Programming, is presented for the efficient computation of strong local minima of discontinuity preserving energyy functions. Coupled with a novel morphological decomposition method and subregioning schemes for the efficient computation of a narrowband matching cost volume. the minimisation framework is applied to solve problems in stereo matching, stereo-temporal reconstruction, motion estimation, 2D image registration and 3D image registration. This thesis establishes Iterated Dynamic Programming as an efficient and effective energy minimisation scheme suitable for computer vision problems which involve finding correspondences across images. For 3D reconstruction from multiple view images with arbitrary camera placement, a novel volumetric modelling technique, Embedded Voxel Colouring, is presented that efficiently embeds all reconstructions of a 3D scene into a single output in a single scan of the volumetric space under exact visibility. An adaptive thresholding framework is also introduced for the computation of the optimal set of thresholds to obtain high quality 3D reconstructions. This thesis establishes the Embedded Voxel Colouring framework as a fast, efficient and effective method for 3D reconstruction from multiple view images.

• 산업경영시스템학회지
• /
• 제25권2호
• /
• pp.71-76
• /
• 2002

Defining the relationship between the quality of Injection molded parts and the process condition is very complicate because of lots of factors are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation in spite of restricted application. In this research, the Taguchi method md Neural Network are applied for finding optimal processing condition. The percent of volumetric shrinkage is compared on each case and shows neural network can be successfully applied.

• Applied Biological Chemistry
• /
• 제1권
• /
• pp.26-33
• /
• 1960

Organic mercurial fungicides, for seed treatments and dust formulations, has been increasingly used by farmers. Evaluation of the purity of organic mercurial fungicides has been performed by precipitation method at this laboratory. There are several methods for the an alyses of organic mercuric formulation, among which are (1) Precipitation met hod, (2) Volatilization method, (3) Volumetric method, and (4) Dithizon method. These methods, however, show some deffects in specificity (differentiation of organic form) and quantitativity. Polarography applied for the estimation of phenyl mercuric acetate was found to be simple, rapid and accurate. Tile fundamental method of polarography arid accuracy of analysis are discussed statistically and a satisfactory results was obtained.